LinersWorld Posted December 3, 2024 #91 Posted December 3, 2024 Hi Brad, I’m only just discovering this topic now! I’m glad to have contributed to this project Canute and NavyShooter 2
NavyShooter Posted December 3, 2024 Author #92 Posted December 3, 2024 25 minutes ago, LinersWorld said: Hi Brad, I’m only just discovering this topic now! I’m glad to have contributed to this project Welcome aboard! Canute 1 Brad/NavyShooter Build Log: HMS Puncher by NavyShooter - 3D Print - 1/144 Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted Monday at 12:08 PM Author #94 Posted Monday at 12:08 PM We'll be launching the Titanic again on Thursday at 1 PM at the Halifax Public Gardens! I've redone some of the interior fiberglassing and put a fresh layer of epoxy resin on the entire outside. Additionally, I decided to add some 'puck' lights - so the upper decks will get lit up in the evenings. Pictures will follow! Ian_Grant and Canute 2 Brad/NavyShooter Build Log: HMS Puncher by NavyShooter - 3D Print - 1/144 Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted Wednesday at 12:03 PM Author #95 Posted Wednesday at 12:03 PM Titanic's test float was last night - ballast adjusted, and I think she's good. Here's some pics, and the new HMCS Sackville model as well. Both are being launched again tomorrow at the Halifax Public Gardens at 1 PM. NS Ian_Grant, yvesvidal, Canute and 1 other 4 Brad/NavyShooter Build Log: HMS Puncher by NavyShooter - 3D Print - 1/144 Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted 11 hours ago Author #96 Posted 11 hours ago Titanic and the new Sackville model have been launched into the Halifax Public Gardens for the season! I forgot to factor in the weight of the anchor chain on Sackville when I ballasted her, so she's showing as down by the bow just a bit. Oops. In the photo with two people holding the Sackville - I'm on the left, and Mr. Woodburn is on the right - he's the Chair of the Canadian Naval Memorial Trust. The Titanic Society of Atlantic Canada have a function this weekend, so the launch was well attended by them! Canute, yvesvidal and Paul Le Wol 3 Brad/NavyShooter Build Log: HMS Puncher by NavyShooter - 3D Print - 1/144 Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted 11 hours ago Author #97 Posted 11 hours ago And, now that my ship-yard has 13+ feet of ships cleared out of it, I'm going to be able to start thinking about my own models again!!! Ian_Grant, Canute and Paul Le Wol 3 Brad/NavyShooter Build Log: HMS Puncher by NavyShooter - 3D Print - 1/144 Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now