DaveBaxt Posted January 6, 2023 #1 Posted January 6, 2023 Just recieved the 3d printed hull from Vanguard Models and probably need to glue Walnut and probably brass to the structure. My question is what is the prefered glue for these tasks. Also I will need to paint this using acrylic paint if that is ok? Do I need to use a primer first and if so can I use a wood sealer or is a different primer required ? Best regards Dave AJohnson and mtaylor 2 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour
thibaultron Posted January 6, 2023 #2 Posted January 6, 2023 CA glue or epoxy to attach the wood and metal parts to the resin. Primer is needed for the resin and metal, if using acrylic paint. As to wood sealer, someone else will have to chime in. mtaylor and AJohnson 2 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial
DaveBaxt Posted January 6, 2023 Author #3 Posted January 6, 2023 1 hour ago, thibaultron said: CA glue or epoxy to attach the wood and metal parts to the resin. Primer is needed for the resin and metal, if using acrylic paint. As to wood sealer, someone else will have to chime in. Thank you Ron for your quick reply It is much appreciated. As I have some metal primer at hand , can I assume I can use this primer for both resin and metal primer or is different primer required? Best regards Dave AJohnson, mtaylor and thibaultron 3 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour
thibaultron Posted January 7, 2023 #4 Posted January 7, 2023 As long As it goes on with a lot of build up it will work well. DaveBaxt and mtaylor 2 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial
Dr PR Posted January 7, 2023 #5 Posted January 7, 2023 Use a primer with solvents that are safe for plastic. Test it first on an area that will not be seen on the finished model. I think plastic cement will probably bond brass to the printed parts. Epoxy will also work. It is more fuss than other single part glues, but (if mixed correctly) will bond just about anything to anything. I would use epoxy to glue wood to the printed part. mtaylor, thibaultron and DaveBaxt 3 Quote Phil Current build: USS Cape MSI-2 Current build: Albatros topsail schooner Previous build: USS Oklahoma City CLG-5 CAD model
DaveBaxt Posted January 7, 2023 Author #6 Posted January 7, 2023 Thank you guys for giving me something to work with. I am not sure I have anything other than wood/metal primer and or epoxy glues and CA but will do a few searches for plastic primer and see what I come up. It is always a good Idea to test with areas which can,t be seen first,so thanks for reminding me. Best regards Dave mtaylor and thibaultron 2 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour
thibaultron Posted January 7, 2023 #7 Posted January 7, 2023 If the metal primer is enamel it should be alright, avoid lacquer based ones on plastic. mtaylor and DaveBaxt 2 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.