hadesmr Posted September 23, 2020 #1 Posted September 23, 2020 Hi there, Welcome to my building log. Resumed the building this year and wanted to share some of learnings. More pictures than words:) This is my first build and i have obtained plenty of useful information from this forum. 1. Align frames straight and sand them properly and smoothly which will make much easier for planking 2. Use the first layer of planking as practice. Measure the gap and do some math. In short, the middle is much wider than the front and end. There are several videos in YouTube that i found helpful for planking. i would suggest to finish one plank in the center and start from the bottom 3. Mark the position of the gunport. Cut the gunport after the first layer of planking is completed (this is different from the manual) 4. Spend more time on the second layer of planking and try to avoid small gaps between planks. if you do have gaps you can use wood fill or scratch wood to fill it in 5. Buy different grades of sand papers, sand blocks, pins, clamps, super glue gel (better than liquid), knife blades, stains, etc. It may take a bit longer for the next update. Cheers, F GrandpaPhil and BLACK VIKING 2 Quote
Eugenio Treviño Posted September 23, 2020 #2 Posted September 23, 2020 Wow ! Your deck planking is awsome !!! I am also building the Corel HMS Victory. I will post my build log very soon. Lets enjoy the journey !!! Quote
hadesmr Posted September 23, 2020 Author #3 Posted September 23, 2020 6 hours ago, Eugenio Treviño said: Wow ! Your deck planking is awsome !!! I am also building the Corel HMS Victory. I will post my build log very soon. Lets enjoy the journey !!! waiting for your post! Quote
Eugenio Treviño Posted September 26, 2020 #4 Posted September 26, 2020 On 9/23/2020 at 8:11 AM, hadesmr said: waiting for your post! Posted today ! Thanks. Quote
clearway Posted September 26, 2020 #5 Posted September 26, 2020 pssst victory should be in the earlier dated post, as she was around 40 years old at time of Trafalgar😁 Quote
Eugenio Treviño Posted October 24, 2020 #6 Posted October 24, 2020 Hi Hadesmr! Do you have more pics to share? How is the build going? Best regards! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.