Jump to content

Confederacy Figurehead painting


Recommended Posts

I am starting the Model Expo Confederacy kit and am struggling with painting the figurehead - picture below  (and other Britannia metal decorations).

 

The instructions say these decorations should be painted to look like wood.  I also understand that early on (2009-2010) there were resin versions of these decorations but these are no longer available. So I am stuck with the Britannia metal versions.

 

I have never had much luck painting Britannia metal parts. The paint (and I have tried oil and water based paints) does not seem to want to adhere to the edges of the item.

 

Does anyone have experience painting items like this and have a "tips" that I should follow?

IMG_0246.jpeg

Thanks,

 

Gary

 

Current Builds -  HMS Sphinx 1775

 

Prior Builds:  HMS Winchelsea

                       USF Confederacy

                     

 

 

Link to comment
Share on other sites

I paint wargaming figures as well and "The Army Painter" primer is excellent although it doesn't shrink, so it's very easy to obscure detail if you are a bit heavy on the trigger.

 

I highly recommend Reaper Brush On Primer if you plan on brushing.  It creates more of a powder coating so it doesn't flake off in sheets if there's no tooth to the surface (never had metal flake primer, but have had smooth resin shed primer).  

Vallejo Polyurethane primer is awesome if you airbrush as it shrinks as it dries, so it's very difficult to spray too thick and obscure detail and it creates a very strong base if you let it cure for a day. 

 

All that said, if you have some Krylon primer sitting around, you can hit it with a couple light coats of that.  Metal minis are very forgiving with the primer as they are very easy to strip down to base metal.

 

I also give my metal (and resin) minis a good soak and brushing with Simple Green before priming to remove any residue.

 

 

 

 

CurrentHMS Winchelsea 

 

FinishedPhantom New York Pilot Boat

Link to comment
Share on other sites

  • 2 years later...
On 10/7/2020 at 10:52 AM, cdrusn89 said:

I am starting the Model Expo Confederacy kit and am struggling with painting the figurehead - picture below  (and other Britannia metal decorations).

 

The instructions say these decorations should be painted to look like wood.  I also understand that early on (2009-2010) there were resin versions of these decorations but these are no longer available. So I am stuck with the Britannia metal versions.

 

I have never had much luck painting Britannia metal parts. The paint (and I have tried oil and water based paints) does not seem to want to adhere to the edges of the item.

 

Does anyone have experience painting items like this and have a "tips" that I should follow?

IMG_0246.jpeg

Mixing your paints with powder sugar will increase the adhesion to smooth surfaces like glass or metal. Try it!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...