Jump to content

TMAN

Members
  • Content count

    10
  • Joined

  • Last visited

About TMAN

  • Birthday 06/15/1950

Profile Information

  • Gender
    Male
  • Location
    Freeport, NY
  1. i think this is probably one of the best exchanges of ideas i have read on this site. Each modeler has expressed their personal views & experiences in this craft that are truly enlightening and inspiring. I've been modeling since the early 1960's as a teen (model cars, some of which I still have and display) but in the middle seventies, on a trip to the Smithsonian, in Washington D.C., I saw a huge display of model wooden ships for the first time. I was mesmerized; I'd never seen anything like it. Right then & there I knew that some day, I had to build one. Then in the mid 1980's, I took my girlfriend (now my wife) to the NY South Street Seaport Museum. Again, model wooden Ships. I told her that one day I wanted to build a model ship. For my 35th birthday, she gave me Model Shipways PHANTOM. I didn't build it until 1995, why... I was overwhelmed! It looked so complicated. Then, one night, I took the hull & plans out of the box and studied everything. I looked at it as a challenge and figured, if I could plastic model cars and make my own parts, why couldn't I build the PHANTOM? I visited the hobby shop, found and later subscribed to SHIPS IN SCALE Magazine & learned about books, the NRG and discovered the LONG ISLAND SHIP MODEL SOCIETY. I joint the cub and learned from all sorts of fellow modelers about tools and this "trade." I realized then, with their help , criticism, advice & encouragement, that I could realized my dream...that I could build model ships like those in the Smithsonian. It became a passion; one of the most rewarding accomplishments so many folks walk away from out of frustration. This craft, in my view, takes, research, encouragement, practice, loads of time but most of all, perseverance; so to you newcomers...NEVER GIVE UP...YOU CAN DO IT. TMAN Current Build: Model Shipways, EAGLE Completed Models: Model Shipways PHANTOM Boucher Models, Henry Hudson's HALF MOON GERTRUDE L. THEBAUD Note: All solid hull models
  2. Thanks, great advice...I'll wait at least a week. TMAN
  3. Hey all, I'm currently using an old jar of Floquil Buwarks White on my current build of Model Shipways, Topsail Schooner "Eagle." I need to apply multiple coats to any parts that require painting, particularly the metal windlass. I cleaned all the "tarnish & age" off the windless with a fine brass brush & 0000 steel wool; came out real nice. Soaked it in isopropyl alcohol for a quick minute, sprayed the next day with Krylon grey metal primer. Came out real sweet! But...the floquil white isn't adequately covering the windless knees, cheeks & bits. Do I have to re-prime the part or can i paint over the areas with an acrylic paint? Thanks, TMAN
  4. Ahoy Vossy, I'm currently building a 1/8 scale of GERTRUDE THEBAUD (1929). I've already prepared about 20 barrels of different sizes for placement on the deck when the rigging is complete. Reviewing several publications about 1920's fishing schooners, photos of real boats showed numerous bucket & barrels to be filled with the "catch" on the decks; so many, in fact, that it seemed as if the crew had no place to move around freely. these details, in my opinion make the model "real!" TMAN
  5. gertrude thebaud

  6. A good friend and fellow model builder built a model of Model Shipways "EAGLE." In the process, he dropped a paint brush on the deck. The bristles were full of red paint. Strangely enough, though the spot left on the deck was rather small, instead of trying to clean it up, he made a figure of a deckhand carrying a paint bucket of red paint and a brush. The brush was dropped, by the figure, on the deck. It too was full of red paint; guess where the deckhand's brush was dropped...right where my friend foiled the deck when he dropped his brush. It was one of the most ingenious repairs I ever saw on a model! And it looked planned. Fret not my friend.......all mistakes are repairable.........
  7. Hi, I'm not new to ship modeling: started in 1995 but life & work got too busy to make models. Retired now & getting back on board. It's amazing how much I missed the challenge! I'm on my third project, GERTRUDE L. THEBAUD, which I started in 2003 is back in progress. My first was Model Shipways, PHANTOM then the HALF MOON, an old kit I found in an old model shop in 1997. It was 90% scratch built. The only thing I kept was the solid hull....my best work yet! Glad to be back on board! Love reading what members are building......... TMAN
  8. TMAN

    Top Mast Shrouds

    Thanks again Frankie, You are correct; they have to be topmast shrouds. They run from the tops of the cross trees to a collar atop the topmasts. I guess i get mixed up between crosstrees & trestletrees. I always believed they were the same? They do run P & S and have nothing to do with spars. I will use black shroud lines. Thanks much; you've cleared up my problem.
  9. TMAN

    Top Mast Shrouds

    Thanks NJ Frankie, In looking at the plans, the lines ("lifts") are referred to as topping lifts. However, they are fixed to eyebolts on the spreaders (trestletrees) and are served at that point. They also are fixed to eyebolts at the mastheads and have no other function other than supporting the topmasts like shrouds. They're definitely not running rigging, seized to deadeyes and have no other apparent function beyond acting as shrouds. I don't want to tar them unless it's proper?!
  10. I'm currently building a 1958 kit by Marine Model Co., Inc. of the GERTRUDE L. THEBAUD fishing schooner ca. 1929. It's a solid hull model. I'm not using any of the kit parts except the hull; I'm scratch building almost everything. The plans are crude and the kit has no instruction manual. Are the topping lifts tarred? I can't find the answer anywhere; not even in Chapelle's "American Fishing Schooners 1825 - 1935." I know that standing rigging is...any clues?

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to provide support to our members in their efforts to raise the quality of their model shipcraft.

The Nautical Research Guild puts on ship modeling seminars, yearly conferences, and juried competitions. We publish books on ship modeling techniques as well as our world-renowned quarterly magazine, The Nautical Research Journal, whose pages are full of articles by master ship modelers who show you how they build those exquisite details on their models, and by maritime historians who show you what details to build.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×