-
Posts
606 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Matt D
-
Chuck, thank you for putting in the effort to show this several ways. My favorite is the natural wood shingles withe the top painted to match the frieze.
- 1,784 replies
-
- syren ship model
- winchelsea
-
(and 1 more)
Tagged with:
-
That looks great, Doug. Does that mean the deadeyes will snap into the eyebolts?
- 79 replies
-
- marisstella
- barque
-
(and 1 more)
Tagged with:
-
My gun ports are all framed in and faring is pretty close to complete. I’ve taken my time and had to fix a few problems. I broke both sides of bulkheads 25 and 27 early on. That mainly happened because I messed up the installation of 25 and had it off center by about 1/16th. It did look bad until I started sanding and could really see it proud on one side and recessed on the other. I was trying to cut it free and broke one upright. It all turned to crap as I tried fixing it and ended up with a new pass through the scroll saw. As you can see, I did some reinforcing on the new ones. I also broke the starboard upright on A and fixed it with a bridge. In these pictures, the stern frames are just dry fit so I could see how they look.
-
Model Shipways Fair American vs Syren US Brig
Matt D replied to WalrusGuy's topic in Wood ship model kits
Dave, babies sleep through way more than you might think. Especially if you condition them by not trying to keep the house quiet all the time. I learned this with twins who have now survived to the age of 12. The hard part is that you have to get the baby's mother out of the house! Walrusguy, interestingly enough, my first build was AL Virginia 1819 and I have Fair American sitting on the shelf in the shipyard. It was supposed to be my next build. But I've been distracted from starting it because I couldn't resist Chuck's Winchelsea group project. It will probably take me about a century to complete, so I have no idea when I'll get around to Fair American. -
I am getting the gun port sills and lintels ready. I cut them all out using my calipers to find the lengths and then using my home made scroll saw crosscut sled. That setup lets me accurately cut both sides at the same time. First, I measured the gap at the bulkhead former. Then transfer that length to the crosscut sled stop Then cut two sills or lintels at once. I still had to sand a little to get a good fit, but I did that together as well to ensure the same length on port and starboard.
-
Rusty, your gun port frames look terrific! Nice job!
- 642 replies
-
- winchelsea
- syren ship model
-
(and 1 more)
Tagged with:
-
Thank you, sir. I’m having fun building her, but there’s no way I could take on such a challenge outside of a group project. I’m very thankful to have my MSW friends.
- 195 replies
-
- enterprise
- constructo
-
(and 1 more)
Tagged with:
-
Happy Birthday! This is the kit that first got me interested in ship models. I have it on the shelf right now. I’m going to pull up a chair and watch your build. It looks great so far.
- 195 replies
-
- enterprise
- constructo
-
(and 1 more)
Tagged with:
-
I’ve now fully recovered from my scaling error and am ready to move on. One upside is that I used a softer plywood for the bulkheads this time. I was using 5-ply Baltic birch. My former is still made of that, but the bulkheads are now Home Depot grade birch plywood, which is filled with something much softer and lighter than 5-ply Baltic birch. That should make fairing much easier. I’m now ready to start gluing bulkheads into position and fairing the hull.
-
You’re still getting in on the ground floor, Rusty. As far as I can tell, no one is done with chapter one yet and several of us have had to back up a step or two. I think you’re starting at a perfect time. I really like that there are so many of us to share this build with. Welcome aboard, mate!
- 642 replies
-
- winchelsea
- syren ship model
-
(and 1 more)
Tagged with:
-
I learned a nice little printer hack for the bulkheads yesterday. I was desperate the get the bulkhead formers printed and my printer only does 8-1/2", so it won't make the 11x17 prints for the mid and aft pages (1 and 2). I was playing with settings in the print set-up and found that those two pieces would fit on 8-1/2x14 legal size sheets with the size set to 100%. I don't keep legal size paper around because it's generally useless to me. But I dug around and found a 20 year old mortgage package in my filing cabinet. It's a half inch thick packet of legal size pages printed single sided with one staple that was easy to remove. I sold that house nine years ago so I don't think I really need that mortgage package anymore - at least not the last two pages of boilerplate. Into the printer and onto my plywood!
-
Hi Boyd: The step I skipped was to verify the scale on the print-outs. If you lay your scale on it, you should be able to confirm that the prints are the right size. Here is a picture of what it looks like. Good luck with your sheets - I hope they came out the correct size. The good part for me is that the second set of frames is coming out much better than the first. Apparently, I needed an extra ten or twelve hours of practice on my scroll saw!
-
Thank you guys for all the nice words of encouragement. And thanks for the likes. I’m leaping right back to work on Winnie frame V2.0. Luckily, I had enough Baltic Birch 5 ply to make the bulkhead former and I have plywood for the bulkheads as well. So I’m taking advantage of the fact that the admiral is at work today and I’m at home.
-
I have suffered a major setback on my Winnie project. I had thought that my large sheets were a little oversized because I printed them on a 34x44 plotter. But I had it set to 100% scale. Apparently, those sheets are right and my bulkhead sheets were printed a little small. I found out when I put the keel on and then laid it on the full size sheet. The keel goes exactly to the end on the sheet and my false keel comes up short. I did a little more testing and determined that every plywood piece is small. I have to cut the whole thing out again. Luckily, I think I can salvage the keel and stem using my #11 ungluer.
-
I received my chapter 1 parts just before leaving town for work. So I couldn’t get much done for a couple of weeks. I’ve assembled, tapered, and installed the stem pieces along with the rabbet. Now, I’m working on the keel. Chuck, I’m struggling in my mind with the false keel. According to the parts list, there is one piece that is 1/4 x 5/64 and 15 inches long. And that’s what is in my chapter 1 set. That piece won’t cover the full length of the keel. Is there another piece that I’ve overlooked?
-
It looks like you're doing an excellent job on her. I like your use of two standard mini-vises in lieu of a purpose-build keel vise. I like the Constitution as a subject because it's a ship you can still go see today.
- 55 replies
-
- constitution
- model shipways
-
(and 1 more)
Tagged with:
-
Of that, I am certain! Plus, this model will be on the build board for a long time because there's a ton of work to do before planking! I suspect that I will need to build a hull contoured cradle for it to sit in at that point, and that replace the 90° stands with cradle pieces. Chuck, it's a long ways down the road, but I thought I read in your log that there will be a longboat for Winnie. Is that true? If so, I'm really looking forward to it.
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.