ppddry
-
Posts
42 -
Joined
-
Last visited
Reputation Activity
-
ppddry got a reaction from harvey1847 in HMS Pandora 1779 in 3D
Hi Tim, will the following pictures be of any help?
-
ppddry got a reaction from PeteB in HMS Pandora 1779 in 3D
Hi Experiment,
Yes, it is done from the cross sections in the book, corrected with the scantlings of the frames listed in The Shipbuilder's Repository. I just sent an reply to your PM.
Best regards,
Jingyang
-
ppddry got a reaction from harvey1847 in HMS Pandora 1779 in 3D
Hi Daniel,
Sorry for the VERY late reply . The process is as follows: firstly the 2D drawings of the frames are imported on to different reference plans in Solidworks, then draw the boundary of the hull surface with the help of other imported 2D drawing curves, finally use the boundary surface feature in Solidworks to construct the hull surface guided by the curves. As can be seem from the pictures below. And Yes, a set of 2D drawings can be generated from the 3D model.
Best regards,
Jingyang
-
ppddry got a reaction from mtaylor in HMS Pandora 1779 in 3D
Hi Garward! It is a gorgeous model! If I recall correctly this is one of the models that inspired me into undertaking this project
-
-
ppddry got a reaction from KORTES in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
ppddry got a reaction from albert in HMS Pandora 1779 in 3D
Hi Tim, will the following pictures be of any help?
-
-
-
ppddry got a reaction from Mike Y in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
ppddry got a reaction from Mike Y in HMS Pandora 1779 in 3D
Hi Mark,
Thank you very much to pointing out the inaccuracy! The following picture shows the standard as of now. It seems that I need to modify it further. Also, do you mean the two light blue edges should be rounded near the stem post but remain sharp near their front end?
Best regards,
Jingyang
-
ppddry got a reaction from albert in HMS Pandora 1779 in 3D
Hi Mark,
Thank you very much to pointing out the inaccuracy! The following picture shows the standard as of now. It seems that I need to modify it further. Also, do you mean the two light blue edges should be rounded near the stem post but remain sharp near their front end?
Best regards,
Jingyang
-
ppddry got a reaction from PeteB in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
ppddry got a reaction from PeteB in HMS Pandora 1779 in 3D
Hi Mark,
Thank you very much to pointing out the inaccuracy! The following picture shows the standard as of now. It seems that I need to modify it further. Also, do you mean the two light blue edges should be rounded near the stem post but remain sharp near their front end?
Best regards,
Jingyang
-
ppddry got a reaction from PeteB in HMS Pandora 1779 in 3D
Hi Tim, will the following pictures be of any help?
-
-
ppddry got a reaction from mtaylor in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
-
ppddry reacted to HUC Bernard in HMS Pandora 1779 in 3D
Hello Jinyang
Great work.
When you have finished modeling, it would be great to make a movie like I did almost 10 years ago.
Congratulations.
Bernard -
ppddry reacted to Garward in HMS Pandora 1779 in 3D
Hi, Jingyang!
This HMS "Pandora" in scale 1:48 http://www.shipmodels.com.ua/eng/models/elite/pandora/index.htm model russian master Narim Majgeldinov is constructed. Your 3D model looks perfectly! -
ppddry got a reaction from WackoWolf in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
-
ppddry got a reaction from igorcap in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
-
ppddry got a reaction from dvm27 in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.