-
Posts
702 -
Joined
-
Last visited
Reputation Activity
-
dragzz got a reaction from SGraham in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok here in this pic i have glued the two rear bulwarks . its was not that hard to do all i did was soak in water for 45 mins then i clamped then in place till thay was dry after that i glued them in place as u see in the pic. iam doing a lot better now then i was befor .here the pic of where iam at now
-
dragzz got a reaction from yvesvidal in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
hello all so what i have done is sanded the bulkheads to angel right for the planking u will in the pic i got it just took my time on this part. as it must done the right way so here some pic for u all
-
dragzz got a reaction from mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
hello all so what i have done is sanded the bulkheads to angel right for the planking u will in the pic i got it just took my time on this part. as it must done the right way so here some pic for u all
-
dragzz reacted to popeye the sailor in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
I could never wrap my head around planking them before cementing them together either Dragzz........you'll be able to blend the stern in better. very nice.........looking good!
those are the bow rabbits
-
dragzz got a reaction from yvesvidal in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok popeye in the pic u will see where i mark its for the block for the mast is this what u was talking about. glue a block in there befor i go further in the build. hope this is right
-
dragzz got a reaction from yvesvidal in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok some work that i have done last night. i did not put in the mast blocks yet as iam going out today to get some wood for it so i can put them in place befor i do more work. but i did put all the deck in place now here some pic for ya all.
-
dragzz reacted to popeye the sailor in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
I haven't read an instruction sheet yet, that has these dimensions.........however they are quick to point out that some experience in model ship construction is required. go figure
-
dragzz reacted to mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
Hi Mate,
OK, looking at the box lid there didn't appear to be any rake at all so for my money I would just drill straight down, ensuring the drill is vertical to the bulkheads.
You don't need any particular wood to make the mast seat, any old scrap piece would do.
Your doing good Dragzz, keep it up.
Be Good
mobbsie
-
dragzz got a reaction from Aussie048 in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok some work that i have done last night. i did not put in the mast blocks yet as iam going out today to get some wood for it so i can put them in place befor i do more work. but i did put all the deck in place now here some pic for ya all.
-
dragzz got a reaction from mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
popeye and mobbsi i did go over the plans 2 times and read the book 2 time there is nothing about the rake at all so iam stuck there if u can help ples. not to sure what to do there iam not at the stage yet just thot i let u both know now befor i get to it thanks
-
dragzz reacted to mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
Hi Dragzz,
Popeye's right mate, the more you do now the more you will save yourself grief later.
Before you drill the mast seats (if you haven't already ) check the mast rake, you may have none at all but it's as well to check now.
Only use enough glue to do the job at hand, trying to clear glue up later is a complete pain in the proverbial.
Be Good
mobbsie
-
dragzz reacted to popeye the sailor in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
exactly........gluing pieces in there now will save you a lot of grief later on. you won't need to go that deep, but in the end, you'll have enough for a decent mast root.
-
dragzz got a reaction from Aussie048 in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok popeye in the pic u will see where i mark its for the block for the mast is this what u was talking about. glue a block in there befor i go further in the build. hope this is right
-
dragzz got a reaction from mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok popeye in the pic u will see where i mark its for the block for the mast is this what u was talking about. glue a block in there befor i go further in the build. hope this is right
-
dragzz got a reaction from mobbsie in HMS Agamemnon by mobbsie - FINISHED - Caldercraft / Jotika - 1/64
mobbsie when u seen the mail man i bet u ran right to him befor he got to the door lol..vary nice gear u got there have fun with it
-
dragzz got a reaction from yvesvidal in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
this is a new build of the billing boats. st roch 605 1.72 scale this going to be a fun build the boat sits in vancouver iam 4hrs away from there . so here are some pic of the boat kit
and yes its all here in the kit i did a check list of all the parts .ps i took a break and yes iam back
-
dragzz got a reaction from HIPEXEC in USS Constitution by Hipexec - FINISHED - Constructo - 1:82
looking vary nice so far great work u are doing there
-
dragzz got a reaction from Mirabell61 in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok now i have one side done with the ribs now glued in place all is going well . all the ribs fit in place just fine so here some pic for ya of where iam at .
-
dragzz got a reaction from mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
so now the dry fit the ribs was good iam starting to glue then in to place here where iam now the ribs are nice and in place the right way here a pic
-
dragzz got a reaction from mobbsie in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok now i have one side done with the ribs now glued in place all is going well . all the ribs fit in place just fine so here some pic for ya of where iam at .
-
dragzz got a reaction from Mirabell61 in SS Bohuslän 1914 by Mirabell61 - FINISHED - Billing Boats - scale 1:50 - Swedish museum steamer
u have done a vary good job on that ship the craftmenship is sec to none keep up the great work
-
dragzz got a reaction from popeye the sailor in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
ok popeye what do u mean by the rake not to sure what that is sorry .
-
dragzz reacted to popeye the sailor in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
looks like your missing the blocks, anchor{s}, and assorted hardware. well, at least you'll be able to assemble the hull and decking while you wait. these split hulls are OK......but I see no slotting for the masts. the holes are in the decking, so you can drill them yourself. be sure to give them the proper rake. my AmericA was the same design, but there were slots.......all I did was cement a piece of wood on both sides and drill down through, so the masts wouldn't go side to side when you put them in. you'll also need to add a mast root....the dimentions they show are from the deck up. you'll have fun with this build.......it's a nice kit
-
dragzz got a reaction from yvesvidal in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
well here i start the build of the st roch by billing boats still waiting on some parts there for the upper deck so i can put on the deck that about as far as i can go till the parts come in and yes popeye i did go over all of the stuff again still came out the same as the frist time i check it . so here is the ribs in place thay are not glued yet just doing a dry fit frist to see if thay all will fit well so here a pic where iam now.
-
dragzz got a reaction from Q A's Revenge in St Roch 605 by dragzz - Billing Boats - 1/72 - new build
this is a new build of the billing boats. st roch 605 1.72 scale this going to be a fun build the boat sits in vancouver iam 4hrs away from there . so here are some pic of the boat kit
and yes its all here in the kit i did a check list of all the parts .ps i took a break and yes iam back