SGraham Posted July 14, 2017 #31 Posted July 14, 2017 Shabbat Shalom, Rony. In the shop notes section of this website there are a number of planking tutorials that will help you finish up the planking on your model. See the very first post under the section on Building, Framing, Planking and plating a ships hull and deck. In it Mark Taylor gives a link to the planking tutorials. I used them on my Shenandoah hull and found them extremely helpful. Your ship is looking very good, by the way. Steve rony 1 Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 18, 2017 Author #32 Posted July 18, 2017 Finish gluing one side of wood mahogany pasteboard. SGraham, coxswain and src 3 Quote
SGraham Posted July 19, 2017 #33 Posted July 19, 2017 Wow, Rony! What beautiful job you have done with the mahogany planking. It looks very good and clean. Steve rony and coxswain 2 Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 19, 2017 Author #34 Posted July 19, 2017 Thank you very much SGraham , now I paste the second part. SGraham 1 Quote
rony Posted July 21, 2017 Author #35 Posted July 21, 2017 good eveningI finished pasting the other side. Zarkon, SGraham, modlerbob and 1 other 4 Quote
SGraham Posted July 21, 2017 #36 Posted July 21, 2017 Very nice and clean planking, Rony! Steve rony 1 Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 24, 2017 Author #37 Posted July 24, 2017 good eveningFinish the pasting of light wood pallets at the top right. coxswain 1 Quote
SGraham Posted July 24, 2017 #38 Posted July 24, 2017 The two-toned planking looks so good, Rony. I especially like the job you did on the transom. Very nice work! Steve rony 1 Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 24, 2017 Author #39 Posted July 24, 2017 Thanks SGraham, The upper part took me quite a few hours . Quote
SGraham Posted July 24, 2017 #40 Posted July 24, 2017 I believe it! But the time was worth it. Quote completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 25, 2017 Author #41 Posted July 25, 2017 You're right, the distance is not right, I'm trying to fix it. There is an example of a correction I saw here in the forum : Quote
rony Posted July 29, 2017 Author #42 Posted July 29, 2017 HeyI stuck the two wooden rails to the sides of the ship. jay and coxswain 2 Quote
src Posted July 29, 2017 #43 Posted July 29, 2017 Nice work Rony, that is going to look real good with some oil on it. Sam jay 1 Quote Current Build Constructo Enterprise
rony Posted July 29, 2017 Author #44 Posted July 29, 2017 Thanks src, I will revalue the oil. src 1 Quote
rony Posted August 6, 2017 Author #47 Posted August 6, 2017 (edited) HiiPasting wooden planks inside the ship. I have a question about painting metallic parts for black.What kind of paint do you recommend to paint the anchor?My kit is silver. Edited August 6, 2017 by rony coxswain and src 2 Quote
src Posted August 6, 2017 #48 Posted August 6, 2017 Rony Check this article out over in the MSW painting forum Sam rony 1 Quote Current Build Constructo Enterprise
HIPEXEC Posted August 7, 2017 #49 Posted August 7, 2017 Wow! Nice work. Quote Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
rony Posted August 11, 2017 Author #50 Posted August 11, 2017 Cutting a railing using the method I did. aviaamator and coxswain 2 Quote
rony Posted August 12, 2017 Author #52 Posted August 12, 2017 After pasting the two pillars of the railing. src and coxswain 2 Quote
zappto Posted August 12, 2017 #53 Posted August 12, 2017 This is inspiring build, top quality job! Cant wait to see it all! rony 1 Quote Current build: Mamoli - La gloire 1778 Finished builds: Mamoli - Friesland 1663 Mamoli - Lexington 1776
rony Posted August 14, 2017 Author #55 Posted August 14, 2017 (edited) HiiPasting all the pillars of the rail to the ship. I hope it's good. Unfortunately, the poles of the rail and wire pillars were wrong. I had to bend them to 3 mm thick. The wrong rod was mistaken for the entire length of the ship, where I had to stick a 4 by 3 mm Edited August 14, 2017 by rony coxswain and src 2 Quote
rony Posted August 16, 2017 Author #56 Posted August 16, 2017 good eveningAlmost finishing the railing, coxswain 1 Quote
rony Posted August 18, 2017 Author #57 Posted August 18, 2017 (edited) PeaceFinish a railing and a little addition . Edited August 18, 2017 by rony coxswain and src 2 Quote
rony Posted August 19, 2017 Author #58 Posted August 19, 2017 (edited) I built the part of 4 rods that I glued together. And then polished to the appropriate thickness. Edited August 19, 2017 by rony BLACK VIKING and coxswain 2 Quote
src Posted August 19, 2017 #60 Posted August 19, 2017 The wood looks so much better than the cast metal Rony. Are you going to add a pin to the bottom when you glue your parts down? Sam Quote Current Build Constructo Enterprise
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.