-
Posts
2,060 -
Joined
-
Last visited
Reputation Activity
-
mtdoramike reacted to DenPink in Sovereign of the Seas by Denis R - FINISHED - Mantua - 1:78 scale
Start of the cabin area ( windows ) .
One coat of stain on the lower hull and one coat of satin varnish.
Denis.
-
mtdoramike reacted to DenPink in Sovereign of the Seas by Denis R - FINISHED - Mantua - 1:78 scale
Last coat of black on the curves and brass now fitted, cap rail was pre finished ( sealed then a coat of stain, 2 coats of satin varnish )
-
mtdoramike reacted to DenPink in Sovereign of the Seas by Denis R - FINISHED - Mantua - 1:78 scale
Hi all
The ply board that the curves are on require cutting up into 7 pieces, the parts that make up the curves have to be soaked in water then I used an electric plank bender to form the curves.
The decks have 2 good coats of sanding sealer and only sanded them down ( will varnish later ).
The curves have 2 coats of sealer and 2 thin coats of thin black acrylic.
Denis.
-
mtdoramike reacted to HIPEXEC in USS Constitution by Hipexec - FINISHED - Constructo - 1:82
Starboard side lids installed.
-
mtdoramike reacted to HIPEXEC in USS Constitution by Hipexec - FINISHED - Constructo - 1:82
The port side gun lids are installed. I have 7 more to do on the starboard side. I'll probably re-do some of them after all are installed since I'm not happy with some of them. They're tricky little devils to install.
-
mtdoramike reacted to HIPEXEC in USS Constitution by Hipexec - FINISHED - Constructo - 1:82
I just finished shaping, pinning and gluing on the stern davits.
-
mtdoramike reacted to PMG in HMS AGAMEMNON by PMG - Caldercraft
Second planking is going ahead, slowly but safely.
The upper side of the starboaed side is now roughly made.
It still needs a lot of work...
First, filling some hollow zones,
Second filling the small gaps,
Third, cutting acurately the gun ports ( and here I realised that painting the sills was a waste of time, as you damage anyway the painting)
Fourth, sanding, sanding and sanding.
Here are some pictures.
May be that it can give some inspiration to Sjors about the quarter galleries.
Pierre
-
mtdoramike got a reaction from maddog33 in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Just remember when building, there are no mistakes, just happy coincidences
-
mtdoramike got a reaction from src in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Just remember when building, there are no mistakes, just happy coincidences
-
mtdoramike got a reaction from WalrusGuy in Here is a few of the models that I have built over the years
I have built Two Constitutions the first was the Mamoli kit and the other was the Model Shipways kit
I have built a number of the Constructo kits including: Mayflower, Bounty, Pandora, San Mateo & King of the Mississippi paddle wheeler and the Cutty Sark.
I also built the America which was a Leclur kit and the Bluenose which was another Model Shipways kit.
I have built the Mamoli L'Orenoque
These are a few others.
-
mtdoramike got a reaction from yvesvidal in Here is a few of the models that I have built over the years
I have built Two Constitutions the first was the Mamoli kit and the other was the Model Shipways kit
I have built a number of the Constructo kits including: Mayflower, Bounty, Pandora, San Mateo & King of the Mississippi paddle wheeler and the Cutty Sark.
I also built the America which was a Leclur kit and the Bluenose which was another Model Shipways kit.
I have built the Mamoli L'Orenoque
These are a few others.