d'brat Posted February 9, 2014 Share #1 Posted February 9, 2014 After months of lurking it's time to jump in. My lovely bride gave me this model for my birthday even though I had not gotten very far on the one she had given me the prior year (HMS Supply/1788 aldo AL). Posting progress here will, hopefully, keep me from being sidetracked so often onto other projects. Two instruction manuals - 56 pages (in 7 languages) for the hull and a large format, 22 page one for the masts and rigging. Too bad I can't read all 7 languages to see if they are different. trippwj 1 Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
d'brat Posted February 9, 2014 Author Share #2 Posted February 9, 2014 Can't judge to quality of the wood until I start the build but the contents of the box along with the detail of the fittings seems to be very complete for an intermediate level kit. It looks like there is a slight bend to the backbone but an assembly jig will set that straight through framing and decking. Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
jre8655 Posted February 9, 2014 Share #3 Posted February 9, 2014 Welcome aboard! I literally just finished a 1:100 scale model of the Bluenose by Model Shipways. Speaking from the experience I had with that model I'm sure you're going to enjoy building the Bluenose II. I look forward to following your build. Jack Quote Jack Builds: Bluenose (Model Shipways 1:100) Cutty Sark (Mini Mamoli) Mayflower (Model Shipways) Queen Anne's Revenge Ghostbusters Proton Pack Link to comment Share on other sites More sharing options...
jbford Posted February 9, 2014 Share #4 Posted February 9, 2014 (edited) i have one waiting to be built. yes, it does look like a nice kit. please don't just publish the end results, the glitches encountered and info on how you get past them will be of great interest! Edited February 9, 2014 by jbford Quote Link to comment Share on other sites More sharing options...
ChrisWhy1967 Posted February 11, 2014 Share #5 Posted February 11, 2014 Those instruction look a bit more informative compared to the 1:100 billing Kit, and I can see a prop shaft in that kit of yours, Quote Link to comment Share on other sites More sharing options...
d'brat Posted February 11, 2014 Author Share #6 Posted February 11, 2014 The actual Bluenose II is the replica built in 1963 of the original 1921 Bluenose so the II kit has all of the updates that are on the new version including double propshafts and different deck fittings. I was planning on leaving off the shafts and props since they look out of place on the sleek hull. I may also change fittings to look closer to the original schooner to my untrained eye. Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
jre8655 Posted February 12, 2014 Share #7 Posted February 12, 2014 I believe that the props, as well as other details, have been built into the Bluenose II because of U.S. Coast Guard Regulations. These had to be added in order to receive a seaworthy certification. It's the same situation I saw with the San Salvador that the San Diego Maritime Museum is building. They had to add all the updates to have it certified. I would think that with some kit bashing you could make it look more like the original Bluenose if that's your intention. Quote Jack Builds: Bluenose (Model Shipways 1:100) Cutty Sark (Mini Mamoli) Mayflower (Model Shipways) Queen Anne's Revenge Ghostbusters Proton Pack Link to comment Share on other sites More sharing options...
d'brat Posted February 12, 2014 Author Share #8 Posted February 12, 2014 This site has many photos of the original schooner taken in 1940 during its declining years. After I finish building the hull these shots will help me decide what to change on the kit of the II. Or, more likely, if my modeling skills have declined too much I will just have to work with what I have in the box. http://novascotia.ca/nsarm/virtual/bluenose/ Sorry if this has shown up on someone's build log before but I'm still a newbie at this. Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
jre8655 Posted February 13, 2014 Share #9 Posted February 13, 2014 That particular site provided me with a great deal of information when I built my Bluenose. I used every photo to help augment the kit and add various parts that were not in the kit or instructions. Get all the photos you can. Quote Jack Builds: Bluenose (Model Shipways 1:100) Cutty Sark (Mini Mamoli) Mayflower (Model Shipways) Queen Anne's Revenge Ghostbusters Proton Pack Link to comment Share on other sites More sharing options...
Poppi Posted February 14, 2014 Share #10 Posted February 14, 2014 Hey d'brat... I too am currently building the Bluenose (original 1921). It's my first build and will post a build log soon. So far the keel and bulkheads are complete and I will be planking shortly. Started before I found this forum. Kit is a Model Shipway's and online it was shown as Bluenose II, however, the kit I received was the orginal. Which actually I prefer. It is 1:64 scale. Will look in on your progress from time to time. Good luck! Poppi Quote Link to comment Share on other sites More sharing options...
d'brat Posted February 15, 2014 Author Share #11 Posted February 15, 2014 After reading the manuals a few times I finally started on the actual assembly. The laser cut framing was very cleanly done and only took a few pushes with the knife to cut the little tabs that held the pieces to the large sheet. I particularly like that every piece is numbered and the false keel is numbered where each piece goes. That makes assembly almost foolproof. We'll see how far "almost" goes in the future. The central false keep does have a curve in it but does not seem to have a twist. That piece was both curved and twisted on my HMS Supply kit so I built up a little support from scrap MDF to hold it straight during frame and deck gluing and the initial planking. When the pieces are dry-fitted the curve is still there so I think i will make up another holder before I start gluing. The other Bluenose logs on the site are not the Artesania Latina versions but I will be going over them as I plod along and read everyone's helpful suggestions. If I come across anything that seems unique to the AL kit I will call for help Now off to work on the weekend honey-do list. Dimitris71 1 Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
Pnorval Posted February 16, 2014 Share #12 Posted February 16, 2014 Looking good.... I do like the instructions... Loads better than Billings Quote Link to comment Share on other sites More sharing options...
Dimitris71 Posted April 28, 2014 Share #13 Posted April 28, 2014 Hello d'brat , i think you 'll enjoy the construction of the particular kit. I'm finishing the same kit so if you need anything ,let me know. Take care . Dimitris Quote Current Build: Amerigo Vespucci -Mantua- 1:100 scale Completed Build logs: Bluenose II AL 1:75 scale Gallery: Bluenose II AL 1:75 scale Future Build: Royal Caroline -Panart- 1:47 scale Link to comment Share on other sites More sharing options...
d'brat Posted April 28, 2014 Author Share #14 Posted April 28, 2014 Thank you. Your build looks great. I have not been able to work on my for a while but hope to be back at the "shipyard" soon. I'm sure I will have a lot of questions then. One questions that I already have is how you tapered the bow before planking. Did you shape it to a vee first then planked it and then squared it off to glue on the final stem piece or did you glue the stem piece on before planking and then notched it to accept the planks? Not sure if I'm describing it clearly but I know the instructions do not cover that. Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
Dimitris71 Posted April 28, 2014 Share #15 Posted April 28, 2014 Thank you. Your build looks great. I have not been able to work on my for a while but hope to be back at the "shipyard" soon. I'm sure I will have a lot of questions then. One questions that I already have is how you tapered the bow before planking. Did you shape it to a vee first then planked it and then squared it off to glue on the final stem piece or did you glue the stem piece on before planking and then notched it to accept the planks? Not sure if I'm describing it clearly but I know the instructions do not cover that. Hello again d'brat . First i shaped it to a vee then planked and finally glued it. I assume you refer to the bow and stern decks.i hope my answer helps , if i did not understand your question please do not hesitate to ask me again. I will send you 2 or three pics of the process . Dimitris Quote Current Build: Amerigo Vespucci -Mantua- 1:100 scale Completed Build logs: Bluenose II AL 1:75 scale Gallery: Bluenose II AL 1:75 scale Future Build: Royal Caroline -Panart- 1:47 scale Link to comment Share on other sites More sharing options...
cwboland Posted April 29, 2014 Share #16 Posted April 29, 2014 Hello d'brat. You may want to count your deadeyes. I just (almost) finished the AL Bluenose II but am still waiting for the deadeyes to arrive as the kit came up short by almost half. Count both sizes and make sure you have enough to do all the ratlines and other rigging. Cheers Quote Carl Completed builds: AL Bluenose II 1:75 Gallery Amati Hannah SIB 1:300 Gallery Current Build: Bluenose II - SIB - unknown scale Link to comment Share on other sites More sharing options...
d'brat Posted April 29, 2014 Author Share #17 Posted April 29, 2014 Thank you for the reminder. I did not do a full count of the little bits even though I knew that I should. I've not been building for a couple of months but I will definitely do the count when I get back to it (hopefully) soon. When you were short where did you order the replacements? My kit came from a local hobby shop so I don't have a mail-order distributor to use. Quote D'Brat Current Build - Bluenose II - AL In the wings - HMS Supply - AL Link to comment Share on other sites More sharing options...
cwboland Posted April 29, 2014 Share #18 Posted April 29, 2014 I'm still waiting for the parts from Great Hobbies out of PEI Canada as their supplier is currently back ordered. You should be able to get the right size deadeyes from your hobby shop or from any online hobby retailer. I found both 3 and 5mm deadeyes online Quote Carl Completed builds: AL Bluenose II 1:75 Gallery Amati Hannah SIB 1:300 Gallery Current Build: Bluenose II - SIB - unknown scale Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.