Jump to content

texxn5

Members
 View Profile  See their activity

  • Posts

    2,473

  • Joined

  • Last visited

 Content Type 

Everything posted by texxn5

  1. texxn5
    Hi George, might put it in the gallery once I get some good outside pictures along with the Base and some other things I have in mind.
  2. texxn5
    a couple of more....Also, note: no scratch on copper side
  3. texxn5
    Managed to take a few pictures inside without all the background junk showing. Not sure if some people know, but if you click on a picture it blows it up quite nicely..!!!
  4. texxn5
    Hi George, I do not intend to cut and trim it, only to sand certain areas with a belt sander and keep it relatively rough and irregular, highlighting the light and dark areas on the outside surface, with the flat sanded surface to the bottom. I did this to make a mantle at a previous house with Mesquite wood. It is a real unique look and irregular....not the normal base for ships. It'll look a lot like a dark moderate sea with some wood colors coming out of it.
  5. texxn5
    I dug the wood slab for the base out of the garage and photographed it. It is a slab cut from the side of the restored Morgan's Bowsprit. The photos show top, bottom and roughcut Bowsprit from the Dupont Shipyard in Mystic, Ct. This is not finished yet and will be a couple of weeks yet. I have to get a belt sander for finishing it. It is 57"x15"x2". My understanding is that the tree this was cut from was a knocked down tree during Hurricane Katrina in '05 and given to Mystic Seaport to use on the restoration and preserve a 100+ year old tree. Quite a few truckloads of trees came to Mystic.
  6. texxn5
    I almost forgot the Flags....Got them done today. The American Flag w/26 stars and the J&R Wing Co Flag (they owned the ship for over 50 years) on the Main Mast. Now she's done...I also fixed my scratch on the hull. The flags have a piece of aluminum foil inside them and I am going to attempt to gets some furls in them hoping the foil will hold them in place???? They were tricky to make since they are not part of the kit.
  7. texxn5
    Thanks Dave, would love to see you guys again - come on out. She's a little big to pack up and put in our small trailer. We might wind up getting a 5th wheel trailer and do the Full Time RV lifestyle ... not sure yet - then I might have room...Hope you and Fran and your family had a very Merry Christmas.. John & Diane
  8. texxn5
    Hello Lester, you don't know just how much your comments mean to me. Without your assistance along the way, this journey would have been much more difficult and probably no where near accurate. We've known each other since early in the build and your comments critique and working knowledge have been invaluable. I'm sorry we missed each other in Ct. this summer but we'll be back again in the not to distant future. Thank you again, my friend, I'll have some good pictures shortly for you to give to the Wing's. I'm glad that I was able to be a part of MSW as well as starting my own website to document the process for those who follow.
  9. texxn5
    Thanks for all the like buttons and comments. Thanks Grant, she's not The Victory, but I am proud of her. I'm just happy I was able to do a respectable job and getting her completed.
  10. texxn5
    Thanks George, I wish I could put her in a case, but just don't have room...
  11. texxn5
    Thank you Piet...I'll catch up soon, now that I'm finished.....I've been rather involved the last few weeks.
  12. texxn5
    A couple of more......sorry for all the background junk...doesn't make for good pictures....better ones coming soon!
  13. texxn5
    THE MORGAN IS COMPLETED!! today, I finished the Cutting In Stage and got the boats mounted to the ship. I have a couple of touch ups to do, as well as the base, but the model is completed. Tomorrow, hopefully if the weather cooperates I'll take her outside and take some natural light pictures. All details on the whaleboats is on my website, but here are some overall pictures. I can't believe she's finished....April '13 got started. In shock - not real yet! .lol
  14. texxn5
    Here's a port and starboard view of the rigged ship. Details are on my website for those interested.
  15. texxn5
    Thanks Michael, George and Dave. I appreciate the kudos! Two more steps to go, The Cutting In Stage and mounting the boats. I finished the Braces today which completes all the rigging. thanks for stopping by.
  16. texxn5
    Managed to get the Fore Mast Braces completed, and moved to the Main Mast Braces. Finished the Main Topgallant Yard Braces. This leaves three sets of Main Mast Braces to complete the Running Rigging. This then leaves the Cutting in Stage and rigging the whaleboats to the Davits to finish up. Based on how I've been progressing, the Braces should be finished tomorrow, with the rest in the next few days.
  17. texxn5
    Hi George and Mark, yep - end's in sight....hard to believe after all this time....2-1/2 years + .....spiders are definitely busy...
  18. texxn5
    Started the Braces today. Got the Fore Topgallant Yard Braces and the Fore Upper Topsail Braces finished. Six more sets to go.
  19. texxn5
    Hello Tony, thanks for the input. Glad you're enjoying the pictures. Today I made a list of what is left to do so I can check them off as I progress (also so I don't forget something). Looks like 16 lines for Braces, cutting-in stage and lashing the boats down to the Davits and then the base. I'm working on the first set of braces right now so we'll see.
  20. texxn5
    Hello Chance, good to see you back. I try to take as many pictures as possible. As they say, "a picture is worth a thousand words". I don't post them all here, but instead try to show a broader picture of where I'm at and then if someone needs details or is working on a point I've covered they can refer to my website for the details. This way I don't bore people who only wish to see an update and not how I got there. Thanks and good luck with yours. You should start a log here on MSW. John http://www.charleswmorganmodel.com
  21. texxn5
    Hello Chris, welcome aboard. Thank you for the comment. It's been a long road, but the end is in sight.
  22. texxn5
    Thanks George
  23. texxn5
    Managed to finish all the Halyards and Downhauls. Time to move to the Braces. Here's a picture or two, gets hard to distinguish what's what with all the lines running. Gets tight for clumbsy fingers. Details are on my website for those interested.
  24. texxn5
    Hi Piet, thanks for stopping in. I'm enjoying the new camera. Here's to you and Gwen having Merry Christmas and a great new years also. I'll tip a few Leffe's your direction....proost!
  25. texxn5
    Hi George, yeah, I'm used to cameras with lots of functions, but this is only my second Nikon, so the symbols are different...just a slight learning curve. Like you say, most of this stuff I won't ever use. I never learned all the functions of my last one, but I did get 14 years out of it, and if I hadn't loaned it to a guy it would probably still be ok.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...