-
Posts
106 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Hollander-jan
-
Hoi Gregor, Nice the name looks verry good. As all of the ship. I wish I good have some off your skills, but I think it is all to do with experience and patience and caracter. Neverteheless a ferry nice pice of work. Jan
- 210 replies
-
- Sherbourne
- Cutter
-
(and 5 more)
Tagged with:
-
Thank you Tony, Jan and Kester for the uplifting comments. I will definitely continue, did some experiments today. This support is more than welcome. Eventually it will work out. And then we look back in amazement. And we'll say it was difficult but the job is done. Know now that from the center to the boards is better. Have some other work in the house to do but I'll be back be sure off that. Jan Tony succes with your axel trees!
-
Thank you Kester for this reply. As you might well feel I am not happy with how it looks. I have put the whole thing aside for a while because when I go on it will take me off. I am thinking off an other approch and do it all over again like you say start from the center and going outwards. There is enough wood to do it again. I have even wood to make a new margin (bought it today). I give a good thought and deside what to do. To cut the margin plank as I did was way to let it fit But again I give a rest and try to think of doing it all over from the center to the margin with new marging planks it is worth the effort. Thanks again for your advise. Jan
-
Hello Matti, just had a look at what your building. Looks verry good and great photografs. I will be following the build and sure it wil be a spendid ship to see. Jan
-
Nasgûl, I thank you for what you said and appriciated verry much. I have done some building in the past but this is more difficult than that wat i did. Never the less I do what I can. Luckely I am a determent man and do not give up easely. So in the end there will be a ship and my skills wil have been developed. Bonus is the fun I have to do it. Skol Jan
-
Thank you Tony and Olie at least I have the notion now to go on with this project. Yes Tony the planks are just placed on paper with that what i have now on margings. So there is room to manoeuvre. I wil go on and keep you posted this is a real project and there is on some point no way back so I have to be carefull. Jan
-
I have a problem with the deck planking. I made margin planks (they have to be shaped in the right size) from left over wood from the deck cut out. What is the problem: 1 - the margin planks are off color with the deck. 2 - I do not know if I am on the right track with these margin planks 3 - I realy have no idea howe it will look when done 4 - is it better to abandon this margin planking and go for planking without them Can any off you give me some advise? Jan pictures of the situation dry fit on paper.
-
Thank you Jan, Tony and Kester for the answers you gave. The matter is simple I have to do the rigging and all the small knots to get it right. ok in due course we will see to that. And of course I should have looked in AOTS Cutter Alert which is on my pc.. After a lot of careful cluing sanding and woodworking with model knifes the hull is nearly finished the ports are open. It is all in all a satisfactory thing to look at. I did the best I can do for now but learned a great deal, next time will be different for now it is good to see that she is coming along. After a bit of painting we will see what to do with the deck have to do a bit of study about that one. Jan
-
Hello Sherbourne loggers and all the others. I have a question about cannon rigging. Here is a picture of a cannon aboard a ship. The question is, because I can not recollect where a got it, is this correct for English war ships. I find the rigging easier to do then other riggings. This is the cannon in question. Jan
-
Gregor it looks great. Your build is very nice, and a great reference for me. The port lids are superbly and very well done as the rest of the ship. Looking forward to your rigging. Jan
- 210 replies
-
- Sherbourne
- Cutter
-
(and 5 more)
Tagged with:
-
Thanks Tony and Gregor that gets me forward. Sorry Gregor but as always Tony gifs an answer that is so well done you can not mis what he is telling excellent man, I love your reply's. (is your milling bit already there?) Another thing is that I have decided to go for six (6) guns. This is due to the replacing of the gun ports after gluing the bulkward wrong. It is not a big deal for me because the ship is, as I said, a schooling project. Opening more ports wil give trouble with the channels. On the other hand I will construct a nice deck house to let the captain enter his quarters. You wil see in due course. Jan
-
A jig for the carriages I have made a jig for putting togeter the carriage for the cannon. My problem was the carriage is to smal to handel and to get a copple of carriages that are the same I had to get something that would help me to get it the same. A jig was the answer. But to glue the carriage together and getting them out of the jig was something else. The anwer is shown the picture. The axels go in, A and the sides fit over the axels. The main problem was all has to very tight. Sanding the axels to the right proportions so they will get in and out is what you have to do and be sure off. The sides have to fit easeley as well. But all has to be tight. Dry fit to be sure. It all looks much work but it gave me confedence in getting the carriages right. And all off them the same and as Tony says not look like "Go Carts". The jig as shown in the picture is not perfect. The first carriage worked wel but the next I made where more problematic. The fitting was not precies enough and by the lake of tollerance in the scale it was not to be adjusted. After all a nice exercice but not what I had expected. It helped a bit but after all I had to make them by hand. Wich was not aesy because of the trembling in my hands. Iff I had to make more carriages I would have made a better jig but now it was to do by the number of carriages 8 in total. The wheels will be put on and all will be painted after that inner bulkward and the deck. Progress will be slower because of other building projects in the house (bathroom) foto jig . Jan
-
Thank you for that perfect post. I dont't know if we are in the same age I am turned 66 last december retired after 43 years of hard working. I have all the time in the world to spent on my family, dog, boat, and housholding. The admiral is younger and stil working. It is realy wonderful to see and read what you do with the boat. I myself doing the best I can and it turns out satisfactory for me. In my own post I wil tell about a jig I have made for the construction of the cannon cariages. Works wel and gives me confidence for the rest of the small stuf. It was fun to do this jig. Jan
- 269 replies
-
- Caldercraft
- First build
-
(and 3 more)
Tagged with:
-
This is all very impressiv. And a major contribution to how to do things. I feel a near neatherthaler as I read this. It is all really nice and off a great workmansship. looking forward to the cannons working on them now they are so small! Jan
- 269 replies
-
- Caldercraft
- First build
-
(and 3 more)
Tagged with:
-
Thanks for this very well done answer Kester. I have thougt about planking around the ports in some way and will do this in the futher. For now I am busy and very careful opening the ports and is satisfactory. The trouble is that there is not enougf patients in me but it is comming around. About the ports and the places this is due to an erlier mistake. I have checked but all wil go as far as deck is concerned. I see this as a learning ship and stil having fun to work on it. Jan
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.