Ferrus Manus

On Friday and Saturday i got started on the painting and general hull assembly. First, i ended up using soft-grit sandpaper to rough up the smooth hull for better paint adhesion. For the most part, i was happy with the result. However it took several coats to smooth out the paint job, with mixed results. The hull plastic was white, which ended up highlighting inconsistencies in the paint. (We'll just cover it up with shade, they'll never know) As you can see, i started on the bowsprit assembly: Apologies for the grainy image quality, my phone is 5 years old. The instructions were not clear on how the bowsprit was to be attached to the hull. As the box art shows, the bowsprit extends well into the hull and sits attached to the deck and anchor winch. There was no hole in the front, but instead an indentation. I erroneously thought the bowsprit was to sit in that position in the bow indentation, which took considerable sanding to achieve. I guess this is a fictitious vessel and not a true copy of the G. L. Thebaud, so i will let it slide. Mostly because i do not have the means to un-sand the base of my bowsprit. I drilled the proper holes for the bobstay/collar chains, whose holes were non-existent and whose eyebolts did not come with the kit. I ended up stealing some from my old HMS Victory kit (which i will unceremoniously rob of more rigging elements for this project) and inserting them into the holes. The next step of this project will be to finish the bowsprit tackle, drill holes for necessary eyebolts in the deck, and paint the deck as well as hatches, mast housings, and other deck furniture.

I believe the idea that ships of the period were painted red in their interiors to lessen the psychological impact of battle was simply a Victorian myth. The interior should probably be painted as she is seen in Portsmouth today.

Hey folks! Me again. Today i am starting my first true build log on this forum. This log will concern a project i am doing for a friend, a modified version of Pyro's American Cup Racer (G. L. Thebaud) from 1958. This project will not be a total bash, not even close. However, i am heavily modifying the rigging and including parts from other kits to facilitate that. I will end up ordering high-quality cloth sails for this ship from HiSmodel in the Czech Republic. Anyway, wish me luck! obviously, i will be asking many questions.

That was well after the first voyage of Columbus, during the golden age of piracy.

In that case, i hope and pray for your recovery. That must be a really hard thing to deal with, losing your sight and being unable to do your favorite activities. Rest up and take care of yourself. The Pinta will always be here wating, and we will always be here for you. Take it easy, brother. 😉

I don't think many people would have survived an amputation in 1492, especially at sea. Amputees would probably not sail aboard a ship, as they would have been considered unfit to sail.

Still waiting... Harriet Lane bust be a really involved build!

@mnlHonestly, i think that much canvas is simply inefficient. It would be so hard to handle it all at once, it would become less practical that handling less sail more efficiently and thus more skillfully.

I am 17, almost 18. I started at your age with the Revell USS Constitution in 1/96 scale. It turned out to be a total disaster. My biggest piece of advice? DO NOT start with a huge, complicated kit. Start small, with maybe a 1/96 scale schooner or yacht. Something easy but challenging, that you will feel proud of but not be frustrating or beyond your level. It's what i wish i had done. Ship modelling is an intriguing hobby, and even the most experienced modeller has much left to learn. Ask questions, i know that everyone here is itching to be able to answer and share knowledge. No question is a stupid one. The world of sailing ship models will consume you, and i suggest you jump in. There is a world of fun, learning, passion, and accomplishment waiting for you.

If we assume that none of the pole is obscured by the spinnaker itself, it would be just short enough to fit under the point at which the fore topmast stay attaches to the foremast for the purposes of tacking.

no no no, i was thinking that the pole was shorter than it looked because it isn't obscured by the spinnaker itself, and also, why is the clew of this mystery sail rigged to the boom of the mains'l and not belayed to the deck like a normal fisherman?

I really WOULD like to include this mystery sail on some of my builds, if i could find out how the darn thing is rigged! (and how it tacks)

mnl, how would you get even a smaller spinnaker pole from starboard to port and vice versa? I think the spinnaker pole may be sort of an optical illusion, and that the other side of the spinnaker, obscured by the half facing the camera, actually extends backward and that we are looking at the side of the sail. That would mean that the spinnaker pole does not extend out of view, but rather is smaller than it looks.

This is the racing yacht "Westward" built in 1910: I am having a lot of trouble identifying a sail on the vessel, the slack sail that seems to be mounted on the main topmast stay and whose clew seems to rig to the mains'l boom. How is it rigged? what is its name? Any help is much appreciated. Also, a nagging afterthought: How does a spinnaker tack?

I saw your Constitution log. Very impressive! It looks like you hadn't installed the trysail mast yet. As of yet, i am working on the mizzen shrouds. All i have left to do in terms of hull work is a couple pinrails, cleats, ladders, and the ship's wheel. After that, it's time for sails!! I hope your "friday" is going well!!

Check out Woodrat, his scratch builds are truly museum quality. He's the best i've ever seen at that.

I was very impressed by the masts and yards in this kit- They bent and refused to break! overall, the plastic quality is top notch, something heller could use to learn.

Of course you're so good at scratchbuilding wood. You switched from plastic to wood at my age. I won't be seventeen for long, mate. Even at my age, you were proving yourself to be the best. A list of places that may want your ships: https://www.historyhit.com/guides/maritime-museums-to-visit-around-the-world/

Ok guys, let's play "Never Have I Ever", I'll start: Never have i ever seen such a cop-out excuse from a model company not to include rigging instructions.

Thank you all for your kind words! The only bit of "luck" here, it would seem, is the insane find of this gem on Ebay. You can't get the kit anywhere else, at least from here in the States, i found. I look most forward to asking nagging questions and advancing my knowledge in model shipwrightery.

Hahahahaha! Warhammer is something i would very much enjoy if i could afford a 3d printer. I used to buy and paint the models until they became too expensive for sustainability.

I am new here, and i guess this is a rite of passage. I am seventeen years old, from California, USA. I have been making model ships since the eighth grade, but still have a world to learn. My introductory model will be the 1/96 scale USS United States, by Revell. Wish me luck!

Absolutely phenomenal, dude. The more i see your work, the more convinced i am that you should make some sort of living off of this. Amazing ship.

Never have i seen such an incredible scratch-build in my entire life. Scale it up, and you have a real round-ship. Amazing! Medieval museums would thank their lucky stars to have such a model.