USCG Harriet Lane by _SalD_ - Model Shipways - 1:96

[_SalD_]

Thanks for the advice druxey.  My daughter uses 'Tacky Glue' for her craft projects maybe I'll give that a try.

[_SalD_]

I decided to revisit the lower and topsail yards to make their center portion octagon-shaped.  For the octagon shape section I used some dimensional lumber from Midwest Products that I had purchased a while back.  I had to remove the jackstays and a couple of eyebolts to fit the battens. (sorry for getting my finger in the way)

Battens glued and tied.  Once the glue was dried the battens were stained and the eyebolts were reinstalled.

For the footropes and their stirrups I decided to use 30 gauge florist wire (blackened).

The stirrups were made by wrapping the wire around the yards a couple of times and then forming a small eyelet at its end. 

The footropes were then laced through the stirrups and the ends were wrapped around the yards.  I had to keep the jackstays off until all the stirrups and footropes were put on.

Completed yards.

This will be my last post in this build for a while because the wife and I will be heading back to Florida for the winter.  And since the ship is at a point that it can’t be easily transported it will have to wait until next spring to be finished. 😪

 

I would like to thank all those who have been following along with my build, for all the kind words and for all the likes.

 

Have a Happy New Year and see you in the spring.

[druxey]

Safe travels! Your footropes and stirrups look very neat.

[_SalD_]

Hello all, just a little update.  I’m back up in Connecticut but the shipyard has been commissioned by my wife and daughter for wedding preparations.   My daughter will be getting married this coming September and the wife being frugal as always has voluntary me to make all the table center pieces.  Therefore the shipyard will be shut down for a bit longer. Not that I mind, looking forward to the wedding.

 

Air brushed flowers

[druxey]

Well, that's an interesting change of pace! Thanks for the update.

[bobandlucy]

Sal, you're doing such nice work!

[chuckthedragon]

Sal, she's coming out beautifully!  I love the fact that you decided to ignore the "warnings" in the instructions about adding detail because it would be too difficult.  Your work on the bowsprit and jibboom is inspirational to me!  In other words, I will be copying you😊

 

You probably already know that William H. Webb designed and built the Harriet Lane.  I know it is late in the game, but I just this week discovered that Webb published a portfolio of his plans in 1866 or so.  The plans are on internet archive.  As it turns out, he built a first ship in 1855 that is identical to Harriet Lane, the America, for the Russian Government.  The bad news is that the kit is very inaccurate in certain respects, location of the wheel, use of chain trusses, number of boats, shape of the water closets, all of which you have already completed.  Also the kit omits a gaff on the foremast which is shown on the sail and spar plan of the America.

 

The plans for both ships are downloadable as tif files.  Here are the links, in case you chose to take a look.

 

https://archive.org/download/WEBB-BodyPlanCrossSectionsPlanHalfBreadthPlan/America - body plan%2C cross-section%2C centerline section%2C half-breadth plan%2C %26 gun-deck plan.tif

 

https://archive.org/download/WEBB-BodyPlanCrossSectionsPlanHalfBreadthPlan/America - spars %26 sails.tif

 

https://archive.org/download/WEBB-BodyPlanCrossSectionsPlanHalfBreadthPlan/Harriet Lane - body plan%2C cross-sections%2C centerline section%2C half-breadth plan %26 gun deck plan.tif

 

https://archive.org/download/WEBB-BodyPlanCrossSectionsPlanHalfBreadthPlan/Harriet Lane - body plan%2C profile%2C half-breadth plan%2C %26 berth deck plan.tif

 

[_SalD_]

Thanks for the information chuckthedragon, those are nice drawings you found.  Like you said, it's a little late for me but not for you.

 

And a little update.  Three more weeks to the wedding and I should be back modeling.

Center pieces finished.  Had to air brush all those flowers.

Bouquet, pocket squares and corsages ready .

Gift box and something that goes in the restrooms, done.

Still working on the head table decorations.

 

 

 

[chuckthedragon]

Well, Sal, maybe next time . . . .  I'm excited about the work you're doing on the rigging.  I'm planning to follow your example.  Happily for me the plan includes making sure I have all of my attachment point in before I permanently step the masts😁.

 

You are awesome to do all of that work for the wedding!  Blessings on your house!

 

Chuck