FKarl Posted May 28, 2014 #1 Posted May 28, 2014 Not a build log. Just wanted to share.... I've seen many versions of this where folks just paint the railing without removing the plastic between the rails. I've seen also the photo tech route taken. What I've discovered just today is that with a small bit used as a saw in my pin vise, I can remove that material. Tedious for sure but I think it'll make a difference. I'm just hoping it cleans up with some 600 grit paper. I'll post the result after I get a few done. Just wanted to share the idea. mtaylor, WackoWolf, hexnut and 1 other 4
hexnut Posted June 4, 2014 #2 Posted June 4, 2014 I'd love to see pictures. I started one years ago, removed all of the railings to go the photoetch route, but it's been sitting on the shelf unfinished for a long time... Regards, Bob Marvin Muscongus bay Lobster Smack -Midwest- 1:24- (1st wooden build) Gertrude L. Thebaud Mini-Mamoli 1/200 kitbash
FKarl Posted August 2, 2014 Author #4 Posted August 2, 2014 railings were more tedious than I thought. only did one side..... broke a few in the "sawing process" although it worked fairly well and is a technique I will use in the future I am sure. been working along pretty steadily and just about finished. I tried my hand at weathering (deck) and need more practice for sure.... overall I am pleased with my efforts though. Decals and "optional" rigging still to go... here are a couple progress photos. The railing got sanded as best as I could but I wish it had come out better. one question. I was unable to find exactly how they retrieved the planes? I know with the crane... but exactly how did they "hook up"? I cant imagine they put anyone over the rail to use cables and hooks. Stymied. dgbot, hexnut and ScottRC 3
FKarl Posted August 2, 2014 Author #5 Posted August 2, 2014 The, "not quite finished" photo. I suck at decals..... dread them in fact. any pointers before I try not to botch them too badly? WackoWolf and hexnut 2
bushman32 Posted August 3, 2014 #6 Posted August 3, 2014 Brush a little glosscote where the decals will go, and of course let it dry. Since this will give the area a smooth surface it will be easier to position the decals. Some people say to put decal set on the model before placing the decal. I found that the decal set limits your time to get the decal positioned properly. So I use a lot of water. After positioning and drying up excess water I then use setting solution. After all is dry, give a clear coat to seal it in. Ron W. Ron W.
reklein Posted August 5, 2014 #7 Posted August 5, 2014 To retreive the planes,,they drug a mat in the water onto which the plane would taxi. Once the speed matched the ship a hook was lowered and the observer would climb up, catch a hook,attach it to the plane and then they were lifted aboard. Theres a little video of this just recently but I forgot where it is. Bill hexnut and FKarl 2 Bill, in Idaho Completed Mamoli Halifax and Billings Viking ship in 2015 Next Model Shipways Syren
FKarl Posted August 6, 2014 Author #8 Posted August 6, 2014 still learning the techniquies you all speak of here. I am happy enough with the result for such a small scale but aim to do better on whatever is next. Thanks for the tips on decals. I hope to have time to get the needed supplies this weekend. More photos as requested. WackoWolf and hexnut 2
FKarl Posted August 12, 2014 Author #9 Posted August 12, 2014 To retreive the planes,,they drug a mat in the water onto which the plane would taxi. Once the speed matched the ship a hook was lowered and the observer would climb up, catch a hook,attach it to the plane and then they were lifted aboard. Theres a little video of this just recently but I forgot where it is. Bill You've no idea how long i've looked for this info!!! So, youre saying the pilot would get up and attach the hook afterward? One hook? what did it hook up to? Just a big D ring on the fuselage? ANychance you nmight steer me towards that video?
reklein Posted August 13, 2014 #10 Posted August 13, 2014 FKarl, I've looked for "bout 45 min fro this video and can't find it in MSW. The video showed the o server climbing out to catch the hook while the plane was up on the mat. You might try a general Google or Bing search. Sorry. Bill Bill, in Idaho Completed Mamoli Halifax and Billings Viking ship in 2015 Next Model Shipways Syren
hexnut Posted August 13, 2014 #11 Posted August 13, 2014 (edited) Here's a video of the USS Chester making a sled recovery of an OS2U: http://www.criticalpast.com/video/65675069341_OS2U-Kingfisher_USS-Chester_recovery-sled_hoisted-aboard_pilot-in-a-cockpit A bigger version of same video: http://www.youtube.com/watch?v=ObsHmDgvMak Edited August 13, 2014 by hexnut FKarl 1 Regards, Bob Marvin Muscongus bay Lobster Smack -Midwest- 1:24- (1st wooden build) Gertrude L. Thebaud Mini-Mamoli 1/200 kitbash
reklein Posted August 13, 2014 #12 Posted August 13, 2014 Thanks hex nut. I could only find explanations and stills on Bing. Bill Bill, in Idaho Completed Mamoli Halifax and Billings Viking ship in 2015 Next Model Shipways Syren
FKarl Posted August 21, 2014 Author #13 Posted August 21, 2014 Awesome! Thank you!! No OSHA back then! hexnut 1
hexnut Posted August 23, 2014 #14 Posted August 23, 2014 No OSHA back then! Man, that is a fact. Review committees complain about how long new military (and civilian) hardware takes to develop nowadays, but the reality is, we are much more concerned now about preserving the fragile, squishy humans working with this equipment... Regards, Bob Marvin Muscongus bay Lobster Smack -Midwest- 1:24- (1st wooden build) Gertrude L. Thebaud Mini-Mamoli 1/200 kitbash
meatloaf109 Posted November 16, 2014 #15 Posted November 16, 2014 I do know that the Kingfisher aircraft used later on had the pilot attach the sling, as it was on the rear of the pilots cockpit.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now