druxey Posted June 27 Share #61 Posted June 27 Well done indeed, Matt. A very nice first model. Now you can build on your experience and skills. MBerg 1 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
dvm27 Posted June 27 Share #62 Posted June 27 A first model you can be very proud of Matt! MBerg 1 Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752 Link to comment Share on other sites More sharing options...
robert952 Posted June 27 Share #63 Posted June 27 Nice looking model. Hope when I get around to the one in my stash, it looks this good. As FYI, you may want to look at Chesapeake Light Craft (www.clcboats.com). They have a lot of kits you can build including a pram or they sell plans only. Cost of plans only seem reasonable to me. But then I am not in the market to build a prototype. At least it's a starting point when you start looking to build your own. I did use information on this site when researching my peapod. There videos and such pointed me in a direction for additional research. I forked over three bucks for study plans of their peapod. They have a few 'build logs' for some of the boats, too. MBerg 1 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?) Link to comment Share on other sites More sharing options...
MBerg Posted June 28 Author Share #64 Posted June 28 23 hours ago, JacquesCousteau said: Is the base just the basswood that came with the kit? What stain did you use with it? Yes, just the kit basswood. I used mixwax dark walnut, one of their regular oil based stains. I realized the combo kit I had from ME with the dory, pram and smack came with some satin clear coat. So I put a couple coats of that on top to seal it. I didn't really have anything else, and tung oil is the only thing I've used before. robert952 and JacquesCousteau 2 Quote On the slip: Norwegian sailing pram On the drafting table: OcCre Polaris Muscongus Bay lobster smack Completed: Lowell Grand Banks Dory Link to comment Share on other sites More sharing options...
MBerg Posted June 28 Author Share #65 Posted June 28 Thank you for all the comments! robert952 1 Quote On the slip: Norwegian sailing pram On the drafting table: OcCre Polaris Muscongus Bay lobster smack Completed: Lowell Grand Banks Dory Link to comment Share on other sites More sharing options...
MBerg Posted June 28 Author Share #66 Posted June 28 6 hours ago, robert952 said: Chesapeake Light Craft (www.clcboats.com). They have a lot of kits you can build including a pram or they sell plans only Oh wow, that looks like a nice resource. Thank you. Can't get much for three dollars anymore. Boat plans sounds like a good deal! robert952 1 Quote On the slip: Norwegian sailing pram On the drafting table: OcCre Polaris Muscongus Bay lobster smack Completed: Lowell Grand Banks Dory Link to comment Share on other sites More sharing options...
MajorChaos Posted June 28 Share #67 Posted June 28 It looks great! Great job! robert952 and MBerg 2 Quote In the shipyard: Syren 1:24 Medway Longboat 1742 Model Shipways 1:64 Bluenose Model Shipways 18th Century Longboat OcCre 1:50 The Flying Dutchman Completed: Model Shipways Lowell Grand Banks Dory Model Shipways Norwegian Sailing Pram Model Shipways Muscongus Bay Lobster Smack Link to comment Share on other sites More sharing options...
robert952 Posted June 28 Share #68 Posted June 28 12 hours ago, MBerg said: Oh wow, that looks like a nice resource. Thank you. Can't get much for three dollars anymore. Boat plans sounds like a good deal! To be clear, the $3 was for the 'study plans' a single sheet showing general shape and layout. Plans for the actual boats cost quite a bit more. But as you say, seem reasonable. Ryland Craze and MBerg 2 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?) Link to comment Share on other sites More sharing options...
SiriusVoyager Posted June 30 Share #69 Posted June 30 That is a great looking Dory you got there! Can't wait to see the start of the Pram. MBerg and robert952 2 Quote - Eric Drafting: Sultan Arab Dhow Finished: Norwegian Sailing Pram, Lowell Grand Banks Dory, Muscongus bay lobster smack, OcCre Palamos, San Francisco Cross Section Link to comment Share on other sites More sharing options...
aaronc Posted July 11 Share #70 Posted July 11 Strong work on the build,..I plan to stain my base as well. Well done Sir. MBerg 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.