Apostol Felipe by Slowhand - OcCre - 1:60 - Spanish Galleon

[Slowhand]

After a few weeks with my new Proxxon Table saw toy, I am confused about the mitre ruler and fence. There doesn’t appear to be an easy way to cut a length a distance of 10mm from the blade. Positioning the fence at the 0mm mark on the ruler doesn’t place the fence right next to the blade, even adjusting the sub mm knob. I suppose I can use a steel ruler to place the fence 10mm from the centre of the blade but it makes the fine adjustment thumb wheel a bit of a gimmick. Stop press - changed blade to a 0.5mm kerf and fence is much closer to blade when at zero position. 😄😄

 

Awaiting digital callipers as ageing eyesight makes viewing the gauge harder and specs add distortion. Going old is great 😢😢

Edited March 17 by Slowhand
Photo added more text

[Slowhand]

Finished the planking above the wales, but looked too light, I had tested samples of African walnut with a coloured Danish Oil and it looked perfect just about dark enough. Coating the ship with this oil and what a disappointment every blemish, wood glue stain was revealed. Lightly sanded down and reapplying no better, tried staining with medium oak no better. Everything had to come off, continuing without being happy with the hull would be a killer. Looking at my San Martin, covering with mahogany and finishing with diluted poly u varnish has aged well so that’s what I did. Going for the chunky finish using the grain and the texture of the planking to give an old galleon look. Looking on the bright side I can remove planking on hulls and decks quite easily and redo.

 

Edited 8 hours ago by Slowhand
New image

[MikkiC]

Very nice. Shows off your clean planking work.