Jump to content

Dfell

Members
 View Profile  See their activity

  • Posts

    240

  • Joined

  • Last visited

 Content Type 

Everything posted by Dfell

  1. Dfell
    Hello - just a short update. Pumps now in place - look a large feature on the deck. Maybe made them too big. Fixed the what ever it is called skirt around rudder. Copied this from tkay 11. Made the round fitting from scrap ply and not brass. Thank you for looking in and the 'Likes' ccoyle (Chris) - Sorry not come across your build and cannot see it in the index. Maybe you could show me where to find it as would like to see your build. Regards Doug
  2. Dfell
    Hi - progress update. Guns fully rigged although I haven't seen anyone do the rear rigging so far so maybe I'm missing a trick here. Thank you for your kind comments Blue Ensign and Edwardkenway but I feel my rigging is a bit clumsy and not realistic - maybe make the rope hang more naturally or frapp them (hopefull right term). Blocks look too large. Other bits and pieces added -cleats, belaying racks (possible should be fitted slightly higher), timberheads and catheads (dry fitted). Pumps made - although it took a few attempts. Used kit parts but trimmed / thinned them down. Afraid they don't look too good close up. BenD - Please don't throw your Sherbourne in the bin as I am using yours as a good guide to help me with this build. Regards Doug
  3. Dfell
    Hello Liam Have fun doing the rigging of the cannons - very fiddly 🙂 Used 0.75 thread for main restraining rope and 0.10 for the other bits. Nice to see another Sherbourne. Regards Doug
  4. Dfell
    Hello - an update on the cannons. Now nearly completed rigged up - just the rear set up to do. First I had small hooks attached made from very small eyelets to the 2mm blocks but when put in place the blocks were just about touching so just fixed eyelet into carriage side and bulwark. Difficult not to make it all a bit out of scale and clumsy. Have filled the rather bad holes in winch. Thanks for looking in and the encouraging comments and likes. Regards Doug
  5. Dfell
    Hello - a quick update as I am awaiting on some bits to rig the cannons. The cannon carriages are from Chris Watton - so thank you Edwardkenway for your help there. Like the detail to the wheels. Hatches made and placed in situ not glued as yet plus some other deck fittings. Some rather bad square holes put in the winch🙁 Thank you for looking in and the comments / likes. KevW good luck with your Sherbourne - look forward to seeing it. Regards Doug
  6. Dfell
    Sorry - just realised it was Chuck Passaro I contacted and not Chris so I will try Chris Watton. Thank you for all for your help. Regards Doug
  7. Dfell
    Hello Edwardkenway - yes I asked Chris but he said he doesn’t have anything that size (3 pounder) and didn’t think anywhere else would. I will look on his site again - maybe the smallest size carriage he does might be okay as the kit supplied carriages look a little bit small for the barrels and fiddly to fully rig. Thank you.
  8. Dfell
    Okay - quite a few steps on. Hull painted white as you can see. Rudder pintells etc made from scrap brass with small drops of pva glue to simulate bolts or at least trying to. Name placed on stern - not painted just kept it brass. Was tricky to do as letters are in italics and being placed on a curve the left half of the word always looked more upright than the right half which looked like it was leaning more. Constantly was scrambling on the floor looking for lost letters - was wondering at times if I might have to shorten the name or come up with something different. Some cannons partly made up. Tried to find another supply in box wood as the wood for the carriages and wheels wasn't very good but with no success. So will continue with what I have. Bolts fitted to carriages as well as a groove scored and the straps are black tape. Barrels seemed to want to point downwards Tiller was remade as the supplied one didn't look right. Thank you Ryland Craze and Edwardkenway for your kind comments. Thank you for looking in. Regards Doug
  9. Dfell
    Hello - Hull nearly complete with the wale attached. The Wale was a little tricky but got there. For some reason the Keel was a fraction too short - probably due to my dodgy build work - so a bit was added. Capping rail in place plus trim. Borrowed from that great builder Dubz - a bit of support / belaying pin rack at the stern which I have since see another builder had the same idea on his Sherbourne. Just wish I could also borrow Dubz's skill........ The Bowsprit opening in place. Thanks for the 'Likes' on previous post and thank you for looking. Next is to paint lower hull section white. Regards Doug
  10. Dfell
    Hello Duncbe - Gutermann black thread. I use this thread as it’s not fuzzy but the method is probably frowned upon as everyone uses pencil or something similar on the edges. Using the thread makes the caulking look a bit wide (not to scale) but I like it and have used it on all my builds. Thank you for the nice comment Regards Doug
  11. Dfell
    Hello - some further progress. The second hull planking complete. Not brilliant but am painting lower half white so hopefully things might improve. Made a top rail for the stern. It was done from scrap wood in three pieces - first made a template from card. Next will be the wale and keel sections added. Again thanks for looking and the 'Likes' Regards Doug
  12. Dfell
    Hello - a small update. 2nd planking started. Have started where the wale will be so the corner at the stern will easier to deal with and then work up. This left slithers of planking to be added at the stern. Then the inner Bulwarks were done. Not good at filing the gun ports so prior to planking inside and out painted the edges of gun ports of the ply in red so as to keep a check on filing / sanding. I have found myself not following the order of building from the instructions so no doubt this is going to end in tears. Deck planking done. Thanks for looking and the 'Likes'. Regards Doug
  13. Dfell
    Hello - a bit further on. The gun port strips added. Next stage first planking. Not pretty but hopefully a good enough base for second planking. It's tempting to keep sanding but risky. Anyway thank you for looking in and the likes on the previous post. Regards Doug
  14. Dfell
    Hello - Thought I'd do a smaller kit so hopefully it will not take quite so long. The first steps done with the bulkheads. Next the balsa filler bits bow and stern plus a bit of support for the mast. The ply decking sheet dry fitted so as to lay the central planking with access to trim around hatches etc. It's good to see there are currently other Sherbourne builds going on at the moment so I'll be able to learn what to do. Thanks for looking in. Regards Doug
  15. Dfell
    Thanks Blue Ensign, ccoyle, Martin W for the comments Martin - not surprised your build is taking longer - you're putting so much more effort and creativity into your build. I find it hard enough to do the basics and my knowledge about these ships needs to be better. ccoyle - I guessing some of the Fly build logs on here are incomplete due to the site's problem awhile back as well for some perhaps life getting the way. Blue Ensign - again thanks for advice / help from you and from your incredible Pegasus build. Thanks Doug
  16. Dfell
    IHello - I think I have finished as I cannot find anymore to do and besides there is no more room to do anything. Seems there is only one other finished Fly on this present site but would be happy to be corrected. Being my second build this kit has been harder as obviously there's more to learn and do especially in the rigging department. A delicate kit to work on - easy to break things. Anyway hopefully this log will help other Fly builders even it's not how to build it. Anchors in place and secured. Overall views. Slightly disappointed with the pull on the stays. Now to sort out a new plinth and glass case. Thanks for looking and the nice comments throughout the build - much appreciated. Would like to add a thank you to Blue Ensign for his help and I got a lot from his Pegasus build Regards Doug
  17. Dfell
    Hello Binho - you possible could try the manufacturer of the kit to supply you with a new keel. Could be worth a try. Regards Doug
  18. Dfell
    Hi - finally finished last rigging sheet (Number 8). Quite a challenge as it got harder to get to or do anything. Thank you landlubber Mike for your comments but in reality this built has not turned out as well as I would like. For example some yards are not aligned perfectly and the Stays are distorted due to attached rigging. Base is temporary while I sort a more suitable sized one and in oak. Sorry if some things I have done are not historically correct. the plans I think show lines to be belayed to the rails but have done them to the Timberheads. Also added a another Cleat as I could not understand how in practice two lines would be tied to one cleat. Next will be the Anchors. Did not think the kit supplied ones were the correct size so bought larger ones. Thanks for looking. Regards Doug
  19. Dfell
    Hello Blue Ensign - okay I will run the sheets and tacks on the outside. Did that at first but thought it wrong as they rubbed up against the standing rigging. SkipW - thanks for looking and your comments. Hope your Pegasus is going well. And thank you Martin for comments. Regards Doug
  20. Dfell
    Hello - things are getting rather harder to do. Having to move slowly with concentrated effort with the rigging and it is harder to tie lines off. Some lines not tied off as they will have to be loosened so as to do the rest of the rigging lines. Some photos. The anchor cables in place. As I did not think far enough ahead and prepare the hatch cover to take the cables I have done the same as in my HM Brig Supply build and put the cables through the deck. Thank you for looking in. Regards Doug
  21. Dfell
    Martin - you are certainly making life difficult for yourself but it’s all looking good. Regards Doug
  22. Dfell
    Thanks Kevin Kenny - good illustrations. Think I will do a knot. Thank you Doug
  23. Dfell
    Many thanks Blue Ensign. Appreciate the reply. Regards Doug
  24. Dfell
    Hi - can anyone please help. Not clear as to how the lines are attached to blocks on the yards? Are they tied to the blocks or go through the block with a knot tied to stop them passing back through? The lines I am referring to have the numbers 48 and 49. Thank you. Doug
  25. Dfell
    Thanks SpyGlass for the explanation. Had to make a correction to my last post - the lantern was a Caldercraft item. Doug

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...