bora Posted December 10, 2014 #1 Posted December 10, 2014 http://modelmakinist.blogspot.com.tr/ for details... Belco, WackoWolf, Paryzek and 10 others 13 Quote
Yambo Posted December 11, 2014 #2 Posted December 11, 2014 That's excellent Bora, thanks for sharing! Teşekkür ederim! Canute 1 Quote If I'd known I was going to live this long, I'd have taken better care of myself.
bora Posted December 12, 2014 Author #3 Posted December 12, 2014 That's excellent Bora, thanks for sharing! Teşekkür ederim! Thank you Yambo Türkiye' de nerdensiniz ? Quote
Murphys77 Posted December 12, 2014 #4 Posted December 12, 2014 Very clever attachments bora, thanks again for sharing! M. bora 1 Quote
Yambo Posted December 13, 2014 #5 Posted December 13, 2014 Thank you Yambo Türkiye' de nerdensiniz ? I live in Turunç, about 10 kms south of Marmaris, Bora. Quote If I'd known I was going to live this long, I'd have taken better care of myself.
oprion Posted February 27, 2016 #6 Posted February 27, 2016 I see you've removed the blade cover. I've been trying to do the same, but have difficulty lifting the work table. Unscrewed the four screws that hold it to the base, removed the blade, but there seems to be something holding the table on left side. WackoWolf 1 Quote
davyboy Posted February 27, 2016 #7 Posted February 27, 2016 Oprion, It's easy to remove. You can carefully spring the attachment apart with a screwdriver to allow you to move the pivot pin far enough to remove the blade cover from the splitter. It's only plastic and will bend easily without breaking. No need to dismantle the saw table. I did this on mine with no problem. Dave mtaylor, WackoWolf and Canute 3 Quote
WackoWolf Posted February 27, 2016 #8 Posted February 27, 2016 I did the same as Dave, didn't break anything. Canute and mtaylor 2 Quote Wacko Joe Go MSW :)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.