Silva Posted September 1, 2014 Share #1 Posted September 1, 2014 Hello everyone! Last week, while searching for a good table saw for my little workshow, i stumbled across this 7 year old german article from model ship builder Uwe M. Karl (maybe anyone knows him?) about this Tablesaw from a croatian precision engineer. It says, the saw is popular in the croation model building scene.http://www.modellmarine.de/index.php?option=com_content&view=article&id=1103:tisch-feinschnitt-kreissaege-fuer-holzwuermer&catid=202 I tried to contact the author but dint get a response (yet). Does anyone here know about this tablesaw and how to contact the builder of it? Also, alternatively i'm looking at the Byrnes tablesaw, could anyone tell me whats the maximum cutting depth with the biggest saw blade on it?Thank you!-Benjamin Quote Link to comment Share on other sites More sharing options...
mtaylor Posted September 1, 2014 Share #2 Posted September 1, 2014 Per the specs on Jim's site.. 15/16" using the 4" blade (23.8 mm using the 101.6mm blade). Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Silva Posted September 1, 2014 Author Share #3 Posted September 1, 2014 Oh 20mm is too little for me unfortunately. The croatian one has 30mm maximum cutting depth with 100mm blades wich would be ok for me. If anyone has other recommendations, please let me know =) Quote Link to comment Share on other sites More sharing options...
mtaylor Posted September 1, 2014 Share #4 Posted September 1, 2014 I'm with Brian... you'll need a band saw for that thick of wood. Er.. maybe... that seems to be for the 3" blade. You might go here: http://www.byrnesmodelmachines.com/tablesaw1.html Check it out and contact Jim. He could tell you for certain. WackoWolf 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.