acaron41120 Posted yesterday at 03:18 PM Share #1 Posted yesterday at 03:18 PM When reading the instructions in the planking tutorial the components are the stem, stemson, keel, keelson, deadwood and stern post. But the Keel is one peace which makes me wonder if the actual shipwrights keel was one piece. I don't think so but that's how most kits are manufactured. (I don't know about scratch builders keels.) So were the actual ships built with a multi piece/section Keel or a single piece keel. Just wanting to learn more about this great hobby. Quote Allen Current Builds: Mayflower - 1:60; Golden Hind - 1:50 Past Builds: Marie Jeanne, Bluenose, Bluenose II, Oseberg, Roar Ege, Waiting to Build: Swift Link to comment Share on other sites More sharing options...
Solution Gregory Posted yesterday at 05:12 PM Solution Share #2 Posted yesterday at 05:12 PM (edited) There would have been any number of pieces. Mainly for strength, and also because it was not always desirable to obtain one dimensioned piece from a single piece of timber. Here is a little snip from Chuck's cheerful. Note the two long pieces of the keel have an overlapping( there is a technical term for that, but escapes me at the moment) joint. That joint ( scarf ) might have looked something like this on other ships/boats. One way to add more detail to a kit, is by scribing lines on the pieces provided in the kit. Edited yesterday at 05:14 PM by Gregory barkeater, GGibson and robert952 3 Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake (Scratch From MS Plans On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon Link to comment Share on other sites More sharing options...
acaron41120 Posted 2 hours ago Author Share #3 Posted 2 hours ago Thanks Gregory for the education. Not quite ready to scratch build yet but slowly moving in that direction. Quote Allen Current Builds: Mayflower - 1:60; Golden Hind - 1:50 Past Builds: Marie Jeanne, Bluenose, Bluenose II, Oseberg, Roar Ege, Waiting to Build: Swift Link to comment Share on other sites More sharing options...
Gregory Posted 18 minutes ago Share #4 Posted 18 minutes ago I'm sure you noted the idea about scribing some joint lines on your kit parts, but just in case, I'll mention it again. Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake (Scratch From MS Plans On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.