Jump to content

HMS Victory by Hadesmr - Corel


Recommended Posts

Hi there,

 

Welcome to my building log. Resumed the building this year and wanted to share some of learnings. More pictures than words:) This is my first build and i have obtained plenty of useful information from this forum. 

 

1. Align frames straight and sand them properly and smoothly which will make much easier for planking

2. Use the first layer of planking as practice. Measure the gap and do some math. In short, the middle is much wider than the front and end. There are several videos in YouTube that i found helpful for planking. i would suggest to finish one plank in the center and start from the bottom

3. Mark the position of the gunport. Cut the gunport after the first layer of planking is completed (this is different from the manual)

4. Spend more time on the second layer of planking and try to avoid small gaps between planks. if you do have gaps you can use wood fill or scratch wood to fill it in

5. Buy different grades of sand papers, sand blocks, pins, clamps, super glue gel (better than liquid), knife blades, stains, etc.

 

It may take a bit longer for the next update.

 

Cheers,

 

F

 

IMG_7708.jpg

IMG_7880.jpg

IMG_7905.jpg

IMG_7908.jpg

IMG_7911.jpg

IMG_7925.jpg

IMG_8023.jpg

IMG_8024.jpg

IMG_8166.jpg

IMG_8171.jpg

IMG_8210.jpg

IMG_8211.jpg

IMG_8306.jpg

IMG_8327.jpg

IMG_8328.jpg

IMG_8541.jpg

IMG_8542.jpg

IMG_8544.jpg

IMG_9066.jpg

IMG_9067.jpg

IMG_9068.jpg

IMG_9071.jpg

IMG_9319.jpg

IMG_9320.jpg

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...