Stuntflyer Posted January 7, 2014 #1 Posted January 7, 2014 I'm looking for a planking scraper that has multiple curved shapes. I remember seeing it somewhere on the site but lost the link to where to buy it. Anyone know where I can get one? Thanks Quote Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey
Stuntflyer Posted January 7, 2014 Author #2 Posted January 7, 2014 Found it here. . . http://www.leevalley.com/en/wood/page.aspx?p=32639&cat=1,310,41069&ap=1 Peaksol 1 Quote Current build - Sloop Speedwell 1752 (POF) Completed builds - 18 Century Longboat (POB) , HM Cutter Cheerful 1806 (POB), HMS Winchelsea 1764 (POB) Member: Ship Model Society of New Jersey
grsjax Posted January 7, 2014 #3 Posted January 7, 2014 Similar set is available from Amazon Quote My advice and comments are always worth what you paid for them.
Pete38 Posted January 7, 2014 #4 Posted January 7, 2014 Woodcraft also has a nice selection http://www.woodcraft.com/category/3/1005232/1002068/Scrapers.aspx Quote Triton Cross Section 1:32 SEE YA LATER
dgbot Posted January 7, 2014 #5 Posted January 7, 2014 Scrapers are nice but you have to know how to keep the honed. David B Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/
Modeler12 Posted January 12, 2014 #6 Posted January 12, 2014 I have used a hand scraper (flat) for many years while making furniture and other 'large' projects. They are great for long strokes, but I have found them to be rather limited for small places such as ship models. Unless the curvature of your deck (or other surfaces) are just about right for the scraper, go at it. But if you have to make several 'adjustments' as you go along, you may be asking for more work than necessary. Keeping a nice curl on a flat one requires some filing or sanding to get a good flat edge, and then a honing iron to put that little curl on the edge. Again, to do that on a curves scraper could be a bit more difficult. Quote Jay Current build Cross Section USS Constitution http://modelshipworld.com/index.php/topic/10120-cross-section-forward-area-of-the-uss-constitution/ Finished USS Constitution: http://modelshipworld.com/index.php?/topic/103-uss-constitution-by-modeler12/ 'A picture is worth a . . . . .' More is better . . . .
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.