-
Posts
7,326 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by CDW
-
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
Thanks Denis. I am so ready to close up the fuselage and finish this beast. The tri-color US Navy scheme should prove interesting to do. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
Yes, i am using Vallejo chromate green. Yes on the tape, there's just way more than $6 worth of taping on this model, and that's approximately the cost of the masking set if you can find one. I searched hi and low for this set. PS: for some odd reason, the Vallejo chromate green is not easy to find on hobby shop shelves. You can make your own chromate green by mixing Tamiya green with yellow. In hindsight, I would go with Tamiya if I had to do it all over again. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
Just an hour or so after I posted the last photos, the canopy mask set arrived in the mail from England. Because of the complexity of the masking required for this model, the pre cut masking set is a huge benefit for a small cost. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
That's a great idea Roger. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
There's a good sized window on the port side and a door on the starboard side at the bombardier's station that will enable a limited view. Once the turret frame is painted, there will be a limited view from that direction. Will decide whether to use the open canopy at the pilot's area or closed. Leaning toward open right now. Bomb bay doors will be left open. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
The Avenger crew consisted of three men. A bombardier-radioman, turret gunner, and the pilot. The bombardier-radioman sat in a bench seat underneath the turret gun, where a .30 caliber machine gun was mounted pointed to the rear to serve as a ventral defensive armament. The gun turret was electric powered, the gunner having his own seat and a .50 caliber machine gun to help fend off enemy fighters. In order to join and cement the fuselage halves, the turret glass must be installed first as it will not fit after the fuselage halves are joined. Consequently, this will cause a delay as the canopy mask set is inbound from a vendor in England. Because this model was originally produced in 2005, very few aftermarket items can be found for it now. If you find one you're almost forced to buy it even if it must come from across the ocean. I've been checking the fit of the internal details to the fuselage halves as I'm progressing, trying to avoid any unexpected fit issues when the halves go together. So far so good, as everything seems to be very well engineered and fits well. -
Yes, I did in the early 2000's, owned several different helicopters trying to master flight. 99% of the time, there are no "minor" RC helicopter crashes. The slightest rotor blade ground strike does major damage and misalignment of parts that take hours to replace and adjust. Very expensive to repair as well. It's so easy to become disoriented as control becomes completely different when tail out or tail in. Generally, orientation is tail in, as if one were sitting in the cockpit. When the helicopter turns and heads toward you (tail out), control is then reversed so to speak as right becomes left and left becomes right. In addition, it's hard to tell how the tail is oriented once the helicopter gets a couple hundred feet out. Last, an RC model helicopter can hurt you or spectators badly, even death. Those blades turn so fast with so much mass, they can cut you open like a buzz saw.
-
doggone
-
B-25 Mitchell "Meet Miss Runyon" by Javlin-HK-1/32
CDW replied to Javlin's topic in Non-ship/categorised builds
B-25 models in general are notorious tail sitters. Remember the company that used to specialize in nose weights made specifically for certain models? I can't recall the company name, but they made weights in the correct shape to fit perfectly in the nose of your model. I've wondered if they were still in business but I doubt it. Things like that come and go. -
CH-53 Sikorsky by mtaylor - 1:48 - Revell - FINISHED
CDW replied to mtaylor's topic in Non-ship/categorised builds
Guns are very well done. Holy mackerel, that's a HUGE dime! -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
In the middle of my hobby fun, chores around the house have gone front and center. I have some things to take care of that are due, so must spend some days finishing those up before I can return to this big bird. Meanwhile, I'm waiting for a set of canopy masks to arrive from England and paint from New Hampshire. As MacArthur said, I shall return. -
Don't ever assume you're good with a hard drive because they can fail without any notice whatsoever. I learned that lesson the hard way when I lost everything stored on two separate hard drives. 1.5 terabytes in total. I lost pictures, documents and plans I had stored for many years. Only way to give yourself some confidence is to have redundant backup systems including the cloud. Costs money so that's something to keep in mind.
-
Considering how many warbirds Kermit Weeks owns, it's amazing his recall of all the control functions in the Mossie cockpit. And when you watch his videos, you'll notice he has this recall of every aircraft he owns which tells me he gets in a hella lot of flying time as well has having a great memory. These aircraft were fairly complex and each different type had their own peculiarities.
-
OC What color are you going to use for the cockpit area. Do all British WW2 aircraft share the same cockpit color? For US aircraft, it's almost universally zinc chromate green. You can get that color by mixing Tamiya's green and lemon yellow, but they (Tamiya) don't sell a premixed color for zinc chromate. For my current project, I've been using Vallejo Model Air zinc chromate, but recently found out I had bought the only bottle of it in town. If I had known it was that scarce, I would have mixed my own with Tamiya paints. I had to order some Vallejo from another state and am waiting for it to arrive.
-
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
A dry run to see if the cockpit/bomb bay/gunner stations fit correctly into the fuselage halves. So far, so good. There remains the ventral gunner's station and tail wheel compartment before the fuselage halves can be closed up. No doubt, this is the best opportunity to see the internal details as I'm sure much of it will not be seen after the halves are closed. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
Thanks for the kind words Gary, but the Mr Metal Color paints are very easy to use. They excel at dry brushing as they contain very finely ground metal pigments. The more your use your (dry) brush, the metal color pops out. Very similar in some ways to the Testors Metalizer paints that were popular years ago (if you're familiar with those) but better. -
FINISHED - TBM3 Avenger by CDW - Trumpeter - 1:32 scale
CDW replied to CDW's topic in Non-ship/categorised builds
my 3-0 paintbrush and Tamiya yellow
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.