msberkman Posted December 27, 2014 Author #91 Posted December 27, 2014 after varnishing the bulkhead... Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted December 27, 2014 Author #92 Posted December 27, 2014 I have reshaped the head rails for the exact fit... Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted December 27, 2014 Author #93 Posted December 27, 2014 and I cut a piece of wood with a tringle end for the intersection of head rails and they sit perfect with it. Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted December 29, 2014 Author #94 Posted December 29, 2014 after lining and sanding the head rails... GuntherMT and marktiedens 2 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 2, 2015 Author #95 Posted January 2, 2015 For a few days I have been busy with lining the deck and varnishing. As you can see I attached the gratings as well; but I skiped the third one. This grating is seemed to me as the perfect one for a passage to the lower floor with a ladder. So now I am working on it. I will share the photos of this grating as soon as it finish. GuntherMT and Salty Sea Dog 2 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 3, 2015 Author #96 Posted January 3, 2015 And here is the third grating... First I have built some inner reinforcements for the base. Then I attached them to the both sides of the hole. I have built the floor on the tab of the side mouldings with mahogany sticks. And finally I fixed the ladder and grating... GuntherMT and GTM 2 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
Artisan083 Posted January 3, 2015 #97 Posted January 3, 2015 Hi, I am building the same kit and will be following your posts.I have a question, in my instruction book it looks like the wood used to cover the bulwarks and the hull are different, but in your photos it looks like you used the same. My instructions just say to cover the hull starting at the bottom of the bullwarks and working down to keel with #29 and never refer to covering the bullwarks again. Any help would be greatly appreciated. Thanks, Doug Quote
robored Posted January 3, 2015 #98 Posted January 3, 2015 Hi I have been building this ship for a good while now and I have finally finished the base and need to move onto the rigging however I do not have any instructions for this section and I am seriously struggling to complete it, I am not sure if I am possibly lacking a set of instructions as all it says for me to do is complete the rigging and no further input. If anyone could help with where I could find instructions for this section it would be greatly appreciated! Quote
msberkman Posted January 4, 2015 Author #99 Posted January 4, 2015 Hi, I am building the same kit and will be following your posts.I have a question, in my instruction book it looks like the wood used to cover the bulwarks and the hull are different, but in your photos it looks like you used the same. My instructions just say to cover the hull starting at the bottom of the bullwarks and working down to keel with #29 and never refer to covering the bullwarks again. Any help would be greatly appreciated. Thanks, Doug I will check it and return to you Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 4, 2015 Author #100 Posted January 4, 2015 Hi, I am building the same kit and will be following your posts.I have a question, in my instruction book it looks like the wood used to cover the bulwarks and the hull are different, but in your photos it looks like you used the same. My instructions just say to cover the hull starting at the bottom of the bullwarks and working down to keel with #29 and never refer to covering the bullwarks again. Any help would be greatly appreciated. Thanks, Doug Yes Artisan083 you are right. In the instruction book the wood seems different. But if you look at page 16 or page 18 you will notice that they are the same mahogany no29. I used no29 for both the bulwarks and the hull. The choice is yours but if you use the thinner mahogany in the bulwarks there will be a thickness difference between the bulwarks and the hull. Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 4, 2015 Author #101 Posted January 4, 2015 (edited) Today was my last holiday day so I work hard and do lots of stuff... Now all I need is to build two more wooden doors Edited January 4, 2015 by msberkman Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 4, 2015 Author #102 Posted January 4, 2015 Salty Sea Dog 1 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 4, 2015 Author #103 Posted January 4, 2015 (edited) wooden door; step I Edited January 5, 2015 by msberkman Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 4, 2015 Author #104 Posted January 4, 2015 step II Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 4, 2015 Author #105 Posted January 4, 2015 step III glue them on a paper simple... Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 5, 2015 Author #106 Posted January 5, 2015 step IV Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 5, 2015 Author #107 Posted January 5, 2015 step V cut the surrounding paper and sand the back... Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 5, 2015 Author #108 Posted January 5, 2015 step VI It's done DesertWolf and GuntherMT 2 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 5, 2015 Author #109 Posted January 5, 2015 (edited) I will attach the doors tomorrow... and I'll take photos and share when it's done... Edited January 5, 2015 by msberkman Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 5, 2015 Author #110 Posted January 5, 2015 DesertWolf and Salty Sea Dog 2 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 7, 2015 Author #111 Posted January 7, 2015 I attached the front falconets in place... Salty Sea Dog 1 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
mtdoramike Posted January 7, 2015 #112 Posted January 7, 2015 (edited) Absolutely beautiful work. I built the original San Francisco from Latina, back when they supplied wood veneer strips for the hull, which was applied to a cheaper white wood planking as a second layer. If you don't mind a suggestion, In the future, sand the wood smooth first after you glue it down and once sanded, come back and nail in the nails. It will give a much nicer finish, especially since the Frisco uses the nail heads as adornment. Mike Edited January 7, 2015 by mtdoramike msberkman 1 Quote
msberkman Posted January 8, 2015 Author #113 Posted January 8, 2015 Absolutely beautiful work. I built the original San Francisco from Latina, back when they supplied wood veneer strips for the hull, which was applied to a cheaper white wood planking as a second layer. If you don't mind a suggestion, In the future, sand the wood smooth first after you glue it down and once sanded, come back and nail in the nails. It will give a much nicer finish, especially since the Frisco uses the nail heads as adornment. Mike Thanks for the suggestion.Yes Mike, you are right. I didn't get satisfied with the results of the nail heads either .I though to pull all of them back and replace them with the new ones. I can do these later. Now I am thinking a new method for the nails with less effort. Thanks again, I will wait for your other advices... Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 10, 2015 Author #114 Posted January 10, 2015 (edited) I postponed it till today... but I have to do... I started to built the bowsprit deck as left and right side separately. Then I will fix them together. Edited January 10, 2015 by msberkman Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 11, 2015 Author #115 Posted January 11, 2015 I fixed the bowsprit deck; it fit perfectly to its place... now the right one... GuntherMT, Salty Sea Dog and GTM 3 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
Salty Sea Dog Posted January 12, 2015 #116 Posted January 12, 2015 Your ship is looking really nice! Your skill level has improved at every step too - way to go! The latest pictures are amazing. msberkman 1 Quote -Buck Current build: AL Morgan's Whaleboat (1st build) Kits in the ships locker: I cannot confirm nor deny that there may be a few kits in there...
msberkman Posted January 13, 2015 Author #117 Posted January 13, 2015 Your ship is looking really nice! Your skill level has improved at every step too - way to go! The latest pictures are amazing. thanks buck... nowadays I am busy with that galleon whenever I have free time... Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 17, 2015 Author #118 Posted January 17, 2015 Building the bowsprit deck is a hard and boring step... I gave a break for the right part and started to do something else... GuntherMT and Salty Sea Dog 2 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 17, 2015 Author #119 Posted January 17, 2015 As you can see in the photos first I draw the spaces between the holes. I drilled small ones and then enlarged them about 1.5 mm dia. Finally I rounded the edges and gave the last shape. Salty Sea Dog 1 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
msberkman Posted January 17, 2015 Author #120 Posted January 17, 2015 (edited) Edited January 17, 2015 by msberkman Salty Sea Dog 1 Quote Currently buildingSan Francisco II by Artesania Latina My first wooden model ship Next building San Francisco II Section by Artesania Latina Wish List US Constellation by Artesania Latina
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.