ray111 Posted October 23, 2013 #1 Posted October 23, 2013 a rough log of the build of the Scottish maid a artesania latina wooden kit.
ray111 Posted October 24, 2013 Author #2 Posted October 24, 2013 started planking one side of the hull. maddog33 and Small Stuff 2
S.Coleman Posted November 11, 2013 #3 Posted November 11, 2013 Hello Ray. Off to a good start. Have a go at planking both sides at the same time, doing this will prevent the hull from warping or twisting. Looking good though. Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard
Small Stuff Posted November 17, 2013 #4 Posted November 17, 2013 Hello Ray - thanks for this interesting thread! That looks very intersting for my specially - I mull over her as a next kit, too. I found the drawing in my German copy of the "Search for Speed under Sail" from MacGregor and fall in love to her sideview quiet. Oh yes - but I'm affaid of her rigging! This looks so complicated and the picture of the kit in the web looks also not so easy! So I'll follow your built's progresses with intrest. My carpetmonster adapted to laminate flooring! GK - Modellbau No. 2002 a little boat 680 after E.Paris - PoF 1/50 AL 18021 Scottish Maid the 1st Aberdeen Clipper 1839 - PoB 1/76 (?) Dream: a hullmodel of the 66 55/95 tons US-Revenue drop-keel Cutter 1/2"=1ft, plans by H.I.Chapelle
ray111 Posted November 26, 2013 Author #5 Posted November 26, 2013 (edited) planked the other side of the top of the hull. Edited November 26, 2013 by ray111 mtaylor 1
M. Pajulahti Posted November 26, 2013 #6 Posted November 26, 2013 This is a very nice ship you're building there.Did you finished your Norske Love already? Current build: MS - USS Constitution 1:76 Previous builds: Corel - Flattie 1:25AL - Mare Nostrum 1:35Revell - Dom Fernando II e Gloria 1:200 Revell - USS Enterprise 1:720 Trumpeter - USS California 1:700
ray111 Posted November 26, 2013 Author #7 Posted November 26, 2013 just having a little break from building the Norske Love, the Norske Love is at the rigging stage of sorts, so I need to set up chain plates for the shrouds and a few other things for it, install the yard arms and sails etc..
ray111 Posted December 8, 2013 Author #8 Posted December 8, 2013 continued planking along one side, have to work out how to attach the stern plate at the rear of the model. mtaylor 1
ray111 Posted February 27, 2014 Author #10 Posted February 27, 2014 finished planking the base of the hull JesseLee 1
ray111 Posted February 27, 2014 Author #11 Posted February 27, 2014 added top strips to the hull and stern.
ray111 Posted February 27, 2014 Author #12 Posted February 27, 2014 Hi Brian, Its currently on hold, its at the rigging stage of sorts, just have to set up a few more chain plates. I started the Scottish Maid as a slight break on a simpler wooden model ship to build. Cheers Ray
ray111 Posted February 27, 2014 Author #13 Posted February 27, 2014 added timber spine and trimmed stern planks.
John Paul Jones Posted February 27, 2014 #14 Posted February 27, 2014 Hi! I have this same kit. I bought it 28 years ago in Palma Spain while I was in the Navy. It is still in the box in the garage waiting to be built. I'll be following your build to get the courage to do mine.
ray111 Posted February 27, 2014 Author #15 Posted February 27, 2014 puttied stern, puttied around bow since theres a gap with the spine there.
ray111 Posted March 10, 2014 Author #17 Posted March 10, 2014 contined double planking the hull JesseLee 1
ray111 Posted March 11, 2014 Author #18 Posted March 11, 2014 finished double planking one side of the hull.
ray111 Posted March 12, 2014 Author #19 Posted March 12, 2014 finished double planking the base of the hull.
storekeeper Posted March 12, 2014 #20 Posted March 12, 2014 just got this kit a week ago and am glad to see some one building it ray111 1
ray111 Posted March 12, 2014 Author #21 Posted March 12, 2014 added planks to stern to cover puttied stern
ray111 Posted March 18, 2014 Author #22 Posted March 18, 2014 drilled various holes in the deck, mounted the base of the 2 main masts and the mizzen mast.
ray111 Posted March 18, 2014 Author #23 Posted March 18, 2014 the mizzen mast was at a to steep an angle, have extracted it and reseated the mizzen mast.
ray111 Posted March 19, 2014 Author #24 Posted March 19, 2014 i meant bow sprit not mizzen mast a little mix up in terminalogy.
ray111 Posted October 19, 2014 Author #29 Posted October 19, 2014 added chain plate holders to the sides of the vessel.
ray111 Posted October 19, 2014 Author #30 Posted October 19, 2014 drilled a few more holes in the deck for the anchors, added some deck furniture.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now