VTHokiEE Posted May 17, 2023 #1 Posted May 17, 2023 (edited) Spoken for. I picked up a Brig Niagra kit on here for the price of shipping several years ago and I don’t envision getting around to it. I’d like to extend the same offer I took advantage of to someone else. Of course if you have an Ancre monograph that you aren’t using, or the Speedwell books from Seawatch I’d gladly pay shipping (within the US) in trade 😁. Edited May 18, 2023 by VTHokiEE Canute, goatfarmer11, GrandpaPhil and 1 other 4 Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG)
mtdoramike Posted May 18, 2023 #2 Posted May 18, 2023 what is the shipping to 32757? I would be willing accept it. mike Canute 1
VTHokiEE Posted May 18, 2023 Author #3 Posted May 18, 2023 25 minutes ago, mtdoramike said: what is the shipping to 32757? Sent you a PM Canute 1 Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG)
42rocker Posted May 19, 2023 #4 Posted May 19, 2023 Seems there are several of us Florida folks on this site. Nice to also see the sharing. Later Tim mtdoramike, VTHokiEE and mtaylor 3 Current Build -- Finishing a 1:1 House that I've been building for a while Current Build -- Triton Cross Section
42rocker Posted May 19, 2023 #5 Posted May 19, 2023 Should have also added I would like to be 2nd in line if things don't work out. 34667. Later Tim mtaylor and mtdoramike 2 Current Build -- Finishing a 1:1 House that I've been building for a while Current Build -- Triton Cross Section
VTHokiEE Posted May 19, 2023 Author #6 Posted May 19, 2023 Sorry @42rocker I mailed it out tomorrow. There are more than a handful of Floridians, sadly its such a big state it seems that many people are spread apart though. mtaylor 1 Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG)
42rocker Posted May 19, 2023 #7 Posted May 19, 2023 It's ok. Used to be several ship modeling clubs in the Tampa Bay area. As I have been trying to stay home and get a lot of stuff done, I have not kept track. To many 1 to 1 scale things to get done also. Need to go cut some 1/2" thick Cherry for frames for a cross section I'm working on. After a few other projects that is. LOL That was a NICE Share by the way! Good of You! Later Tim mtaylor 1 Current Build -- Finishing a 1:1 House that I've been building for a while Current Build -- Triton Cross Section
Recommended Posts