Jump to content

Taurus by Havelock - Model Shipways - Scale 1:64 - Steam Towboat


Recommended Posts

I initially purchased Model Shipway's 18th Century Longboat as my first wood boat project and, shortly after, this kit as an alternate starter. The longboat proved to be more advanced than I'm comfortable with so I've put it on hold till I get more experience and confidence. I replaced the longboat with OcCre's Polaris kit that's specifically designed for first time builders and am currently about halfway through that build but have decided to start building this towboat in parallel.

 

There is only one other build log of this kit that I can find at present:  Taurus Steam Towboat by Duanelaker

 

Here is the kit... minus the solid wood hull I managed to leave out of the shot 😕  :

 

1200_2008_IMG_9133.jpg.550be819cd12efc6511245f311546ca0.jpg

 

Be aware that the cabins have been changed from solid wood to a new laser cut version. The build manual is still the original, with instructions for the solid wood cabins, however there is a separate sheet with instructions for the new laser-cut ones.

 

First step is getting the roughly hewn solid hull into shape.

 

The stern was relatively easy:

 

600_2008_IMG_0962.jpg.e93c91198ec52b4466b8a05d68ddd8a9.jpg

 

600_2008_IMG_0963.jpg.b8c222fe01574aaa5dc05e3616f50dd9.jpg

 

600_2008_IMG_0965.jpg.8c00ed43256a9bf9cc56ab5c0d087f88.jpg

 

 

However, the bulwark needs to be thinned down from 1/8" to between 1/32" and 1/16". I created a makeshift scribe using a #11 blade and a clamp with thin wood strips:

 

600_2008_IMG_0968.jpg.9047ad74dccb23333ae40ecef79d211c.jpg 

 

600_2008_IMG_0969.jpg.d6ac7dd8e6769a4a97011a77224c6918.jpg

 

This worked out pretty well:

 

600_2008_IMG_0971.jpg.9291f14aad0e09736b5d43e4a58e8c3e.jpg

 

Was then able to hack away with the x-acto:

 

600_2008_IMG_0972.jpg.75c7b61d794ded6a1a580ea1ed347df6.jpg

 

To get down to about 1/16":

 

600_2008_IMG_0974.jpg.a6acf30fec1494c8893796526d191a5d.jpg

 

Still a lot of sanding and cutting left to do.

 

However.... one mistake I managed to make was not shaping the bow prior to thinning the bulwark. On my hull the bow required a lot of sanding if I wanted to get the "Catboat" stem look (fig. 2c in the manual) which I did want. However because I have already defined the bulwark it wasn't possible to sand back the top of the bow as much as was needed so I was forced to go with fig. 2a. Not the end of the world but annoying all the same.

 

600_2008_IMG_0980.jpg.c12af441273035c739126ea77d241141.jpg

 

 

User: Havelock

Build Logs -> Current: Taurus-MS-1:64  -> Completed: Polaris-OcCre-1:50

Stash:  18th Century Longboat-MS-1:48

 

Link to comment
Share on other sites

 

Trying to get some ideas on a paint scheme and possible modifications so went browsing around google images. Thought I would post a few examples here:

 

tug1.jpg.f0a97b177dc144eec2451542edc343e0.jpgtug2.jpg.2de5f6a3dfb9fb16b2f067f5e0f31989.jpg

tug3.jpg.baef9fe54a4abebb5e612e4994ca3686.jpgtug4.jpg.eeb83c9910e83ba7bf69ab9e7a277074.jpg

tug6.gif.cb2f2b5bb4d387a4b392e617054576d5.giftub9.jpg.e5e4dae3061a0664212559432bcbd8d7.jpg

 

If I ever do a scratch build I think it will be one of these kinds of tugboats. 

User: Havelock

Build Logs -> Current: Taurus-MS-1:64  -> Completed: Polaris-OcCre-1:50

Stash:  18th Century Longboat-MS-1:48

 

Link to comment
Share on other sites

Thanks, John. It's coming along.

 

Not too happy with the fit of the stern grating:

 

600_2008_IMG_0983.jpg.01602e5c5806fdab97195c38f72c033e.jpg

 

Decided to try shape it better with the sander:

 

600_2008_IMG_0984.jpg.1d7f6c5cf6590683b39f67dedca69861.jpg

 

A little better and at least it doesn't overhang the step at the stern:

 

600_2008_IMG_0985.jpg.3a2afa86964251ed5166b6535827b11d.jpg600_2008_IMG_0990.jpg.e1e3329c319ec81106b239fa773b1471.jpg

 

 

For the bow stem I wanted something that looked more like the figures in the instructions, so I took a larger plank from the Polaris kit and made a slot for it to fit into:

 

600_2008_IMG_0993.jpg.3fe7ffba07376031ca0196c11e0eaccd.jpg600_2008_IMG_0994.jpg.da6944b5f1a2ad70632198c5b3c9ff96.jpg

 

And shaped the plank accordingly:

 

600_2008_IMG_0995.jpg.72ed922f44d7fd31dc1a28f0dd94e54a.jpg

 

Not going to install it till I'm adding the rubbing strakes as I'm sure I'm going to break it off while still sanding the hull.

 

Which brings us to what I did all today... sanding, and lots of it, to get the deck ready, the bulwarks thinned, the bow point finished and the main cabin shaped for the deck and roof. Also got the decking cut out and treated with wipe-on-poly:

 

600_2008_IMG_0997.jpg.9f27958be4c29aa3498ad4a0e7e94d20.jpg600_2008_IMG_0998.jpg.63da63313e12a8a84aff8ca037b2b62d.jpg

600_2008_IMG_1006.jpg.32da3cca51eb2e48d6618bf0efd2ce36.jpg600_2008_IMG_1012.jpg.4e9c535ff24989fe880537fa36d9e30e.jpg

600_2008_IMG_1020.jpg.e8a865a38c4c0dbb2fda26186e841eb8.jpg600_2008_IMG_1018.jpg.4bf2532c19cbb53ab7d3b60bedf24d45.jpg

600_2008_IMG_1021.jpg.09e00a4a3a571df4404675b202156d99.jpg

 

 

Of course I managed to over do it with the bulwark thinning:

 

600_2008_IMG_1015.jpg.d8b8f946e1362887e5aebfea972c0a39.jpg

 

Not the end of the world. Can fix it with a little wood filler and the rubbing strake will be along that line.

 

Moving forward I have to plan the next few steps. The instructions are a little too brief and I need to figure out a proper construction and painting order. For example, I don't want to install the deck until I finish painting the hull, as I'm going to be airbrushing it, and also need to figure out exactly how I want the main cabin to look. 

 

User: Havelock

Build Logs -> Current: Taurus-MS-1:64  -> Completed: Polaris-OcCre-1:50

Stash:  18th Century Longboat-MS-1:48

 

Link to comment
Share on other sites

Went out to buy beeswax...

 

600_2008_IMG_1033.jpg.a95ba5d261d4f79f095090662bd00d70.jpg

 

came back with wood strips and brass rods too. Thought it might be good to have an assortment of materials on hand. Oh also got a miter box and ordered an X-Y table for my new drill press.... hmmm, seems half the fun of hobbies is acquiring stuff... 😬

User: Havelock

Build Logs -> Current: Taurus-MS-1:64  -> Completed: Polaris-OcCre-1:50

Stash:  18th Century Longboat-MS-1:48

 

Link to comment
Share on other sites

Nice application of problem-solving skills so far, as John says that's half the fun. Of course, the other half is inventing new words when you discover your next problem to solve!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...