Jump to content

Recommended Posts

Are you speaking of the Dutch ship from 1628?   If that is the ship, there were several decks and each deck would likely have had different beam sizes and different distances between each beam.

 

If there is an inboard profile drawing or deck plans, these would show the beam sizes and spacing on each deck.  

 

An example is below.  It happens to be Antelope (50) 1703   You can see the beams in cross section so can determine sizes and spacing.

 

Allan

AntelopefromPROFILEMIDSHIPSHIGHRESOLUTIONJ3530.thumb.jpg.2143dc289182a4655e20392334b65c21.jpg

 

 

 

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

Lacking better information, the beams in late 17th century or even very early 18th century ships should be reasonably close regarding size and spacing for warships.  For merchant ships, it may be a different situation.  

 

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...