Ulises Victoria Posted March 10, 2014 #31 Posted March 10, 2014 Coming along really nicely, DiKri. Good job, very clean. Quote There aren't but two options: do it FAST, or do it RIGHT. Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina. Last finished projects: Royal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90; Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models. So much to build, so little time!
Karleop Posted March 13, 2014 #32 Posted March 13, 2014 Hola DiKri, you are doing a really nice work with this ship. It looks wonderful!! Saludos, Karl Quote Finished Models (Gallery): Pandora (Constructo), HMS Endeavour (AL), San FranciscoII (AL), Fishing boat (scratch), Vasa (Billing Boats) Construction logs: Vasa (Billing Boats) Pride of Baltimore II (M. Shipways)
md1400cs Posted March 13, 2014 #33 Posted March 13, 2014 DiKri, Hi, it's been a while since you have posted. Nice to see you back. Looking very nice. Michael Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa -
DiKri Posted October 5, 2014 Author #34 Posted October 5, 2014 Some months further now... I completed the standing rigging. WackoWolf, mar3kl, tasmanian and 5 others 8 Quote Current build: Wasa (Corel) Already build: HMS Fly (Victory Models)
jollymillar Posted February 14, 2015 #35 Posted February 14, 2015 DiKri, Fabulous looking model, you must be well pleased with it so far. Could I ask what stain you used on the hull and if any on the decking ?? Some leave their hulls pain wood, but from what I have seen I like the staining. Any thoughts would be welcome. Thanks, JM Quote
DiKri Posted February 15, 2015 Author #36 Posted February 15, 2015 DiKri, Fabulous looking model, you must be well pleased with it so far. Could I ask what stain you used on the hull and if any on the decking ?? Some leave their hulls pain wood, but from what I have seen I like the staining. Any thoughts would be welcome. Thanks, JM Hi JM. Thanks for your post. I didn't use much stain on this model. For the second layer planking, walnut is used for the upper part, mahony for the lower part and dibétou for the deck planking. The wood was then protected with a few coats of mat acrylic varnish. Only the darker galleries where stained with walnut stain from Admirality Paints and then varnished. For the masts, I used a walnut coloured varnish (Levis Linitop). Dirk jollymillar 1 Quote Current build: Wasa (Corel) Already build: HMS Fly (Victory Models)
jollymillar Posted February 15, 2015 #37 Posted February 15, 2015 Dirk.... thanks for the information, I will certainly look at this to see if it will work out. JM Quote
the learner Posted May 19, 2019 #38 Posted May 19, 2019 Nice job, well done! Quote Cheers, GuyThe LearnerCurrent Member NRG,SMA Current Build: HMS Triton 1:48 on line
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.