Search the Community
Showing results for tags 'Rope'.
-
Rope and cable - various sizes Ropes of Scale Check website for specific price/size Afternoon all, Ben from Ropes of Scale recently sent me a package of samples from his synthetic range of rope, and also a couple of of his rope-laid cables. Shipping from Canada took around 2 weeks, which I don't think is too bad in this current climate, and the pack came in a thick, protective Jiffy-bag, unmolested by the ravages of the various postal services involved! Inside the pack were samples of rope in the following sizes: 0.25mm (0.009") x 6 metres 0.35mm (0.013") x 6 metres 0.45mm (0.017") x 6 metres 0.5mm (0.019") x 6 metres 0.6mm (0.023") x 6 metres 0.7mm (0.027") x 6 metres 0.8mm (0.031") x 6 metres 0.9mm (0.035") x 6 metres 1.0mm (0.039") x 6 metres 1.1mm (0.043") x 6 metres 1.2mm (0.047") x 6 metres These sizes were all individually bagged into zip-lock wallets and supplied in nicely wrapped loops with a 'Ropes of Scale' label applied to stop the loops unravelling. All of the above sizes were supplied in Tan, Light Beige, Dark Brown, and Black. As well as the supplied sizes, Ropes of Scale also creates these in 1.3mm thru to 1.8mm, currently. Also included in the pack were two samples of cable-laid rope. These are: 2.6mm (0.102") x 2 metres - Tan 1.7mm (0.066") x 2 metres - Black All rope is right-hand laid (left-hand laid is denoted by an 'L' on the label), and very much covers the bases that a modeller would need for colour options. These cables are synthetic, although you can get them in cotton. For these synthetic ropes, Ropes of Scale use Gutermann E thread which is totally free from any of that annoying fuzz that sometimes accompanies the rigging process. According to their website, the ropes are also been heat treated to stop it unravelling when cut, although they do still note that a little CA on a rope end may be needed to thread them through your favourite rigging blocks. Tan The colours tend to cover all the required bases with two options for both running and standing rig. When it comes to standing rig, I would personally lean towards the dark brown as it perhaps more closely represents a tarred line than black, but many folk still prefer black, so that option is also there for you. Light Beige Dark Brown Perhaps the best solution for representing tarred standing rig. Black Probably the favourite and most widely used colour for standing rig. Rope-laid Cable These are supplied here in 2m lengths. I've been using some Gutermann rigging cord over the last year or so with my work on Vanguard Models' kits, and I have to say that I very much favour the brand as it's trouble-free when in use and doesn't have the common tendency to snag while working either, so these will be an absolute joy to work with. Manipulating the rope also doesn't result in the threads separating too. This is the first professional grade of rope that I've experienced in this format, and I have to say that I do like it very much indeed. I can also tell you that the forthcoming 1:64 HMS Indefatigable kit from Vanguard Models, will also feature hawse/cable and mast stays supplied by Ropes of Scale, so that is a very exciting development! Ropes of Scale are a sponsor of Model Ship World. If you're in need of some amazing quality, fuzz-free rope that is going to have the exact scale fidelity you require for your build, you certainly won't go wrong with any of Ben's products. They are doubtless made with passion and dedication, and you can clearly see his attention to detail in every single packet.
-
Rope and rigging blocks - various sizes Syren Model Ship Company Available from Syren I had a little package arrive from across the pond last week, from Syren. This bubble pack envelope took just six days to land with me in the UK, which is quite astonishing as regular post items from the US can usually take over two weeks, if lucky. This pack contains both rope and blocks from Syren's new range - Ultra Scale Rope and Boxwood Blocks. Ultra Scale Rope These ropes are poly-cotton and tightly laid, yet remain beautifully supple to handle. You also won't have any problems with kinks etc. I've had a play with both the thickest and thinnest of these and absolutely love them. The colour of all these samples is tan, which is suitable for all of your running rig requirements and the shade looks great for this purpose. These are all delightfully fuzz-free too. I hate fuzzy line as it really zaps enthusiasm in the latter stages of a project, so if you are in need of replacing your kit ropes, then this is ideal. Syren also produce these in dark brown to represent Stockholm tar for standing rig. Each pack, except the 2mm and 2.4mm, contains 20' of rope, which equates to around 6.1 metres in metric. Those thicker ones contain 9' (2.7 metres). Here are the photos of each packet, complete with a close-up of the rope so you can see the quality for yourself: Boxwood Blocks Syren's boxwood blocks are a very nice, milky brown colour and consistent throughout each pack I've been sent. All blocks are CNC-produced and Syren also supply blocks in pear. Again, these are made using the same production method and look great. All of these close-up pics are via my iPhone so please excuse any problems with definition. Syren can also produce blocks in black hornbeam to simulate tarring etc. These are some samples that Chuck put in the packet. It's so difficult to photograph black on white so I hope these look ok to you. In reality, they are beautiful rigging blocks and I will definitely find a use for these eventually. We have some wonderful vendors who support MSW, with Syren being one of them. If you are in the market for any of these products, then them out and tell them you saw this topic here on MSW. If you check out their web page, you'll see that other types of blocks are available as well as the singles and doubles you see here, such as open and closed hearts, fiddles, and internally strapped single sheave bocks. A few of these products are assembly type, but all produced from the same grade of boxwood you see here. Sincere thanks to Syren for the sample packs you see here on MSW.
-
Hi everyone With me getting more and more into this hobby i find myself not liking the ropes that usually come with the kits. Thats why i have been looking into purchasing one of Domanoff's rope walking machines. My only question, if anyone in here already has one, is: do they already sell the strands in those spools, or do we need to rewind them in the same ones that come with the machine? Also if anyone has any photos of how do the finished product look using those machines, i would gladly like to see them! Thank you very much
-
On my last 2 scratch build ships I have guessed the thickness of the different types of rope used. Now that I am working on the Fluit, the Zeehaen, I think that guesstimating the thickness of rope is out of the question. Is there a formula one uses to figure out how the thickness of rope is calculated? For example : x = scale of the ship y = real size of the ship z = thickness of rope Taking in account the year and nationality of the ship (1639, Dutch), or this does not matter? I know the scale is important which for the Zeehaen is 1:37.5. Thank you in advance. Marcus
-
Hi everyone! After making a few kits myself, i found out that the ropes that come with the kits usually are not as good as i would want them. I have researched a bit and found out about ropewalks, even found the Domanoff PL4 and Prosak. Still, i dont have the money right now, and i would like to make a ropewalk myself. I have looked into it and found this post: Which is exactly what i was looking for. However, i have seen other designs in which the moving part also twists the rope in the oposite side. My question is, if anyone has tried both, is it worth it to add a motor to the other side? Thank you all
-
Hello, I'm 3D modelling the Black Pearl and I'm struggling to find any good reference on how the masts are supposed to be rigged. Any help would be greatly appreciated
-
Dear all Having spend a lot of time making rope I d like to share my experience. I ve made many rope sizes using all of DMC range as well as a few others. This is what I came up with. Left Twist: Petra, Perle Right Twist: Cebelia, Babylo, Cordonnet, Mara one ball Cordonnet 40 makes about 22 m of rope DMC Petra 3, 1x3---1.46 mm Petra 5, 1x3---1.18 mm Petra 8, 1x3---0.88 mm Petra 8, 2x3---1.25 mm Cebelia 10, 1x3---1.06 mm Cebelia 10, (1x3)x3, 2 mm Babylo 40, 2x3---0.9 mm Perle 5, 3x3---2.1 mm Perle 5, 2x3---1.72 mm Perle 8, 1x3---0.81 mm Perle 8, 2x3---1.25 mm Perle 12, 1x3---0.63 mm Perle 12, 2x3---0.94 mm Cordonnet 20, 1x3---0.61 mm Cordonnet 20, 2x3---1.12 mm Cordonnet 40, 2x3---1.04 mm Cordonnet 60, 2x3---0.87 mm Cordonnet 60, 3x3---1.08 mm Cordonnet 80, 2x3---0.82 mm Cordonnet 100, 2x3---0.7 mm Cotton/linen yarn, 2x3---2.3 mm (too fuzzy) 100% cotton yarn, 2x3---2.3 mm (Too fuzzy) Gutermann Mara 30, 1x3---0.81 mm Mara 30, 2x3---1.06 mm Mara 30, 3x3---1.43 mm Mara 70, 2x3---0.77 mm Mara 70, 3x3---0.94 mm Mara 120, 2x3---0.56 mm Various Linen 40/2, 1x3---0.66 (Irregular, bad rope) Dual Duty XP, 4x3---1.6 mm (bad rope) Dual Duty plus, (1x3)x3, 1.6 mm (bad rope) Cottolin 22/2, 3x3---1.9 mm (quite fuzzy) This is how 230 m of scale rope looks like!
-
I am fortunate enough to live in a Coastal Community where I can walk the docks, and look at different types of ships and small vessels. We also have a extensive Marine Retail Store dedicated to Commercial Fishing located on the Docks. Over the years, I have been buying Nylon Seine Line in various sizes for gardening and other projects. The smallest diameter Seine Line I am aware of is #5, which has a diameter somewhere between 050 and 070 in equivalent Kit lines. See examples below. The Seine Line is stiffer and is much easier to use. When cut, the Seine Line frays less at the cut end than the line provided in the Kits. The #5 Seine Line (Nylon) comes in 1 lbs spools. Which is approximately 3,500 feet at a cost of only $12.99 each. This one spool will last me a lifetime. So far I have only experimented with it. So far I am impressed.
- 16 replies
-
Hi. I have just receved my order of modellng rope. Pleased with the products and service. A few photos says more then a string of text so here are the photos. That' the best with the focus I can get on the camera. www.modellbau-takelgarn.de is the trader I got it from. I have no connection with the above business/Trader. Just someone selling a quality product. It's A lot better than I can made it 🙄 Regards Antony.
-
First, now (2/16/18) on Ebay linen yarn in retail quantity Nm 26/1 = 40 Lea 3 stand layup result at 1:48 = dia. between 0.75-0.9 in. circ. between 2.4-2.8 in. ( I have measured 30/1 and 45/1 yarn) Nm 21/1 = 35 Lea The following are available in wholesale quantities: from Etsy seller StoffGarnConneXion in Schwalmtal, Germany The weight per unit is ~ 1 kg cone shipping to US alone is ~$50 / unit closest result @ 1:48 by my measurement Nm Lea A B C dia. circ. spool 36* 60 62/1 3 0.012 0.6 1.9 $58 30* 50 45/1 3 0.016 0.75 2.4 $75 24* 40 $32 20* 33 30/1 3 0.019 0.9 2.8 $52 12* 20 14/1 3 0.027 1.3 4 $48 10* 17 16/1 3 0.04 1.9 6 $43 15/2 25/2 20/2 3 0.033 1.6 5 $92 A yarn size in lea B # strands turned C actual diameter as measured as rotations per inch on a dowel
-
Hi guys, I was wondering if anyone that has done the Mamoli 1:90 victory and got to the end of the rigging and found they had enough string to complete the job? The more I look at people's builds on here the more I think there isn't gonna be enough string in the kit to do the job... The bag with the different sizes of string that came with my kit looks a little small to me. I haven't opened the bag yet to have a really good look at the strings, but from memory there doesn't look like there will be enough. My question is: Where can I buy some spares from? I would rather have more than enough and use the extra to tie some fancy knots with!!! than get halfway through and run out... I live in the UK, but getting stuff posted from abroad is easy enough. I eagerly await replies with hopefully some good news/tips/advice Till then, Kindest regards Spider
-
I built a rope walk on the MS version to see if rope making is as much fun as it seems. The question is what size thread in a 3-strand lay will yield what size rope? Any help will be greatfully accepted. Thanks
-
Hi, The kit is Mantua/Sergal CS. The kit has metric measurements (not a problem) but for the length it reads like this 0.25 by "60mt". The only time I've seen "mt" used was for metric tons or MT. for mountain. Can anyone help me with this? I had trouble with math in school but that is a different topic. According to a number of resources CS would have flown a "Red Ensign" being a merchantman. The flag supplied is a Union Jack. Any leads for cloth printed small flags would be most welcome. Happy Thanksgiving to all...
-
Hello all, I am new to the wooded model ship building hobby. I have a question for the experts. What type of thread/cord do you use when you make the ropes (as in using a rope walk)? What are the three threads, etc in pictures of rope walks I see?? Many thanks for all the great information and tips. Jabe
-
I'm new to building wooden model ships and I do not want to use a kit. I have build my rope walk but I need to know the different diameters of rope on the USS Constitution, but I can't find that information. Can anyone help, please!!!!
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.