woodartist Posted November 26 #1 Posted November 26 What is best to use on the aluminum sanding discs to remove the sanding sheet and glue on disc? Quote
Solution kurtvd19 Posted November 27 Solution #2 Posted November 27 I use acetone. Get a bit undone and using a pipette or eyedropper put some acetone between the sandpaper and the disc. Keep adding the acetone as you peel the sandpaper off. If it's real hard to get the separation started apply some acetone the the top of the disc/sandpaper joint and let it work for a bit and you should be able to get the job started. You don't need a lot of acetone but apply it as you strip off the sandpaper right where the sandpaper is still stuck to the disc. Good luck. Kurt mtaylor, Ryland Craze, druxey and 1 other 3 1 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
druxey Posted November 27 #3 Posted November 27 Please use a respirator or very good ventilation when doing this. And no open flame, please! mtaylor and Ryland Craze 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.