michael mott Posted January 27, 2014 Share #1 Posted January 27, 2014 This small board works well for plastic. or wood. I use a low angle block plane on a 1/4 inch acrylic base. the base is stroked with a little candle wax to lubricate the plane. In the video the plastic block is approximately 3/8 inch thick x 1 inches wide the plastic is evergreen styrene strips glued together. Michael mtaylor and Mike Y 2 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
Mike Y Posted October 15, 2014 Share #2 Posted October 15, 2014 Thanks a lot! Very elegant solution, and looks more precise then a similar sanding station design. Quote Current build: Beavers Prize - POF 1:48 (Hahn style) Side builds: Schooner Polotsk by Master Korabel 18th Century Longboat by MS Finished: 21ft English Pinnace by MS Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.