achuck49 Posted November 5, 2016 #1 Posted November 5, 2016 good Saturday morning, I recently purchased a combined 2" belt sander / circular sander combination. There are no dust bags included. Is there something around the home that would do the trick??? Cotton socks are too porous, I ripped up some old tee shirts and while they were better than nothing, they did not seem as efficient as the commercially made dust bags. Any suggestions??? Chuck Aldrich (feeling great on this fine Saturday morning) mtaylor 1 Quote Chuck A. If at first you don't succeed, destroy all evidence that you even tried.
jud Posted November 5, 2016 #2 Posted November 5, 2016 Most power tools with any dust handling provisions were designed to be used in combination with a shop vacuum cleaner. I do have a canvas bag on my spark plug cleaner but that bag also holds the blasting grit without exhausting it out of the cleaner, kind of a closed loop system. Might take another look at the instructions for the dust handling feature. jud mtaylor and Canute 2 Quote
achuck49 Posted November 5, 2016 Author #3 Posted November 5, 2016 No instructions, purchased from a friend. Canute and mtaylor 2 Quote Chuck A. If at first you don't succeed, destroy all evidence that you even tried.
Jaager Posted November 5, 2016 #4 Posted November 5, 2016 Does the tool have a fan that exhausts air from the port? The manufacturer may have a site and post an IPL for the tool. You could try to find a disposable bag for a vac cleaner that is small enough and has a opening close to the port in size and use a pipe clamp or a cable tie to hold it on. mtaylor and Canute 2 Quote NRG member 50 years Current: NMS HMS Ajax 1767 - 74-gun 3rd rate - 1:192 POF exploration - works but too intense -no margin for error HMS Centurion 1732 - 60-gun 4th rate - POF Navall Timber framing HMS Beagle 1831 refiit 10-gun brig with a small mizzen - POF Navall (ish) Timber framing The U.S. Ex. Ex. 1838-1842 Flying Fish 1838 pilot schooner - POF framed - ready for stern timbers Porpose II 1836 brigantine/brig - POF framed - ready for hawse and stern timbers Vincennes 1825 Sloop-of-War - POF timbers assembled, need shaping Peacock 1828 Sloop-of -War - POF timbers ready for assembly Sea Gull 1838 pilot schooner - POF timbers ready for assembly Relief 1835 packet hull USN ship - POF timbers ready for assembly Other Portsmouth 1843 Sloop-of-War - POF timbers ready for assembly Le Commerce de Marseilles 1788 118 cannons - POF framed La Renommee 1744 Frigate - POF framed - ready for hawse and stern timbers
Crowe Posted November 13, 2016 #5 Posted November 13, 2016 try a shop vac if you have one. You can blue tape it to the outlet tube. Canute 1 Quote
mrjimmy Posted January 27, 2017 #6 Posted January 27, 2017 I wonder if used nylon stockings or pantyhose would work............. Jim Canute and mtaylor 2 Quote
S.Coleman Posted January 27, 2017 #7 Posted January 27, 2017 How abut a brown paper bag? Would that be any help? mtaylor 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard
jud Posted January 27, 2017 #8 Posted January 27, 2017 I wonder if used nylon stockings or pantyhose would work............. Jim X used to wear pantyhose, seemed to pass gas fine, never noticed any dust. mrjimmy, mtaylor, Canute and 2 others 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.