Well here goes, my first build log. The San Martin was the flagship of the King Phillip II 's commander the Duke of Medina Sidonia and is frequently mentioned in "The Defeat of the Spanish Armada" by Garrett Mattingly. It survived the battles and voyage and finally reached Santander after sailing around the north of Scotland and Ireland.
An earlier incomplete build log of this model , with several photographs of the parts in box is shown in
San Martin by Volkerbo - Occre - scale 1: 90 so I won't repeat.
This is my first Occre kit and so far compares favourably with Corel efforts quality wise. The frames and false keel went together easily with only a little easing and first picture shows three of the decks planked, although only the main deck is glued in place which needed clamping it was straight whilst it lies curved. The planks were lightly sanded and given one coat of Danish oil and tree nails added in pencil. For this build I intend to sand, coat with one coat of Danish oil and rub in beeswax at the end. Noted a few oddities in the instructions already, one of which suggests bulkheads planked vertically with mahogany. Never seen this before so will plank horizontally as in many build logs. Also suggested this planking is done before the decks are added which I think would have needed trimming the planked decks. So will fit the decks and then plank the bulk heads.
The only bashing I intend to do is to cut out more gun ports to replace the metal stick on castings. Will try the method used in Half Moon using stub cannons glued into a block fixed to the bulkheads. Aim is for the cannon barrels to protrude from dark shadowy gun ports. If I can't get the planking right around the ports or the effect doesn't look good can always debash the kit.
Now for the fun, I have a decent camera but struggling to get a good lighting and spot in the house.
All comments welcome and I hope its of interest to the members, signing off for now.
San Martin by Slowhand - FINISHED - OcCre - Scale 1:90
in - Kit build logs for subjects built from 1501 - 1750
Posted · Edited by Slowhand
Well here goes, my first build log. The San Martin was the flagship of the King Phillip II 's commander the Duke of Medina Sidonia and is frequently mentioned in "The Defeat of the Spanish Armada" by Garrett Mattingly. It survived the battles and voyage and finally reached Santander after sailing around the north of Scotland and Ireland.
An earlier incomplete build log of this model , with several photographs of the parts in box is shown in
San Martin by Volkerbo - Occre - scale 1: 90 so I won't repeat.
This is my first Occre kit and so far compares favourably with Corel efforts quality wise. The frames and false keel went together easily with only a little easing and first picture shows three of the decks planked, although only the main deck is glued in place which needed clamping it was straight whilst it lies curved. The planks were lightly sanded and given one coat of Danish oil and tree nails added in pencil. For this build I intend to sand, coat with one coat of Danish oil and rub in beeswax at the end. Noted a few oddities in the instructions already, one of which suggests bulkheads planked vertically with mahogany. Never seen this before so will plank horizontally as in many build logs. Also suggested this planking is done before the decks are added which I think would have needed trimming the planked decks. So will fit the decks and then plank the bulk heads.
The only bashing I intend to do is to cut out more gun ports to replace the metal stick on castings. Will try the method used in Half Moon using stub cannons glued into a block fixed to the bulkheads. Aim is for the cannon barrels to protrude from dark shadowy gun ports. If I can't get the planking right around the ports or the effect doesn't look good can always debash the kit.
Now for the fun, I have a decent camera but struggling to get a good lighting and spot in the house.
All comments welcome and I hope its of interest to the members, signing off for now.
Steve