thibaultron Posted November 30, 2015 Share #1 Posted November 30, 2015 (edited) I recently drew up a hand powered dredge winch (about 3' X 3' X 2' in full scale), in a 2D CAD program, then went to a 3D model in SketchUp, then to an acceptable STL file to be printed by Shapeways. Would anyone be interested in a thread on the process, and some of the pitfalls along the way? The winch pushes the limits of their tech, when translated to both 1/32nd and 1/64th scale printed models. The winch is for my Carrie Price Skipjack model, in another build thread, but I thought that this subject would be more suitable for a wider audience. Edited November 30, 2015 by thibaultron RichardG 1 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial Link to comment Share on other sites More sharing options...
hexnut Posted December 30, 2015 Share #2 Posted December 30, 2015 If you are running into problems with the step rez on STL, try going to a service bureau that does objet parts. (16 to 30 micron, depending on settings) Spendy for larger parts, but not bad for fiddly bits. mtaylor 1 Quote Regards, Bob Marvin Muscongus bay Lobster Smack -Midwest- 1:24- (1st wooden build) Gertrude L. Thebaud Mini-Mamoli 1/200 kitbash Link to comment Share on other sites More sharing options...
Mahuna Posted December 31, 2015 Share #3 Posted December 31, 2015 Hi Ron: I would be very interested in the thread. Quote Frank Completed: Skipjack Kathryn; Dunbrody Sectional Model; Paragon (modified Mayflower) Scratch Build; Planning a Sectional Model of Dunbrody NRG Member Link to comment Share on other sites More sharing options...
JPZ66 Posted December 31, 2015 Share #4 Posted December 31, 2015 Yes ! Quote Joe Zappa Member, Nautical Research Guild & Puget Sound Ship Modelers Link to comment Share on other sites More sharing options...
thibaultron Posted January 1, 2016 Author Share #5 Posted January 1, 2016 Ok, I'll start writing it. I have to go back through all the steps. Canute, Mahuna, avsjerome2003 and 1 other 4 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial Link to comment Share on other sites More sharing options...
thibaultron Posted January 2, 2016 Author Share #6 Posted January 2, 2016 I started the log, it is called: "Going From A 2D Drawing To A 3D Printed Part Tutorial" mtaylor and avsjerome2003 2 Quote Ron Thibault Shipjack Carrie Price from Pyro kit, with upgraded detailing and history. Going From A 2D Drawing To A 3D Printed Part Tutorial Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.