Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order.
×
MikeB4
-
Posts
322 -
Joined
-
Last visited
Reputation Activity
-
MikeB4 got a reaction from Aussie048 in Phantom by MikeB4 - Model Shipways - scale 1:96
I've glued the stanchions in place and decided to paint them white.
-
MikeB4 got a reaction from russ in Phantom by MikeB4 - Model Shipways - scale 1:96
I've glued the stanchions in place and decided to paint them white.
-
MikeB4 reacted to dragzz in HMS Victory by dragzz - Corel - scale 1/98
ok i have got the ribs on the keel only as a dry fit so far look good but some of the rib still need a bit of work to them yet . not goign to glue till there right here some pic
-
MikeB4 reacted to enemeink in Phantom by MikeB4 - Model Shipways - scale 1:96
One thing that I did when I built the Phantom, and I have suggested others to do is add a watered down mixture of wood glue to the bulwarks to give them some strength. When you're shaving them down and carving out scuppers the thickness is scary. It's Looking Good! brings back memories of cutting copper tape and plating the hull. that's the only thing I didn't like about this kit. and the one I'm currently building.
-
-
MikeB4 got a reaction from egkb in Phantom by MikeB4 - Model Shipways - scale 1:96
I cut out my scuppers very carefully and I managed not to collapse anything. I feel this is a turning point for a beginner on this project because this is were I think the biggest disaster would have taken place. I know I'm a long way from being done but I'm feeling pretty good at this point.
-
MikeB4 got a reaction from egkb in Phantom by MikeB4 - Model Shipways - scale 1:96
got my deck planking and waterway just about done.
-
MikeB4 reacted to russ in Phantom by MikeB4 - Model Shipways - scale 1:96
Looks very clean. Nice work.
Russ
-
MikeB4 reacted to sudomekh in protective coating on coppered hull
Copper does not advocate working on a stand ... Styrofoam
-
MikeB4 got a reaction from egkb in Phantom by MikeB4 - Model Shipways - scale 1:96
I've decided to install the rudder at this point in the build.It fit like a hand in a glove I have no glue holding this thing on I wish everything would fit like that. My method was to insert a pin near the bottom of the rudder.The hard part is creating and mounting the gudgeons and pintles. that was a test of my patience that I'm glade is done.
-
MikeB4 got a reaction from russ in Phantom by MikeB4 - Model Shipways - scale 1:96
I've decided to install the rudder at this point in the build.It fit like a hand in a glove I have no glue holding this thing on I wish everything would fit like that. My method was to insert a pin near the bottom of the rudder.The hard part is creating and mounting the gudgeons and pintles. that was a test of my patience that I'm glade is done.
-
MikeB4 got a reaction from russ in Phantom by MikeB4 - Model Shipways - scale 1:96
I've finally finished coppering the hull. I've learned a few good lessons that will carry over to a future project.
-
MikeB4 reacted to rtropp in protective coating on coppered hull
Mike,
I think I have at least one mail order US source. If it checks out I will post it.
RT
-
MikeB4 reacted to craigb in Phantom by craigb - FINISHED - Model Shipways - Solid Hull
Final Post.
I received the acrylic (PlexiGlas) sheet from TAP, and after the pieces collecting dust for a long time, finally glued up the case. I intended to also fashion a nice looking base, but for now, the case just sits over the model. Maybe in another few years…
You can read a mini-tutorial on making your own case for cheap HERE.
A final parting shot of the Phantom on top of one of our bookcases.
Happy sailing.
-
MikeB4 got a reaction from egkb in Phantom by MikeB4 - Model Shipways - scale 1:96
I've finally finished coppering the hull. I've learned a few good lessons that will carry over to a future project.
-
-
MikeB4 reacted to captainroger in protective coating on coppered hull
Hi Mike,
a glossy coppered surface maybe appears too shiny and not realistic.
Better to protect the surface with some sort of removable material.
Try with the clear plastic used to envelope the food for the fridge.
You can substitute it from time to time as it wears.
Captainroger
-
MikeB4 got a reaction from Craigie65 in protective coating on coppered hull
Can I spray a clear coat of some sort maybe acrylic over the copper plates to harden and protect them from lifting up during construction once the hull is fully coppered. The reason I ask this question is because now that I have my phantom fully coppered I am having a hard time handling the hull without damaging the copper.
-
MikeB4 got a reaction from egkb in Phantom by MikeB4 - Model Shipways - scale 1:96
Started coppering the hull today. It's a very time consuming task. I've got about seven and a half hours into it today that includes cutting the copper.I haven't cut all the copper yet. I'll put the plates that I've cut so far on the hull and then finish the rest of them up later.I'm moving along slowly but surely or not so sure but definitely slow,The key is keep moving.
-
MikeB4 got a reaction from JesseLee in Phantom by MikeB4 - Model Shipways - scale 1:96
I've shaped and fitted the rudder to the stern.I was a little nervous about this step because you have to drill a hole, but it was relatively easy. I do recommend creating the rudder before drilling so you can line things up with a physical object rather than guessing if you have it right. Another technique I find helpful is to put a piece of tape on the drill bit leaving only 1/8" exposed so you don't drill to deep.
-
MikeB4 got a reaction from Aussie048 in Phantom by MikeB4 - Model Shipways - scale 1:96
It's taken some time but I've finally shaped the outer hull. It's not perfect but I've got it to a point that I feel satisfied with it.This boat might not turn out to be a museum quality model but I'm pleased to have gotten this far. I also found the way Chuck has you cut the curve of the stem using pieces of 1/8" strip wood has its challenges. I found it next to impossible to get a good bond when you try joining the angled strip to the straight strip.The problem is that there's no way to clamp it. So even though I let the glue try for 24 hours when I attempted to cut the piece out it breaks. The way I ended up resolving it was to glue the two pieces back together again only this time I took a garment pin, stuck it into the stem and cut the pin flush,it worked. So this is my progress thus far.
-
-
MikeB4 got a reaction from russ in Phantom by MikeB4 - Model Shipways - scale 1:96
Started coppering the hull today. It's a very time consuming task. I've got about seven and a half hours into it today that includes cutting the copper.I haven't cut all the copper yet. I'll put the plates that I've cut so far on the hull and then finish the rest of them up later.I'm moving along slowly but surely or not so sure but definitely slow,The key is keep moving.
-
MikeB4 reacted to dragzz in Phantom by MikeB4 - Model Shipways - scale 1:96
so far mike it look really good just take your time no need to rush the best thing is to have fun building it keep up the great work
-
MikeB4 reacted to gulfmedic1 in Phantom by MikeB4 - Model Shipways - scale 1:96
thanks Mike
build looks great
Our Emblem ®
