SGraham Posted July 14, 2017 #31 Posted July 14, 2017 Shabbat Shalom, Rony. In the shop notes section of this website there are a number of planking tutorials that will help you finish up the planking on your model. See the very first post under the section on Building, Framing, Planking and plating a ships hull and deck. In it Mark Taylor gives a link to the planking tutorials. I used them on my Shenandoah hull and found them extremely helpful. Your ship is looking very good, by the way. Steve rony 1 completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 18, 2017 Author #32 Posted July 18, 2017 Finish gluing one side of wood mahogany pasteboard. coxswain, src and SGraham 3
SGraham Posted July 19, 2017 #33 Posted July 19, 2017 Wow, Rony! What beautiful job you have done with the mahogany planking. It looks very good and clean. Steve coxswain and rony 2 completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 19, 2017 Author #34 Posted July 19, 2017 Thank you very much SGraham , now I paste the second part. SGraham 1
rony Posted July 21, 2017 Author #35 Posted July 21, 2017 good eveningI finished pasting the other side. modlerbob, Stevinne, SGraham and 1 other 4
SGraham Posted July 21, 2017 #36 Posted July 21, 2017 Very nice and clean planking, Rony! Steve rony 1 completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 24, 2017 Author #37 Posted July 24, 2017 good eveningFinish the pasting of light wood pallets at the top right. coxswain 1
SGraham Posted July 24, 2017 #38 Posted July 24, 2017 The two-toned planking looks so good, Rony. I especially like the job you did on the transom. Very nice work! Steve rony 1 completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 24, 2017 Author #39 Posted July 24, 2017 Thanks SGraham, The upper part took me quite a few hours .
SGraham Posted July 24, 2017 #40 Posted July 24, 2017 I believe it! But the time was worth it. completed models: Shenandoah (Corel) waiting on the shelf: La Sirene (Corel) Half Moon (Corel) Puritan (Mamoli) Patsy (derisively): "It's only a model." Arthur: "Sshhh."
rony Posted July 25, 2017 Author #41 Posted July 25, 2017 You're right, the distance is not right, I'm trying to fix it. There is an example of a correction I saw here in the forum :
rony Posted July 29, 2017 Author #42 Posted July 29, 2017 HeyI stuck the two wooden rails to the sides of the ship. coxswain and jay 2
src Posted July 29, 2017 #43 Posted July 29, 2017 Nice work Rony, that is going to look real good with some oil on it. Sam jay 1 Current Build Constructo Enterprise
rony Posted August 6, 2017 Author #47 Posted August 6, 2017 (edited) HiiPasting wooden planks inside the ship. I have a question about painting metallic parts for black.What kind of paint do you recommend to paint the anchor?My kit is silver. Edited August 6, 2017 by rony src and coxswain 2
src Posted August 6, 2017 #48 Posted August 6, 2017 Rony Check this article out over in the MSW painting forum Sam rony 1 Current Build Constructo Enterprise
HIPEXEC Posted August 7, 2017 #49 Posted August 7, 2017 Wow! Nice work. Rich Rich USS Constitution by hipexec (Finished build) Virginia Pilot Boat 1805 (gallery - first build) USS Syren (USS Argus) by Hipexec Joshua Slocum's Spray by HIPEXEC
rony Posted August 11, 2017 Author #50 Posted August 11, 2017 Cutting a railing using the method I did. coxswain and aviaamator 2
rony Posted August 12, 2017 Author #52 Posted August 12, 2017 After pasting the two pillars of the railing. coxswain and src 2
zappto Posted August 12, 2017 #53 Posted August 12, 2017 This is inspiring build, top quality job! Cant wait to see it all! rony 1 Current build: Mamoli - La gloire 1778 Finished builds: Mamoli - Friesland 1663 Mamoli - Lexington 1776
rony Posted August 14, 2017 Author #55 Posted August 14, 2017 (edited) HiiPasting all the pillars of the rail to the ship. I hope it's good. Unfortunately, the poles of the rail and wire pillars were wrong. I had to bend them to 3 mm thick. The wrong rod was mistaken for the entire length of the ship, where I had to stick a 4 by 3 mm Edited August 14, 2017 by rony coxswain and src 2
rony Posted August 16, 2017 Author #56 Posted August 16, 2017 good eveningAlmost finishing the railing, coxswain 1
rony Posted August 18, 2017 Author #57 Posted August 18, 2017 (edited) PeaceFinish a railing and a little addition . Edited August 18, 2017 by rony coxswain and src 2
rony Posted August 19, 2017 Author #58 Posted August 19, 2017 (edited) I built the part of 4 rods that I glued together. And then polished to the appropriate thickness. Edited August 19, 2017 by rony coxswain and BLACK VIKING 2
src Posted August 19, 2017 #60 Posted August 19, 2017 The wood looks so much better than the cast metal Rony. Are you going to add a pin to the bottom when you glue your parts down? Sam Current Build Constructo Enterprise
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now