Canute Posted January 21, 2019 #1 Posted January 21, 2019 A question about the hull planking of harbor barges. They are basically rectangular, slab sided vessels with some sloping of the bow (?) and stern areas from the deck to the waterline and down to a keel. Would the planking across the slanting bow/stern areas overlap the boards of the sides or would they be interleaved? The 2" x 6" scale boards (planking) are glued onto a plywood former. I ask as I have an old Sheepscot Scale Products kit of a pile driver on a barge. Pictures are too small or grainy, even with extra light and using my Optivisor, to tell what the configuration is. Just gathering info for a future build. mtaylor and CaptainSteve 2 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
kurtvd19 Posted January 21, 2019 #2 Posted January 21, 2019 In my experience I have never seen any thing other than the planks overlapping the side planks. Many times there are reinforcing boards at the edges - sometimes on both surfaces. Hope this helped. Kurt John Allen and mtaylor 2 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
Baker Posted January 21, 2019 #3 Posted January 21, 2019 Maybe this is interesting for you. Found it on a pdf (the construction sequence of the princess channel wreck) mtaylor and CaptainSteve 2 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum
Canute Posted January 22, 2019 Author #4 Posted January 22, 2019 Kurt and Patrick, thank you. I planned to have the bow planks overlap the side planks. Your info validates my plan. The kit is more into the pile driver appearance versus a built up hull. mtaylor and Baker 2 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild
Deperdussin1910 Posted January 22, 2019 #5 Posted January 22, 2019 I like your project! I have a stalled model of a pile driver on a barge. mtaylor and Canute 2 Quote "So we beat on, boats against the current, borne back ceaselessly into the past."
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.