Jump to content

San John the Baptist by cristikc - FINISHED - Deagostini - wood scale 1:50


Recommended Posts

In january 2011 Deagostini started to sell a magazine: Great Ships, and in 100 magazines

you could build a Galleon from XVII century, 24 guns, 78 x 66 cm and that is open in one side

I also started to buy and build this ship, even i had already Something else in progress.

I see that many of us like to work to 2 or 3 pieces at a time, but that are in diferent stages

This is the start

The firs number, some parts as they come, and number 3 close

post-425-0-94612900-1361098766_thumb.jpg

post-425-0-26221600-1361098838_thumb.jpg

post-425-0-57731900-1361098849_thumb.jpg

Link to comment
Share on other sites

Step by step, and week by week (because the magazine is one a week) i had to work, sometimes i had to wait 3-4 weeks,

and this is why i work to more than one ship.

This is done when i don't have to work hard to my job, or play with my nice

 

At the end, succed to make some decks.

Link to comment
Share on other sites

Step by step, and week by week (because the magazine is one a week) i had to work, sometimes i had to wait 3-4 weeks,

and this is why i work to more than one ship.

This is done when i don't have to work hard to my job, or play with my very nice Nice.

She is now 2 years and 5 month

 

At the end, succed to make some decks.

post-425-0-45762500-1361099824_thumb.jpg

post-425-0-76635800-1361099830_thumb.jpg

post-425-0-45081500-1361099837_thumb.jpg

post-425-0-00697700-1361099850_thumb.jpg

post-425-0-49874500-1361099857_thumb.jpg

post-425-0-40844800-1361099865_thumb.jpg

Link to comment
Share on other sites

From november 2011 i moved my workspace inside, in my son room,  afther he left for his house.

It is better to work inside, instead of work on a closed balcony, in automn or winter.

 

Start of the first plank:

post-425-0-06121700-1361661536_thumb.jpg

 

It arrived the 58 number of the magazine, but i was far behind with my work, i had to work a lot to my job

 

post-425-0-09279800-1361661597_thumb.jpg

but try to move with my ship, when i had time

 

post-425-0-97283500-1361661482_thumb.jpg

post-425-0-30076700-1361661495_thumb.jpg

post-425-0-80009400-1361661553_thumb.jpg

post-425-0-46472600-1361661565_thumb.jpg

post-425-0-28319600-1361661713_thumb.jpg

post-425-0-29117800-1361661731_thumb.jpg

post-425-0-09128700-1361661751_thumb.jpg

Link to comment
Share on other sites

I have to make a small "lathe" in such a way i can do the masts very well

I make a small tool


post-425-0-94206900-1361752809.jpg

And i tried my old idea to make a lathe, where to use this tool

post-425-0-36930800-1361752901.jpg post-425-0-23152600-1361752922.jpg

 

But till that moment, i continue with this cross section

On the other cross section - The Santisima Trinidad i have also to work to the masts,

and this is why i have to stay, for a while

 

This is how i continue

post-425-0-01294000-1361753057.jpg

post-425-0-98473300-1361753081.jpg

post-425-0-40779000-1361753096.jpg

post-425-0-92056500-1361753124.jpg

post-425-0-43525400-1361753143.jpg

post-425-0-90135300-1361753178.jpg

post-425-0-23317000-1361753200.jpg

Link to comment
Share on other sites

  • 2 weeks later...

My work space this days

 

attachicon.gifIMG_6877.JPG

The first plank near the end

attachicon.gifIMG_6878.JPG

attachicon.gifIMG_6879.JPG

Strat the sanding

attachicon.gifIMG_6882.JPG

attachicon.gifIMG_6883.JPGattachicon.gifIMG_6884.JPG

Hej Cristikc,

 

 

I like your creativity of reusing data, maybe you can suggest this to MSW and it might give their old MSW-1 Backup HD a new task in life  :)

Edited by GTM
Link to comment
Share on other sites

Theo, i like your humor

 but i don't want to joke with the guys from MSW, they realy wprked very hard for years,

an maybe sometime, someone can recover the data from this disks

I know that are companies that can do this, but the price is not so small, and it takes some times

I know this because this is my job, computer eng. and i had to do something like this to some very

important HDD that had problems.

For other HDD i like to make tests, and now i'm working to some ideas to reuse the Floppy drive

All the best Cristi

Link to comment
Share on other sites

Contiue to the interior plank, (i can say the third) and try to see if i can use some other type of guns, that i have already from Amati

Actual work

post-425-0-66304000-1362914282.jpg

Gun carriage

post-425-0-12871900-1362914380.jpg

post-425-0-75112100-1362914439.jpg

The guns from Amati to compare with the guns received from Deagostini (any ideas ??)

post-425-0-51178000-1362914472.jpg

post-425-0-37467000-1362914551.jpg

 

Close look of the third plank

post-425-0-48062400-1362914594.jpg post-425-0-45806700-1362914614.jpg

post-425-0-74453300-1362914637.jpg post-425-0-96044400-1362914649.jpg

Link to comment
Share on other sites

  • 4 weeks later...

Had some time to work, and i made some parts to the cross-section

The Sheet bits and the Capstan

post-425-0-14943200-1365053217_thumb.jpg

post-425-0-25894400-1365053365_thumb.jpg

post-425-0-70741900-1365053391_thumb.jpg

post-425-0-75307400-1365053430_thumb.jpg

The main Mast

post-425-0-04916000-1365053462_thumb.jpg

Test to see the main mast in position

post-425-0-52755900-1365053508_thumb.jpg

The deadeyes in position

post-425-0-86945200-1365053593_thumb.jpg

post-425-0-00873800-1365053617_thumb.jpg

Bought some new wood colors (stain) and tested to see how they look

post-425-0-02249200-1365053669_thumb.jpg

 

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...