-
Posts
225 -
Joined
-
Last visited
Reputation Activity
-
Angarfather got a reaction from Cathead in Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED
Sorry to hear about the health problems, Mark - and good to see you back.
best regards
Hartmut
-
Angarfather got a reaction from Piet in Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED
Sorry to hear about the health problems, Mark - and good to see you back.
best regards
Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Thanks to all for the kind words and the likes!
Next step was modelling the rudder.
Bevor I could install the rudder I had to paint the under water parts of the Utrecht
Next step was to make the rudder blade and the hinges
I havemade the hinges from 0,5mm brass with 2,1mm diameter bras tubes, soldered with silver.
The tiller, made from matall, goes from the rudder shaft under the pavillons bottom to the main deck.
At last the rudder after mounting
Best regards
Hartmut
-
Angarfather got a reaction from mtaylor in Chebece 1750 by Jeronimo - FINISHED
Hello Karl,
You are doing a realy amazing job in modelling your Chebece! I will follow your thread!
Best regards from Hannover
Hartmut
-
Angarfather got a reaction from mtaylor in Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED
Sorry to hear about the health problems, Mark - and good to see you back.
best regards
Hartmut
-
Angarfather got a reaction from JesseLee in Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED
Sorry to hear about the health problems, Mark - and good to see you back.
best regards
Hartmut
-
Angarfather got a reaction from Salty Sea Dog in Licorne 1755 by mtaylor - 3/16" scale - French Frigate - from Hahn plans - Version 2.0 - TERMINATED
Sorry to hear about the health problems, Mark - and good to see you back.
best regards
Hartmut
-
Angarfather got a reaction from cog in Statenjacht Utrecht by Angarfather - 1:36
Thanks to all for the kind words and the likes!
Next step was modelling the rudder.
Bevor I could install the rudder I had to paint the under water parts of the Utrecht
Next step was to make the rudder blade and the hinges
I havemade the hinges from 0,5mm brass with 2,1mm diameter bras tubes, soldered with silver.
The tiller, made from matall, goes from the rudder shaft under the pavillons bottom to the main deck.
At last the rudder after mounting
Best regards
Hartmut
-
Angarfather got a reaction from cog in Chebece 1750 by Jeronimo - FINISHED
Hello Karl,
You are doing a realy amazing job in modelling your Chebece! I will follow your thread!
Best regards from Hannover
Hartmut
-
Angarfather got a reaction from Piet in Statenjacht Utrecht by Angarfather - 1:36
Thanks to all for the kind words and the likes!
Next step was modelling the rudder.
Bevor I could install the rudder I had to paint the under water parts of the Utrecht
Next step was to make the rudder blade and the hinges
I havemade the hinges from 0,5mm brass with 2,1mm diameter bras tubes, soldered with silver.
The tiller, made from matall, goes from the rudder shaft under the pavillons bottom to the main deck.
At last the rudder after mounting
Best regards
Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Hello, mates!
we, my Admiral and me, returned from a 14 days journey on board of the Richard With, a ship of the norwegian HurtigRuten. A very impressive time from Bergen (Nor) to Kirkenes and back to Bergen.
But now its time to continue modelling the Utrecht. The last parts on deck. Some cleats and the skylight of the big cabin. To make this part was an most interesting job. It is eight cornerd.
ANd her is a pic all over the deck
Cheers Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Hello Guys!
Thanks for the kind words to my works!
Here again some pics of further details.
To make the railing around the stairs was a special pleasure, since I have not worked with metal for a long time. It's from 3 and 2mm brass, soldered with silver solder.
On the supports came still a few balls,which comes close to the baroque style.
And here are the other parts which are new on deck. Four cleats, two pin racks and the bearings of the leeboards
Have a nice weekend!
Cheers
Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Many thanks to Nils, Dadodude, Mark and also the "Likes"
I am now modelling all the parts which are still missing on deck.
The hatches of the forecastle.
Caboose chimney
Making the Sky light of the crew mess
In the evening the CEO of the company came along to visit the ship.
His was quite satisfied and invited the Crew to red vine.
Cheers! Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Another step. Utrecht needs a stand now. I am rarely a minimalist. Only for the stands. Therefore I like to use plexi glass for this job.
It s from 6mm Plexi and a 9mm roundbeam, assembled with two M4 screws
My Admirals did say: Beautiful, she floats over the ground.
Best regards Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Many thanks, guys!!!!
Bevor I can start to carve and bring in the figurhead (a lion ) I have to make some little parts to finish the bow.
The reinforcement of the stem to hold the loop for the gammoning ropes and the knee to support the sprit
The reinforcement is from 0,8mm brass. The loop from 2mm brass soldered into the brass sheet.
Besst regards Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Hello Mates!
The gallion painted.
Best regards Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
To model the gallion is a little bit fiddly. The drawings doesn't show the real dimension of the rails and knees. So I started first to make the lower and upper knees.
After this I could find out the dimensions of the upper rail
Next job will be the carving of the filler and the figurhead.
Cheers Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Thanks, guys!
@dadodude This is my favourit monster. Its watching the portsite.
Cheers Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Many thanks to Patrick and the Likes!
After several weeks with carving, I now again have to made some technical parts of the Utrecht.
First the windlass
On board of the Utrecht the catheads and the windlass are one technical system. I have made it from swiss pear, the rolls are from brass
It was no problem to turn the shaft of the windlass from beech wood
Milling in the tooth ring of the backflow barrier
In position
Finished
Best regards Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Many thank to all the Likes
Some pics from the finished decorations of the Windows.
Now I have to carve some figures. I tried at first to carve the two sea animals which will "live" on the reling. They are not so complicated as the galions lion and the others. They are named dolphins, but I think that they are typical baroque seamonsters.
Cheerio Hartmut
-
Angarfather got a reaction from flying_dutchman2 in Statenjacht Utrecht by Angarfather - 1:36
Many thanks, guys!!!
A little update. some decoration rails at the sites of the pavilon.
Cheers! Angarfather
-
Angarfather got a reaction from Captain Poison in Statenjacht Utrecht by Angarfather - 1:36
Thanks to all for the kind words and the likes!
Next step was modelling the rudder.
Bevor I could install the rudder I had to paint the under water parts of the Utrecht
Next step was to make the rudder blade and the hinges
I havemade the hinges from 0,5mm brass with 2,1mm diameter bras tubes, soldered with silver.
The tiller, made from matall, goes from the rudder shaft under the pavillons bottom to the main deck.
At last the rudder after mounting
Best regards
Hartmut
-
Angarfather got a reaction from cog in Statenjacht Utrecht by Angarfather - 1:36
Many thanks to Nils, Dadodude, Mark and also the "Likes"
I am now modelling all the parts which are still missing on deck.
The hatches of the forecastle.
Caboose chimney
Making the Sky light of the crew mess
In the evening the CEO of the company came along to visit the ship.
His was quite satisfied and invited the Crew to red vine.
Cheers! Hartmut
-
Angarfather got a reaction from cog in Statenjacht Utrecht by Angarfather - 1:36
Another step. Utrecht needs a stand now. I am rarely a minimalist. Only for the stands. Therefore I like to use plexi glass for this job.
It s from 6mm Plexi and a 9mm roundbeam, assembled with two M4 screws
My Admirals did say: Beautiful, she floats over the ground.
Best regards Hartmut
-
Angarfather got a reaction from cog in Statenjacht Utrecht by Angarfather - 1:36
Many thanks to Patrick and the Likes!
After several weeks with carving, I now again have to made some technical parts of the Utrecht.
First the windlass
On board of the Utrecht the catheads and the windlass are one technical system. I have made it from swiss pear, the rolls are from brass
It was no problem to turn the shaft of the windlass from beech wood
Milling in the tooth ring of the backflow barrier
In position
Finished
Best regards Hartmut