Jump to content
MSW Spring Donation Drive

threebs

Members
 View Profile  See their activity

  • Posts

    154

  • Joined

  • Last visited

 Content Type 

Everything posted by threebs

  1. threebs
    Welcome to this site. Great resources here. I am from Fargo, North Dakota originally moved to Vail, AZ when I retired in 2005. I am familiar with the D L area and the Baudette area. I fished both areas frequently.
  2. threebs
    I keep them in my garage. Working on cases for them slowly.
  3. threebs
    The USS Delaware scratch built in 1/72 is 99.9% done. I will need to go over it closely a few more times to touch up paint here and there. Add a few more rope coils to the ship's boats tie off pins. Touch up the coppering and smooth it down where is has curled up from handling.
  4. threebs
    One of the ship's sunk was the Merrimack. Except for a set of loft plans of her class ship the Wabash, I can not find much about her. How closely would the USS Kearsarge resemble the Merrimack?
  5. threebs
    I am building all of the US warships sunk at Norfolk harbor in 1861. Still have the Germantown, the Merrimack, the Columbia, the Raritan, the Dolphin, and the Plymouth.
  6. threebs
    Been a long time since I posted a build here. I believe I will start up again and see if I can drum up some interest. I have finished 3 of the 11 ship sunk at Norfolk harbor in 1861. The Pennsylvania, The Columbus and the United States.
  7. threebs
    I made an offer to start build logs on the United States and Delaware on this site a few days ago. Seems to be no interest in them, so I will just go back to my other forums and concentrate my efforts there.
  8. threebs
    Hello everyone, I am not sure why I stopped posting to this site, except I remember it was sort of difficult posting photos here, boy, not anymore! I have finished the Columbus now, And I have posted three photos of my United States build and the start of the Delaware 90 guns of 1817 I have the bulkheads cut out for the Germantown, the bulkhead patterns for the Columbia and Raritan ready to transfer to plywood. If anyone is interested I will start build logs for all of them.
  9. threebs
    As much as I appreciate the "likes" i get on my posts they are just not the same a a personal "atta boy" post I can actually read and enjoy. Might as well have a robot on the other end making generic comments about my work, The whole concept of "likeing" simply escapes me.
  10. threebs
    These plastic side hinge pin pieces should be the last bits to glue onto the gun doors. That is 4 each for the 32 double doors and two each for the 34 snigle doors, you do the math, I would be to intimidated if I actually knew how many it was, lol!
  11. threebs
    These plastic side hinge pin pieces should be the last bits to glue onto the gun doors. That is 4 each for the 32 double doors and two each for the 34 sigle doors, you do the math, I would be to intimidated if I actually knew how many it was, lol!
  12. threebs
    I have a little build station on an end table next to my couch where I sit with my leg up. I constructed all of the half doors and the hinge straps from here. I super glued all the straps to all the doors, then soldered the hinge pins to the the ends of the straps. The heat melted most of the straps off ans I had to re glue almost all of them over. I Used a fresh bottle of super glue and they do stay on better than before. The last photo shows the straps with pins soldered on, after the heat melted the glue.
  13. threebs
    I will have more time to work on the ship now, I broke my ankle 3 days ago, lol. Surgery in 2 days. I chased a dog running in traffic to a house about a mile from me, I let him in the gate, he had dug a huge hole under the gate, so I put a couple head sized rocks in the hole, but, it looked like he could still get out, so I went to the front of the house and got a big 100 pound rock and as I was rounding the corner I stumbled on a drip irrigation line. I drop the rock to keep from going face first into the iron rail side fence, and, pow, landed on my ankle. I will still help dogs get home though, life happens, and you deal with, move on.
  14. threebs
    I get more responses on my other build site than I do here, so that one gets more attention. Starting the bulkheads for my USS United States now, just working out how to cut the keel bulkhead. There will be a new site for that build, although it will not get much posting as I will only work on it occasionally until this build is done.
  15. threebs
    Yeah, but, I post to another build site and the photos post much smaller, you click on them to get a larger print. On this site the "blow up" is the same size as the posted photo. Perhaps I need to reduce the pixels on this site, Just a little more work is all, lol.
  16. threebs
    Some rough soldering of upper chains they need some smothing with a dremel tool and then paint. The chains need some straightening as well. Let me know your thoughts?
  17. threebs
    I was looking at the top half of the chain connected to the dead eyes, and I don't think it is square stock like in the photo of the side of the Constitution's hull. I think the blue Print view shows a side on view of another link of chain, a skinny oval like on the Pennsylvania. The way it attaches to the bottom chain link and the Dead eye just does not look like it would work What do you guys think?
  18. threebs
    been working on deadeyes and chain. the bones had to be cut down 3/16 of an inch and resoldered, now I need to file them smooth and paint them. 'I did a simple twist of copper wire around the deadeyes, soldered them and drilled the holes by hand. The loop chain are 1/2" long and also soldered at ends and hand drilled holes. There is one more section of chain, but, it is just square stock. I am going to cut sown stick pins for the "bolts". I am also putting the rudder on and smoothing out the copper tape where it peeld back from handling.
  19. threebs
    spar deck furniture is done
  20. threebs
    Small setback, my ships wheel assembly got knocked to the carpet, and, well, my dachunds think anything I drop is food, so...... one wheel got crunched before I could get it away from the dog, lol dont know how to delete this photo
  21. threebs
    I thought the spar deck furniture would be a snap, forgot about redoing ships wheel from 8 spokes to 10, Five trys to finally get them all roughly the same length and spaced around the outer wheel. I have the binnacle done too. Also the ships bell tower and the hatch behind the stove pipe covered. Working on railing for steps coming off the quarter deck, and the platform and rope ladder fron the wale steps, over the wale cap and down to the deck, which is just a rope ladder. Also the rope railings on the ladders I do not have enough brass posts to "fence" off the Main hatch. Might leave it off like I did on the Pennsylvania.
  22. threebs
    carronades getting rigged
  23. threebs
    Now that I am installing the deck furniture on the spar deck, I have noticed a few things now that I look closer that I did not really notice before. Just forward of the main mast is a section of grating that appear to have 2 bits projecting out of it as they do near the fore mast. As the ladders seem mounted in front of this section of grating am I correct to think that this grating is more or less battened down all the time? And I will need to make a frame work under that section of grating to make it appear as if it is holding that grating in place. At the bow where the stove pipe pierces the spar deck, the covering appears to be something other than the normal wooden grating. Both the small section and the larger one behind it seem to be a metal mess or something fairly fireproof so the heat in the galley stove does not set it afire? That sound right to you guys? All so, the anchor bits where the wales are pierced for the anchor fluke seem to be more in board than on other large US warships such as the Ohio and the Pennsylvania who's bits are part off the hull and appear where I have marked them with a black "x" I am lead to believe this is just a variation between certain ships. The framing or the spar deck openings need to be widened as they are too skinny to mount brass posts to for the ladder railings. I will do this as I breathlessly await your sage answers to these questions.
  24. threebs
    I had all 210 single and double blocks rigged to make carronade tackle out of 4 mm blocks. they were just too big. I started over with 2mm blocks and I will be rigging the carronades in the next day or two, THEN photos will be coming as I put the remaining deck items on and move to the gun port door hinges, another chore I do not like, lol
  25. threebs
    Thumb has healed better than I expected, just need nerves to heal, be some time yet. Been able to work despite all that as you can see in photos

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...