Jump to content
Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order. ×

Matt D

NRG Member
 View Profile  See their activity

  • Posts

    628

  • Joined

  • Last visited

 Content Type 

Everything posted by Matt D

  1. Matt D
    Thanks, Stevinne. I’m glad to have found this forum to share with.
  2. Matt D
    Thanks. Like everyone else, I'm critical of my own work and see all the mistakes. But on the whole, I think it will look pretty good once it's finished and installed on the deck. I did bend the kit piece. I did exactly what Wallace did - soaked it in hot water for half an hour and then rubber-banded it to my glue bottle overnight. I worked like a champ, but I was prepared for a hard time based on your log. If I recall correctly, yours had the grain running across the bend - or at least the majority of layers in the plywood. Mine (and presumably Wallace's) were in the correct direction to bend pretty easily. That might be pure conjecture, but it's the best I can figure.
  3. Matt D
    Thanks, Wallace! Everything I know about deck planking, I learned in the build logs. Otherwise I would surely have followed the directions and planked in full length strips. I sanded mine because I’m not really sure how scraping is better. I used a mechanical pencil to simulate the caulking. I’m pretty happy with how it looks right now.
  4. Matt D
    While I was waiting for planks to dry, I worked on some of the deck furniture. I wasn’t very happy with the instructions on the cargo hatch. They seem to indicate that the inside needs a ledge on all four sides. That makes the cut precision very demanding on an item that is forever enclosed. So instead, I only made ledges on the ends where they are needed to hold the covers up. For those building this kit who haven’t built the hatch yet, the width on the hatch is dictated by the side strips, which are called out to be 27mm. The covers are each 9mm stock. That makes for a tight fit - especially if your cut is a little shy of 27mm. If I had to do it over, I’d aim for a solid 27.5 or 28mm. I had to sand the covers to take a tiny bit off. There are a lot of cross-cuts to make in this model. Since this is my first, I’m still coming up with methods. I think this one is worth sharing: I built a cross-cut sled for my scroll saw. It works great.
  5. Matt D
    Over the weekend, I made some progress on the hull planking. I started out using the nails in the kit, but I couldn’t get the depth right consistently. I’d either not get them in far enough and they’d pop back out, or I’d drive them all the way in, where I can’t cut the heads off easily. So I decided to try some tee pins pushed in by hand. Those along with some binder clips are working well.
  6. Matt D
    Wallace, Peter, and Nikbud, I’ve read all of your Virginia build logs. They were instrumental in my choice of this model for my first ship. I know I will do a better job because of what I’ve learned from you and a few others on this site. It made my day that you guys checked in on my log.
  7. Matt D
    Hi, fellow model makers. My name is Matt and this is my first wooden ship build. I picked this model based mainly on research done on this site. It has all of the elements I wanted to get to build - such as: Double plank on bulkhead Finished mahogany hull Two masts Nice looking rigging I started about a week ago. Here are photos of my progress before the weekend.
  8. Matt D
    I’m new to this forum, and I really appreciate all the effort you have all put into spreading your knowledge of this fascinating hobby. Thanks, Matt

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...