CommodoreErie Posted December 27, 2022 Author Share #31 Posted December 27, 2022 Finished up the oars. None of them really came out the same, but that's fine. Better they all be slightly different than three be the same and one be off. But with this, I am calling this build done. Thanks for coming with me on this journey, and for your advice and encouragement along the way. Next model on my docket is the Model Expo Norwegian Sailing Pram. Tom E, Prowler901, bobandlucy and 2 others 5 Quote In Shipyard: 1:12 Norwegian Sailing Pram Completed Builds: 1:24 Lowel Grand Banks Dory Link to comment Share on other sites More sharing options...
wool132 Posted December 27, 2022 Share #32 Posted December 27, 2022 Congratulations on finishing your build and it looks mighty fine! Jonathan CommodoreErie 1 Quote Current Build: Zulu - Lady Isabella Completed Builds: Lowell GB Dory, Norwegian Pram, Lowell GB Dory Redux, Bounty Launch, Nisha, Lady Eleanor - Fifie On the Shelf: Ranger, Erycina, HMS Alert, etc, etc. Hibernating: Gunboat Philadelphia, Bluenose In a Time Vault Due to Open in 2025: Syren Link to comment Share on other sites More sharing options...
MrPross Posted January 1, 2023 Share #33 Posted January 1, 2023 Impressive build, any tips for someone about to tackle this same project? Quote Grand Banks Dory build log in progress Link to comment Share on other sites More sharing options...
CommodoreErie Posted January 5, 2023 Author Share #34 Posted January 5, 2023 On 1/1/2023 at 10:46 AM, MrPross said: Impressive build, any tips for someone about to tackle this same project? A couple: 1) Don't let perfect be the enemy of good. I've wasted so much time stressing tiny details that didn't look exactly right. If it looks close enough, it's good enough. 2) When beveling or shaping, I've found that sanding is better than using a hobby knife. It'll take longer, to be sure, but you have far more control over it. 3) When you get to painting, if you're using Model Expo acrylic, it'll be tacky for a while. It'll dry out eventually, but that's just a heads up. 4) Read and re-read each section before starting a new part of the build 5) Take it slow, and remember that a lot of mistakes are fixable or able to be hidden. Good luck on your build! wool132 1 Quote In Shipyard: 1:12 Norwegian Sailing Pram Completed Builds: 1:24 Lowel Grand Banks Dory Link to comment Share on other sites More sharing options...
Tom E Posted January 6, 2023 Share #35 Posted January 6, 2023 23 hours ago, CommodoreErie said: A couple: 1) Don't let perfect be the enemy of good. I've wasted so much time stressing tiny details that didn't look exactly right. If it looks close enough, it's good enough. 2) When beveling or shaping, I've found that sanding is better than using a hobby knife. It'll take longer, to be sure, but you have far more control over it. 3) When you get to painting, if you're using Model Expo acrylic, it'll be tacky for a while. It'll dry out eventually, but that's just a heads up. 4) Read and re-read each section before starting a new part of the build 5) Take it slow, and remember that a lot of mistakes are fixable or able to be hidden. Good luck on your build! Well said. Enjoy the journey and don't sweat the small stuff. Tom E CommodoreErie 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.