Bucasso Tool Storage

[kgstakes]

Would like to know if anyone is or has used this brand of tool organizer(s).  They have many different types and styles of organizers.

My work bench needs some better organization and just looking at options.

 

Picture showing one of their organizers.

 

[Jaager]

I question if something that  ..... fixed .... specifically organized..?  would serve very well  with ship modeling - which has many varied stages - each with different tools.

 

I have had good luck   using project Styrofoam.

2 inches thick - about the size of a brick --  Home Depot sells smaller sheets of 1" project Styrofoam 

It is porous -so PVA will bond two cut to size pieces  which is then glued to a 1/2" plywood base with a lip/porch on all 4 sides - a longer porch on one side makes for a handy stage for in-use tools.

Punch holes in the top of the foam using the tool handles and they standup - fixed - visible and ready to grab -  there can be a different brick for each type of work. Easy to move and store.

 

PVA will not melt it - most plastic glues will - a hot glue gun was a disaster -  PVA does not work with most plastic but most plastic is not full of tiny holes.

[Jaager]

I looked again -  and brick is a bit small   

4"x11"   6"x9    pick a size and hope it matches your need .

I also made a smaller "table"  with a 1" foam top.  I made holes in it to hold my carving chisels - the height set to keep the tips hanging suspended, but the base is a layer of foam "just in case" it is not high enough.  The suspension keeps the blades in view so I can see which is which - side slots hold my scrapers - you want a set of small size luthier's scrapers -  shop - boy is there a wide range of prices  for a set like this:

Peachtree's $25 does not seem that bad.