Brucealanevans
-
Posts
450 -
Joined
-
Last visited
Reputation Activity
-
Brucealanevans got a reaction from Tim Curtis in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
The whaleboats are now done except for the rudders. Today finished the rigging of the steering oar braces, added the steering oar rests, two cleats inside rail aft, and did some touch-up.
I'm not sure if I'll give the boats a coat of white (below the rubbing strips) since I kind of like the weathered and beaten look of the primer coat.
Tomorrow, detailing the rudders and deciding on the rigging of the 2 lines that suspend them in the stored position.
-
Brucealanevans got a reaction from tarbrush in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Slow but sure.
Turns out the limiting factor is deciding how much detail to include in these little whaleboats.
I've finished the interior and painted the interior details and the ceiling boards.
Now on to the thwarts - as I know from my New Bedford Whaleboat build years ago these are more complicated than simple planks.
We'll see how much translates to this scale and my ability to work with itty-bitty parts.
The rail ended up a bit too thick but I can live with that.
-
Brucealanevans got a reaction from pjofc4 in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Big moment.
The whaleboats are finished with the content they will have when mounted - oars, spars/sail wrap, and paddles.
Next is to retrieve the Morgan from her case in the living room and mount the boats, hopefully without snapping a davit for the umpteenth time.
So close to done now I can taste it, but will have to wait as we have a week in Napa coming up.
Thanks to all for the comments and likes on the boats. The effort to have the details match the work on the mother ship was really worth it, and was quite fun once the hull carving was completed.
My advice to all Morgan builders - use work on the whaleboats as a break from the main construction so that only the fun stuff remains at the end.
-
Brucealanevans got a reaction from Cathead in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
There is a heck of a lot of scratch work involved in the Morgan build.
I've learned a lot in the 3+ years I've been working on it.
The best decision was to fabricate the rendering furnace from individual "bricks". There's a PDF around the site somewhere with useful instructions.
Took a while but the appearance is really worth it. Working on oars now - drawing 1/32 square boxwood strips through Modelworks drawplate down to scale width. Works a treat. I can even create the handle on these little tiny dowels by carefully working the end for 1/8 inch into 4-5 smaller yet drawplate holes.
-
Brucealanevans got a reaction from pjofc4 in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Whaleboats are done. I've had to stop myself from adding a few more details that don't really add anything to the visual impact of these, and I'm declaring victory!
I've put the boats aside to begin working on oars, probably paddle sets, and the spars/sail bundles. I haven't put the eyes for hanging on yet, as I want to make certain the lines hang straight down from the davits, so will customize them for each specific boat's place. It looks like there may be a few mm variability.
Final boat photos below (25 cent piece for scale)
-
Brucealanevans got a reaction from tarbrush in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
After about a month of going downstairs to the shipyard, and looking at 4 7 layer wood sandwiches waiting to be hollowed/carved and deciding to do something else, I decided to force myself to get back to work on the whaleboats. I'm sure that the admiral's proclamation that I could not start a new project until they were done had nothing to do with it!
So each day I brought a boat to stage one (inside hollowed out and outside sanded down) for 4 days. Then each day bringing one boat to stage two (fine shaping, installation of rails, keel, bow chocks, and rubbing strips). 8 days and this is where I am right now. About 4-5 hours each day (some waiting for glue to set).
Now I'll put the ribs (visible ends), taper them, and install the first two runs of the ceiling planking on all four boats as stage 3.
-
Brucealanevans got a reaction from schooner in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
I decided to move ahead with one whaleboat, just to figure out how to approach the construction, what tools and wood to use, etc.
I have finished one to the primer stage shown below, but now have decided to get them all to this stage before doing the detailing.
It's a lot of work, and I suspect doing another four will take me some time as I only spend a few hours 4-5 days a week working in the shipyard, and we've been doing a fair amount of traveling.
I did have my first opportunity to fire up my new Byrnes thickness sander to create some 1/64 thickness sheet for these.
-
Brucealanevans got a reaction from schooner in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
On to the whaleboats.
Each is made up of 7 lifts glued together and then carved/sanded to profile.
I glued all seven sets, and set to work on the boats that will be the spares stored upside down on the boat bearer/shelter of the Morgan.
My references suggest that these were primed only, to be painted when needed to replace a lost boat.
Below are the two boats, one with only the fore and aft profile sanded and the other (exterior shaping) complete. About 3 hours work to turn the left hand example into the right hand result.
-
Brucealanevans got a reaction from schooner in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Finished the cutting in stage today.
The Morgan (ship) is done.
I'll put it somewhere safe and begin working on the whaleboats. Since I've been ignoring other projects and interests to push to get to this stage, I'm going to limit myself to mornings in the shipyard till the whaleboats are done and mounted.
Here's the cutting in stage:
-
Brucealanevans got a reaction from IgorSky in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Running rigging is now done.
New candidate for repetitive mindless job of the month: making dozens of rope coils for the belay point (last picture).
The rest are views of the essentially complete Morgan with coils for the spider bands and mainmast pinrail yet to be placed. I was hoping to be completely done (except the 7 whaleboats) before I leave the country for a week, but the coils took longer than expected and I won't have time to do the cutting-in stage and the paint touch ups here and there that it needs.
Only a day or two work remaining.
-
Brucealanevans got a reaction from schooner in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
I haven't posted progress because the foremast was just duplication of the mainmast yards, and I also took a week or so away to recharge. Having said that, I must be learning something from this process since the foremast went easier (altho the belay points were also more accessible, which helped.
Certainly doing the Morgan for my first truly rigged ship turned out to be a real challenge. Some bits don't bear real close inspection, some lines had to be spiced, etc. etc.
At any rate, the running rigging is now done except for the braces and placing rope coils. I expect that to take me a week or perhaps two. Then the Morgan goes into it's case in the living room while I build the whaleboats. Unless I add the cutting stage first.
-
Brucealanevans got a reaction from hexnut in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Finished hoisting the Main Topgallant yard (sail furled) and all the attendant running rigging except for the braces.
Now I put the ship up and away, and begin working on the foremast yards. Hopefully the experience of the main yards and the trouble spots due to not recognizing things best done before anything is mounted will stand me in good stead, as this will be essentially a repeat of the mainmast yards. I will repeat the same mixture of set and furled sails on the foremast.
For simplicity sake and my sanity, I have not set/rigged for the staysails. Apparently the main staysails were often not set, but I probably should have set the mizzen staysails - will, however, leave well enough alone.
Learning a lot, and rigging my next full ship - likely Grenado - will hopefully benefit from the experience.
-
Brucealanevans got a reaction from hexnut in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
A stressful and disappointing morning in the shipyard ....
All I had to do today was tie off two topsail clew lines and add a couple blocks and the static lift.
Unfortunately, tying off the two lines was very difficult due, again, to access to the belay points. In manipulating a 6" tweezers through a maze of obstacles, I managed to tie them off at the cost of breaking off a couple of lower main yard blocks when putting unintentional pressure on the main lower yard and "plucking" several foremast stays to the extent that they are now slack. Very unsightly.
I repaired the broken ties to the blocks and restrung things, but lost the perfect 90 degree placement of all the yards whose lines are already tensioned and tied off. I still don't know exactly what I'm going to do about the stretched and slack fore-stays, but I think I'm going to have to walk away for a few days. I was hoping to get the last top-gallant yard up before taking a break, but that's not going to happen.
Ups and Downs; lots of "next time I'll do it THAT way", etc.
-
Brucealanevans got a reaction from Mirabell61 in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Whaleboats are done. I've had to stop myself from adding a few more details that don't really add anything to the visual impact of these, and I'm declaring victory!
I've put the boats aside to begin working on oars, probably paddle sets, and the spars/sail bundles. I haven't put the eyes for hanging on yet, as I want to make certain the lines hang straight down from the davits, so will customize them for each specific boat's place. It looks like there may be a few mm variability.
Final boat photos below (25 cent piece for scale)
-
Brucealanevans got a reaction from Cathead in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
The whaleboats are now done except for the rudders. Today finished the rigging of the steering oar braces, added the steering oar rests, two cleats inside rail aft, and did some touch-up.
I'm not sure if I'll give the boats a coat of white (below the rubbing strips) since I kind of like the weathered and beaten look of the primer coat.
Tomorrow, detailing the rudders and deciding on the rigging of the 2 lines that suspend them in the stored position.
-
Brucealanevans got a reaction from Mirabell61 in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
I've finished the interiors of all five of the whaleboats. After completing the detailed thwarts, I added the "metalwork" for the mast support and "hinge". These were cut out of cardstock and painted. Rivets were simulated with pinpricks from the reverse side prior to painting. The hinge pieces on the thwart were wrapped around a small piece of metal wire prior to painting. A long small eyelet was used to simulate the centerboard pull.
Overall I'm quite happy with how these look. The detail work after the thwarts were stained and glued in place took about 6 hours.
Next up are the lion's tongues and the loggerheads. Once I got past the carving of the hulls this became fun again.
-
Brucealanevans got a reaction from tarbrush in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Here's one boat with the finished thwarts in place. I decided to go for stain over paint both to give some sense of weathering and to highlight rather than hide the construction of each thwart. The details just draw the eyes. I find myself grabbing it and just gazing when walking by the shipyard.
Now to bring the other four up to this level, and then add a bit of inside detail hardware to each - pull for the centerboard in the up position, and some approximation of the brass support/hinge for the mast support. That will likely be painted paper with small rod taking the place of the hinge.
These really are little projects in and of themselves, but they are so visible on the finished ship that to shortchange the detail and/or put oars and spars/sail in that are clearly out of scale in thickness would really detract from the model. Since I've spent so long on the ship itself, putting some extra time into these is worthwhile.
Probably 4-5 hours to construct and finish the thwarts for one boat including interval drying time.
-
Brucealanevans got a reaction from Tim Curtis in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Slow but sure.
Turns out the limiting factor is deciding how much detail to include in these little whaleboats.
I've finished the interior and painted the interior details and the ceiling boards.
Now on to the thwarts - as I know from my New Bedford Whaleboat build years ago these are more complicated than simple planks.
We'll see how much translates to this scale and my ability to work with itty-bitty parts.
The rail ended up a bit too thick but I can live with that.
-
Brucealanevans got a reaction from Mirabell61 in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Rib (ends) glued in place on all four boats, and tapered towards the lower end so that the ceiling boards will lay well.
First ceiling board glued in place on all four boats.
I'm going to do these in parallel; it's psychologically easier than doing a lot of work on one and then starting all over again on two, three, and four.
I'm using some boxwood 1/32 x 1/16 strips I have for these ceiling boards, and used boxwood 1/32 x 1/32 for the ribs. I've used up all the small basswood strips that came with the kit as well as additional ones I got some time ago. The boxwood is a pleasure to work with - the ease with which fine chisel work for the tapering can be done is night and day over the basswood.
Next project, whatever it is, will use basswood (or limewood) kit wood only for first planking where a second one will be done. Given the time I spend working on these (3 years plus on the Morgan) the investment in good wood is reasonable. I wish I'd made the skylight on the Morgan from boxwood so I could have had the correct number of rods - the basswood uprights split if I tried to drill the correct number of holes for the rods, so I had to reduce the number.
-
Brucealanevans got a reaction from tarbrush in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Rib (ends) glued in place on all four boats, and tapered towards the lower end so that the ceiling boards will lay well.
First ceiling board glued in place on all four boats.
I'm going to do these in parallel; it's psychologically easier than doing a lot of work on one and then starting all over again on two, three, and four.
I'm using some boxwood 1/32 x 1/16 strips I have for these ceiling boards, and used boxwood 1/32 x 1/32 for the ribs. I've used up all the small basswood strips that came with the kit as well as additional ones I got some time ago. The boxwood is a pleasure to work with - the ease with which fine chisel work for the tapering can be done is night and day over the basswood.
Next project, whatever it is, will use basswood (or limewood) kit wood only for first planking where a second one will be done. Given the time I spend working on these (3 years plus on the Morgan) the investment in good wood is reasonable. I wish I'd made the skylight on the Morgan from boxwood so I could have had the correct number of rods - the basswood uprights split if I tried to drill the correct number of holes for the rods, so I had to reduce the number.
-
Brucealanevans got a reaction from jwvolz in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Slow but sure.
Turns out the limiting factor is deciding how much detail to include in these little whaleboats.
I've finished the interior and painted the interior details and the ceiling boards.
Now on to the thwarts - as I know from my New Bedford Whaleboat build years ago these are more complicated than simple planks.
We'll see how much translates to this scale and my ability to work with itty-bitty parts.
The rail ended up a bit too thick but I can live with that.
-
Brucealanevans got a reaction from Tim Curtis in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Here's one boat with the finished thwarts in place. I decided to go for stain over paint both to give some sense of weathering and to highlight rather than hide the construction of each thwart. The details just draw the eyes. I find myself grabbing it and just gazing when walking by the shipyard.
Now to bring the other four up to this level, and then add a bit of inside detail hardware to each - pull for the centerboard in the up position, and some approximation of the brass support/hinge for the mast support. That will likely be painted paper with small rod taking the place of the hinge.
These really are little projects in and of themselves, but they are so visible on the finished ship that to shortchange the detail and/or put oars and spars/sail in that are clearly out of scale in thickness would really detract from the model. Since I've spent so long on the ship itself, putting some extra time into these is worthwhile.
Probably 4-5 hours to construct and finish the thwarts for one boat including interval drying time.
-
Brucealanevans got a reaction from tarbrush in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
I've finished the interiors of all five of the whaleboats. After completing the detailed thwarts, I added the "metalwork" for the mast support and "hinge". These were cut out of cardstock and painted. Rivets were simulated with pinpricks from the reverse side prior to painting. The hinge pieces on the thwart were wrapped around a small piece of metal wire prior to painting. A long small eyelet was used to simulate the centerboard pull.
Overall I'm quite happy with how these look. The detail work after the thwarts were stained and glued in place took about 6 hours.
Next up are the lion's tongues and the loggerheads. Once I got past the carving of the hulls this became fun again.
-
Brucealanevans got a reaction from jwvolz in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
The whaleboats are now done except for the rudders. Today finished the rigging of the steering oar braces, added the steering oar rests, two cleats inside rail aft, and did some touch-up.
I'm not sure if I'll give the boats a coat of white (below the rubbing strips) since I kind of like the weathered and beaten look of the primer coat.
Tomorrow, detailing the rudders and deciding on the rigging of the 2 lines that suspend them in the stored position.
-
Brucealanevans got a reaction from tarbrush in Charles W Morgan by Brucealanevans - FINISHED - Model Shipways
Whaleboats are done. I've had to stop myself from adding a few more details that don't really add anything to the visual impact of these, and I'm declaring victory!
I've put the boats aside to begin working on oars, probably paddle sets, and the spars/sail bundles. I haven't put the eyes for hanging on yet, as I want to make certain the lines hang straight down from the davits, so will customize them for each specific boat's place. It looks like there may be a few mm variability.
Final boat photos below (25 cent piece for scale)
Our Emblem ®
