Order of Mast Assembly

[mrcc]

I have a couple of kit builds under my belt, but not sure how to do masts that have multiple elements to them. I scoured this specific section of MSW without a clear understanding.

 

The question is glue the lower portions of the masts FIRST, securing them in their respective mast holes in the deck and then build the top mast, and then the top gallant mast subsequently (adding all the blocks and fittings as you go up at each section of the mast), making sure all are in proper alignment as they build up or whether to build the entire masts off the deck and then place them? 

 

Not sure on my Mamoli Friesland what is best or ideal given the very limited instructions on this matter?

[Y.T.]

Do not secure mast in the corresponding hole in the hull till you are totally satisfied with complete mast with all sections assembled. You can pull the mast in and out the hole whenever you please and fill necessary. When you are satisfied - secure the mast in the hole.

[druxey]

If you are rigging, the masts will stay put without glue. Hint: they didn't glue the masts in at full size either!

[mrcc]

Thank-you for your input!

 

I appreciate it...