Jump to content

Pat Matthews

  • Content Count

  • Joined

  • Last visited

Profile Information

  • Location
    Temecula- Wine Country, California

Recent Profile Visitors

1,473 profile views
  1. Yep, the products are offered by market... in this case, for the builders of the very common 1:350 battleships. The smallest stud link chain I ever printed was 13 links per inch, suitable for the new 1:200 plastic battleships. It couldn't be produced reliably, so I gave up on it. I still get plaintive calls- "do you have any more chain???" This PE chain could be available for 1:200 BB's, would be a little easier to work with!
  2. That 2nd one is photoetched 0.005" brass... here is the maker's page: https://www.whiteensignmodels.com/p/WEM+1350+Battleship+Stud+Link+Anchor+Cable+PE+35157/10061/#.XsavsWhKiUk
  3. I support the economic principle of "division of labor"- I let the pros do it! This example was from Shapeways.
  4. I have done nickel plating at home, relatively inexpensive and easy. I wouldn't recommend rhodium plating for an amateur, even though you can buy the supplies. A 500ml bottle with 1g Rh costs almost US$500. Here is a video demonstrating an available set-up for a jeweler: https://www.riogrande.com/article?name=How-To-Rhodium-Plate-Jewelry-Video The cost for the plated Rh is small, as there is so little used.... just as with gold plating. But the investment to do it properly is a disincentive!
  5. That fine chain is all very fine... but if you need some chunky stud-link anchor chain, it can be printed!
  6. I have even cut nice strips from 0.005" [0.13mm] stainless steel with a paper cutter like that.
  7. Exactly, Kurt... 'tis easier to "carve" many parts from solid, rather than assembling little bits. A mill is not required... a drill press and a jeweler's saw will often get you 90% of the way. Files and polishing for the rest. Myself, I now 3d print most of these parts (waxes actually, which are fed into lost wax casting). Below: A tree full of printed cleats. The color is misleading, they are unplated brass.
  8. I respect all who wish to make a hobby all in itself of photoetching. Having done some PCBs and etched model parts myself, and having dealt with the nasty chemicals, I decided the better approach was to take the same money and pay a specialist for better parts. I've had good luck with Hauler in the Czech Republic: https://www.etchworks.eu/
  9. No question, this is a challenging part... almost as bad as stainless steel cutwaters! But it is possible, and is easier in larger scales. The pictures here are for a 1:8 scale model, and all is done by hand (by a friend, who has alien powers). The plastic windscreen is sandwiched between brass frame parts, which are secured with very small watch screws. Note that the plastic is curved in a single direction, not compound curved... the cross section is an "extrusion" in the direction of the center frame. The intersection of this extrusion with the deck is tricky! Work with brass... it can be polished and plated... silver and "chrome" paints will never look good. You can do a convincing job with brush-nickel plating. This takes nothing more than clean polished parts, a special solution, and a metal acid brush connected to a 3V source. You may get even nicer results by going to a jeweler for a pro polish job and then rhodium plating... rhodium looks just like chrome, and jewelers regularly replate rhodium rings and such, as the rhodium is a bit soft and wears off over time. The shiny parts shown here were 3d printed in brass (printed waxes, used in lost wax investment casting), and then professionally polished and rhodium plated. I have also used the 3d brass printing process to make older style windscreen frames, see examples below.
  10. I'd use it for... soldering circuit boards! One of my creations:
  11. Thanks for YOUR comments, Bob. By any chance was that big 34 footer "St. Erina"? She's seen some hard times since then. News on that, and hundreds more photos, at my Monterey Clipper site: https://montereyclippers.wordpress.com/ -Patrick
  12. Thanks for the comment. There is a lengthy build thread posted on RC Groups: https://www.rcgroups.com/forums/showthread.php?2601629-Hicks-Engine-Project And of course the Ships in Scale article (Summer & Fall 2017).
  13. Thanks Nils. For more info about the model, see the Gallery page description- including a link to a video of the engine operating!
  14. Fans of San Francisco's "Monterey Clipper" fishing boats know that most were originally powered by Hicks single cylinder gas engines. Since the engine was visible in the semi-enclosed wheelhouse, it becomes a necessary but challenging feature in a model. No complete plans have been published for the Hicks, but I was able to photograph a complete engine's worth of original part blue prints at the library of the San Francisco Maritime Park. This 1:8 scale model was then built in CAD, and most parts were 3d-printed in plastic. Most of the brass and bronze parts were investment cast using 3d-printed waxes. Other parts were machined or photoetched from brass and stainless steel. The model appeared on the cover of the Summer 2017 "Ships in Scale". Search Youtube for "Yuba Hicks" to see the engine's animated operation and authentic sound.
  15. The smallest I've made is 1/8" tube OD (1/4" cowl OD)... but they start to get a little chunky in the smaller sizes. At least they're still hollow! Rendering of the 1/8" tube size:

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
  • Create New...