Larry Drake Posted December 10, 2017 Share #1 Posted December 10, 2017 Started back in April. After cutting the Rabbet and tapering to the bearding line I used magnets and a square to align the bulkheads as I glued them to the keel. zappto, AntonyUK, Tim Curtis and 4 others 7 Quote Link to comment Share on other sites More sharing options...
AntonyUK Posted December 10, 2017 Share #2 Posted December 10, 2017 Hi Larry. Looking good. Take your time with the planning. Welcome to MSW . Regards Antony. Quote Link to comment Share on other sites More sharing options...
Larry Drake Posted December 12, 2017 Author Share #3 Posted December 12, 2017 I did all the hull planking the “hard way” spilling and cutting each piece to width. I got much better and quicker at it as I went along. It is far from perfect, but I learned a great deal. Quote Link to comment Share on other sites More sharing options...
Larry Drake Posted December 12, 2017 Author Share #4 Posted December 12, 2017 Tigersteve and Tom E 2 Quote Link to comment Share on other sites More sharing options...
Larry Drake Posted January 23, 2018 Author Share #5 Posted January 23, 2018 (edited) Cabins and rudder now complete except for paint touch up. Starting on the bowsprit. Addin pictures Edited January 24, 2018 by Larry Drake Pictures didn’t upload GrandpaPhil 1 Quote Link to comment Share on other sites More sharing options...
kier Posted March 12, 2018 Share #6 Posted March 12, 2018 Hi Larry Blimey your quick at your work . With regard to your spiling did your kit come with wide planks of the same wood as other planks, or made by yourself separately.? Great build going by the way. . kier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.